Nokia Lps5 Manual

							Nokia Wireless Loopset LPS-5
User Guide
9212931
Issue 2 EN 
						

							DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this LPS-5 product is in compliance 
with the essential requirements and other relevant provisions of Directive 
1999/5/EC. A copy of the Declaration of Conformity can be found at 
http://www.nokia.com/phones/declaration_of_conformity/.
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or 
registered trademarks of Nokia Corporation. Other product and company names mentioned 
herein may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in 
any form without the prior written permission of Nokia is prohibited.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and 
improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES 
SHALL NOKIA OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME 
OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER 
CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY 
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, 
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS 
OF THIS DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW 
IT AT ANY TIME WITHOUT PRIOR NOTICE.
The availability of particular products may vary by region. Please check with your Nokia dealer 
for details. 
						

							Export controls
This device may contain commodities, technology or software subject to export laws and 
regulations from the US and other countries. Diversion contrary to law is prohibited.
9212931/Issue 2 EN 
						

							4
Contents
1. Introduction .........................  5Bluetooth wireless technology...........  6
2. Get started ...........................  7Keys and parts.........................................  7
Charge the battery ................................  8
Switch the loopset on or off...............  9
Switch on ..............................................  9
Switch off .............................................  9
Pair and connect to another 
device ........................................................  9
Disconnect the loopset ..................  11
Reconnect the loopset ...................  11
3. Basic use .............................  12Set up .....................................................  12
Adjust the loopset volume................  12
Adjust the sidetone volume .............  12
Select vibration mode ........................  13
Calls ........................................................  13
Manage two calls ................................  14
Listen to music.....................................  14
Clear settings or reset........................  15
Troubleshooting ...................................  15
4. Battery and charger 
information ............................  16
Care and maintenance ...........  18 
						

							Introduction
5
1. Introduction
The Nokia Wireless Loopset LPS-5 is designed for people with hearing aids 
to use their compatible mobile phone or music player together with a 
telecoil (T-coil) equipped hearing aid. 
When using the loopset for calling, you can speak directly into the 
internal microphone, and you do not need to hold the phone near 
your ear.
You can use this inductive loopset with compatible devices that support 
Bluetooth wireless technology. The loopset wirelessly transmits sound 
from the phone to a hearing aid that is in T mode. The quality of sound 
depends on the type of hearing aid used and is affected by 
electromagnetic disturbances from the surroundings.
Read this user guide carefully before using the loopset. Also, read the user 
guide for the device that you connect to the loopset.
For the latest version of the user guide and additional information related 
to your Nokia product, see www.nokia.com/support or your local Nokia 
website. For more information about loopsets and other accessibility 
solutions, see www.nokiaaccessibility.com (in English).
The product may contain small parts. Keep them out of the reach of small 
children.
The surface of this device is nickel-free. 
						

							Introduction
6
■Bluetooth wireless technology
Bluetooth wireless technology allows you to 
connect compatible devices without cables. 
The loopset and the other device do not need 
to be in line of sight, but they should be within 
10 metres (33 feet) of each other. The closer the 
loopset and the other device are to each other, 
the better the performance. The optimal 
operating range is shown in dark grey in the 
picture. The connection is subject to interference from distance and 
obstructions (shown in light grey) or other electronic devices.
The loopset is compliant with the Bluetooth Specification 2.1 + EDR 
supporting the Headset Profile 1.1, the Hands-Free Profile (HFP) 1.5, 
and the Advanced Audio Distribution Profile (A2DP) 1.0. Check with 
the manufacturers of other devices to determine their compatibility 
with this device.

						

							Get started
7
2. Get started
■Keys and parts
The loopset contains the following parts:
1. Neck loop
2. Indicator light (inside the rubber 
sleeve at the top)
3. Volume keys
4. Microphone
5. Multifunction key
6. Charger connector
Before using the loopset, you must 
charge the battery and pair the loopset 
with a compatible device.
Parts of the device are magnetic. Metallic materials may be attracted to the device. 
Do not place credit cards or other magnetic storage media near the device, because 
information stored on them may be erased.
1
11
1
4
6
35
2 
						

							Get started
8
■Charge the battery
Before charging the battery, carefully read “Battery and charger 
information”, p. 16.
Warning: Use only chargers approved by Nokia for use with this 
particular model. The use of any other types may invalidate any 
approval or warranty, and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the plug, not 
the cord.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger 
connector. The indicator light is red during 
charging.
Charging the battery fully may take up to 
1 hour.
3. When the battery is fully charged, the 
indicator light turns green. Disconnect the charger from the loopset, 
then from the wall outlet.
The fully charged battery has power for up to 6 hours of talk time or up to 
110 hours of standby time.
When the battery is discharged, the loopset beeps about every 5 minutes, 
and the indicator light slowly flashes red. 
						

							Get started
9
■Switch the loopset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds. 
The loopset vibrates once and plays an ascending sequence of beeps, and 
the green indicator light is displayed. The loopset tries to connect to the 
last used device. 
When the loopset is connected to your device and is ready for use, the 
indicator light slowly flashes blue. If the loopset has not been paired with 
a device, it automatically enters pairing mode (see “Pair and connect to 
another device”, p. 9).
Switch off
To switch off, press and hold the multifunction key for over 5 seconds. The 
loopset vibrates twice and plays a descending sequence of beeps, and the 
red indicator light is briefly displayed. 
If the loopset is not connected to a paired device within about 
30 minutes, it switches off automatically.
■Pair and connect to another device
If your phone supports the A2DP Bluetooth profile and has a music player 
feature, you can use the phone to also play music through the loopset.
If your phone does not support the A2DP Bluetooth profile, you can 
separately pair the loopset with the phone and a music player that  
						

							Get started
10
supports this profile. If you have paired and connected the loopset to 
your phone, disconnect the loopset before pairing the loopset with the 
music player.
1. Ensure that your phone or music player is switched on.
2. To pair the loopset if it has not been previously paired with a device, 
switch on the loopset. The loopset enters pairing mode, and the 
indicator light quickly flashes blue.
To pair the loopset if it has been previously paired with another device, 
ensure that the loopset is switched off, and press and hold the 
multifunction key (for over 5 seconds) until the indicator light quickly 
flashes blue.
3. Within about 5 minutes, activate the Bluetooth feature on your phone 
or music player, and set it to search for Bluetooth devices. For details, 
see the user guide of your device.
If the pairing is not initiated within about 5 minutes, the loopset 
switches off.
4. Select the loopset (Wireless Loopset LPS-5) from the list of found 
devices on your phone or music player.
5. If necessary, enter the passcode 0000 to pair and connect the loopset 
to your device. If your device does not have a keypad, it may use this 
passcode by default.
In some devices, you may need to make the connection separately 
after pairing.