Nortel C3060 Portable Telephone User Guide

							C3060 Portable Telephone
User Guide
COMPANION 
						

							3C
ontents
Getting started  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5Using your telephone directory   . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Using your services directory  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15Using your headset   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Customizing your portable   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21Extra features  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Batteries and charging   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Accessories for your portable   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Safety information   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Technical specifications for USA  . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Caring for your portable   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Using your C3060 Portable with 
Meridian Companion   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45Using your C3060 Portable with 
Companion 200  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51Using your C3060 Portable with 
Norstar Companion   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 
						

							4 
						

							5
G
etting star ted
Before you use your portable for the first time, see Safety 
information on page 38. You should charge its battery pack 
overnight (See All about batteries and recharging 
on page 32).
The par ts of your 
por table
Volume switch
Softkeys
MuteNavigation keys
ServicesMenu Directory
Line
Power On/Off
Release calls
Terminate activity
Headset /data connector 
						

							6Tu r n  t h e  p o r t a b l e  o n
Press and hold the k button for at least two seconds.
Tu r n  t h e  p o r t a b l e  o f f
Press the k button for at least two seconds.
Por table screen icons
Note: The three buttons directly below your portable’s display are 
called softkeys. Their labels appear on the display with an underline 
above the button to which they are assigned. A softkey label is shown 
like this in this user guide:
 REDIAL
.
Setting your 
portable to ring
You can set your portable to one of three ring options by 
pressing the m button when the portable is idle. Select 
one of the softkeys for FULL
, CHIRP
, or NONE
 then press the 
OK
 softkey, or press the m button. J,I,H,G
Batter y strength indicators (strong to ver y weak)
p, Q, P
Radio signal strength indicator (strong to ver y weak)
×V
Vibrator indicator 
						

							7
FULL
 provides a normal ring volume and cadence. CHIRP
 
provides one short ring at low volume. NONE
 provides no 
audible ring.
Answering a call
Press the i button. When the portable is ringing, you 
can press the m button to stop the ringing/vibration and 
continue to answer the call.
Adjusting the ringing 
volume
When the phone is ringing, you can adjust the ringing 
volume with the volume switch. When the phone is not 
ringing, use the Menu to access the volume adjustment 
levels.
Adjusting the 
speaker volume
While on a call, pressing b or B can adjust the volume in 
twelve steps. The steps 0 to 8 raise the volume, with step 0 
the lowest volume. The steps 9 to 11 are for noisy 
environments. The display shows the volume step for two 
seconds as follows:
• after adjusting the volume
• before making or receiving a call at volume levels 9 to 11 
						

							8
.
Making a call
Dial the telephone number directly or: 
• dial from your directory (See Using your telephone 
directory on page 11) 
• predial (See Customizing your portable on page 21) 
• press a customized softkey (See Customizing softkeys on 
page 30) 
Accessing features 
during a call
You can access features or Computer Telephony 
Integration (CTI) applications while on a call, by three 
methods:
to increase volume, press here
to reduce volume, press here 
						

							9
1. Press m, then select the appropriate softkey and dial the 
access code digits.
2. Select an entry from your Services directory. (See Using 
your services directory on page 15.)
3. Dial a feature from a programmable On-a-call softkey. 
(See To assign a number to a softkey when the portable is 
on a call on page 30.)
Ending a call
Press the 
k
 button.
Making two calls in a 
row
Press 
NEXT
 after your first call. The portable maintains its 
radio connection for another call.
Keeping your 
connection
To maintain your call, stay in the radio coverage area. If you 
have problems with your connection, retrace your steps. The 
signal strength icon Q indicates if the signal is becoming 
stronger or weaker. 
						

							10Muting a call
To prevent your caller from hearing you, press m on the left 
side of the portable. The display shows Microphone muted 
and then i in j flashes. To end muting, press m again.
Redialing last 
number
Your portable is set up so that you can redial the last 
number you dialed by pressing 
REDIAL
 when it appears.
Dialing the last caller
You can view the names of the last two callers when 
LAST
 
appears on the display. Press 
LAST
 and , or . to view 
the names. Press > to view the number. Press 
DI A L
 to call 
the number or 
ERASE
 to delete the number. To add the 
name to the directory, press 
SAVE
.