Nokia Lps5 Manual

Get started
11
If pairing is successful, the loopset appears in the menu of your device 
where you can view the currently paired Bluetooth devices.
When the loopset is connected to your device and is ready for use, the 
indicator light slowly flashes blue.
You can pair the loopset with up to eight devices but connect it to only 
one device at a time.
Disconnect the loopset
To disconnect the loopset from your device, switch off the loopset, or 
disconnect it in the Bluetooth menu of your device.
You do...

Basic use
12
3. Basic use
■Set up
Ensure that the loopset is paired and 
connected to your phone or music player.
Detach one end of the loop from the loopset, 
place the loop around your neck, and plug the 
loop end back into the loopset.
Switch your hearing aid to T mode.
Wear the loopset around your neck when you use it with your hearing aid.
■Adjust the loopset volume
To adjust the strength of the magnetic field that the loopset produces for 
the hearing aid, press a volume key during a call or while...

Basic use
13
■Select vibration mode
You can set the loopset to vibrate in different situations.
To select the desired vibration mode during a call (when there is no other 
call waiting or on hold), press and hold the multifunction key for about 
2 seconds one or more times:
 If the loopset beeps once, the loopset vibrates when you press a key or 
receive a call.
 If the loopset beeps twice, the loopset vibrates when you press a key.
 If the loopset beeps three times, the loopset vibrates when you...

Basic use
14
■Manage two calls
To use these features, your mobile device must support the Bluetooth 
Hands-Free Profile 1.5, and call waiting must be activated in the device. 
Call waiting is a network service.
To answer a waiting call and end the active call, press the 
multifunction key.
To answer a waiting call and put the active call on hold, press and hold the 
multifunction key for about 2 seconds.
To end the active call and make the call on hold active, press the 
multifunction key.
To switch...

Basic use
15
■Clear settings or reset
To clear your pairing, loopset volume, sidetone, and vibration mode 
settings from the loopset, switch on the loopset, and press and hold the 
multifunction key and the volume up key for about 5 seconds. The 
indicator light alternates red, green, and blue twice, and the loopset 
enters pairing mode.
To reset the loopset if it stops functioning, even though it is charged, 
connect the loopset to a charger while you press and hold the 
multifunction key. The reset...

Battery and charger information
16
4. Battery and charger information
This device has an internal, nonremovable, rechargeable battery. Do not attempt to 
remove the battery from the device as you may damage the device. This device is 
intended for use when supplied with power from the following chargers: AC-8 and 
DC-9. The exact charger model number may vary depending on the type of plug. 
The plug variant is identified by one of the following: E, EB, X, AR, U, A, C, or UB. The 
battery can be charged...

Battery and charger information
17
Important: Battery talk and standby times are estimates only and depend 
on the type of the connected device, features used, battery age and 
condition, temperatures to which battery is exposed, and many other 
factors. The amount of time a device is used for calls will affect its 
standby time. Likewise, the amount of time that the device is turned on 
and in the standby mode will affect its talk time. 

Care and maintenance
18
Care and maintenance
Your device is a product of superior design and craftsmanship and should 
be treated with care. The following suggestions will help you protect your 
warranty coverage.
 Keep the device dry. Precipitation, humidity, and all types of liquids or moisture 
can contain minerals that will corrode electronic circuits. If your device does 
get wet, allow it to dry completely.
 Do not use or store the device in dusty, dirty areas. Its moving parts and 
electronic...

Care and maintenance
19
Recycle
The crossed-out wheeled-bin symbol on your product, battery, literature, or 
packaging reminds you that all electrical and electronic products, batteries, 
and accumulators must be taken to separate collection at the end of their 
working life. This requirement applies in the European Union. Do not 
dispose of these products as unsorted municipal waste. For more 
environmental information, see the product Eco-Declarations at 
www.nokia.com/environment.
Always return your...