Nortel C3060 Portable Telephone User Guide

21C
ustomizing your portable
Hint: Whenever you are searching through a list, you can press the 
first letter of the feature, directory, or system  entry you want. If there is 
m ore than one entry under a letter, press .
 
to keep looking.To customize your portable, use the Menu, which contains 
a number of features in alphabetical order.
Find a menu item
To search through the available options on the Menu press 
m
, 
,
 or 
.
.
Note: The portable displays options in several different ways.
Whenever the...

22Key click
1. Select Key click:.
2. Choose 
ON to hear a short beep when you press a button.
Keypad light
Your portable’s keypad and display light for low-light 
conditions. The keypad and display lights independent of 
key pad light settings when the portable rings. 
1. Select Keypad light:.
2. Choose 
ON to light the keypad when pressing a key.
You can extend battery life by leaving the keypad light 
OFF
 
when lighting is not required.
Key-protect
Key protect prevents accidently pressing the keys.
1....

23
2. Press >
, then 
,
 or 
.
 
to move between the In 
English and  selections. 
3. Press 
SELCT
 or 
SƒL
, to select your choice.
Last caller
See Last caller on page 26.
Line select
To check that a number is correct before you dial, set up 
your portable for predialing.
1. Choose Line selct:.
2. Select 
MANUAL
, k
.
3. Enter the telephone number, which may be edited using 
BKSP
.
4. Press i
 to dial your call or 
SAVE
 to store it in your 
directory.
Note: You can insert a pause or a link into a...

24Message ser vice
See Message Service on page 27
Program softkeys
See Program softkeys on page 30
Ringer
1. Select Ringer:.
2. Press FULL
 for a normal ring volume and cadence.
3. Press CHIRP for one short ring at low volume.
4. Press NONE for no audible ring.
Ring types
1. Select Ring types>.
2. Press >, 
,
 or 
. 
to hear samples.
3. Press 
SELCT
 to choose a new ring type, k.
Ringer volume
1. Select Ringer volume>.
2. Press > , 
,
 or 
.
, to hear samples or press a number 
from 1 to 5.
3. Press...

25E
xtra features
Find a menu item
To search through the available options on the Menu press 
m, 
,
 or 
.
.
Note: The portable displays options in several different ways.
Whenever the display shows a heading followed by a colon, as in Vi b r a t o r :  O n
, you can select the underlined softkey, 
OFF
 in this 
case, to switch to the other option.
Whenever the display shows a heading followed by 
>, as in 
Language>
, press 
> 
to enter a m enu of options which you can 
then m ove through by pressing...

26
You can put CTI feature codes, or system feature codes, or 
telephone numbers into your Services directory.
Last caller
If your system supports calling line ID, the last caller list 
shows the last two incoming calls.
1. Select Last caller:.
2. Press 
LAST
 to choose the last caller.
3. Press 
SAVE
 to save the last caller in the telephone 
directory.
4. Press 
ERASE
 to erase the last caller from the last caller 
list.
5. Press 
END
 to return to the idle display.
Long tones
1. Select Long tones:.
2....

27
Note: Not all system s support this feature. (See your system  
adm inistrator for features your system  supports.)
Message waiting
Some systems allow your portable to display Message
waiting if you have a voice mail message. 
Even if your system does not support Message Waiting 
indication, you can set up your portable with Message 
Service to dial directly into your voice mailbox.
Message Ser vice
First, store a message service code. See To store your 
message service code on page 28.
1. Press...

28
Note: If you press 
CALL
, and you want to use your active softkeys, 
press 
EXIT
. 
Depending on your voice mail system, you may be required to
change the dial codes. Dial codes are the numbers used to access
voice mail system features. For example, the default dial code 76
deletes a message. If your voice mail system is Meridian Mail,
you do not have to change the dial codes. If you change your
message service code, you will have to change the dial codes as
required.
To store your message ser vice...

29
4. The display shows Dialcodes?Note: 
Dialcodes? 
is only displayed after you first store the 
m essage service code. If you erase your m essage service code, you 
will have to go through dial codes again and change as required.
Hint: For m ost Meridian Voice Mail system s, select 
DEFAULT
. For 
Norstar Com panion system s that support integrated voice m ail, select 
NO. On som e Norstar Com panion system s, m essage service m ay work 
differently. (See your system  adm inistrator for assistance.)5....

30Program softkeys
For direct, one-touch access to frequently used features or 
frequently called numbers, customize your softkeys.
You can program the softkeys for use when the portable is 
idle or is on a call.
Softkeys not programmed keep their default values when 
the portable is idle or is on a call.
The default idle softkeys are 
REDIAL
, MAIL
 and 
LAST
. The 
default on a call softkeys are 
NEXT
, LINK
 and 
SAVE
. 
To assign a number to a softkey for use when the 
por table is idle or on a call...