Nokia Lps5 Manual

Nokia Wireless Loopset LPS-5
User Guide
9212931
Issue 2 EN 

DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this LPS-5 product is in compliance 
with the essential requirements and other relevant provisions of Directive 
1999/5/EC. A copy of the Declaration of Conformity can be found at 
http://www.nokia.com/phones/declaration_of_conformity/.
© 2009 Nokia. All rights reserved.
Nokia, Nokia Connecting People and the Nokia Original Accessories logo are trademarks or 
registered trademarks of Nokia Corporation. Other product and company names...

Export controls
This device may contain commodities, technology or software subject to export laws and 
regulations from the US and other countries. Diversion contrary to law is prohibited.
9212931/Issue 2 EN 

4
Contents
1. Introduction .........................  5Bluetooth wireless technology...........  6
2. Get started ...........................  7Keys and parts.........................................  7
Charge the battery ................................  8
Switch the loopset on or off...............  9
Switch on ..............................................  9
Switch off .............................................  9
Pair and connect to another 
device...

Introduction
5
1. Introduction
The Nokia Wireless Loopset LPS-5 is designed for people with hearing aids 
to use their compatible mobile phone or music player together with a 
telecoil (T-coil) equipped hearing aid. 
When using the loopset for calling, you can speak directly into the 
internal microphone, and you do not need to hold the phone near 
your ear.
You can use this inductive loopset with compatible devices that support 
Bluetooth wireless technology. The loopset wirelessly transmits sound 
from...

Introduction
6
■Bluetooth wireless technology
Bluetooth wireless technology allows you to 
connect compatible devices without cables. 
The loopset and the other device do not need 
to be in line of sight, but they should be within 
10 metres (33 feet) of each other. The closer the 
loopset and the other device are to each other, 
the better the performance. The optimal 
operating range is shown in dark grey in the 
picture. The connection is subject to interference from distance and 
obstructions (shown...

Get started
7
2. Get started
■Keys and parts
The loopset contains the following parts:
1. Neck loop
2. Indicator light (inside the rubber 
sleeve at the top)
3. Volume keys
4. Microphone
5. Multifunction key
6. Charger connector
Before using the loopset, you must 
charge the battery and pair the loopset 
with a compatible device.
Parts of the device are magnetic. Metallic materials may be attracted to the device. 
Do not place credit cards or other magnetic storage media near the device, because...

Get started
8
■Charge the battery
Before charging the battery, carefully read “Battery and charger 
information”, p. 16.
Warning: Use only chargers approved by Nokia for use with this 
particular model. The use of any other types may invalidate any 
approval or warranty, and may be dangerous.
When you disconnect the power cord of any accessory, grasp and pull the plug, not 
the cord.
1. Connect the charger to a wall outlet.
2. Connect the charger cable to the charger 
connector. The indicator light is...

Get started
9
■Switch the loopset on or off
Switch on
To switch on, press and hold the multifunction key for about 2 seconds. 
The loopset vibrates once and plays an ascending sequence of beeps, and 
the green indicator light is displayed. The loopset tries to connect to the 
last used device. 
When the loopset is connected to your device and is ready for use, the 
indicator light slowly flashes blue. If the loopset has not been paired with 
a device, it automatically enters pairing mode (see “Pair and...

Get started
10
supports this profile. If you have paired and connected the loopset to 
your phone, disconnect the loopset before pairing the loopset with the 
music player.
1. Ensure that your phone or music player is switched on.
2. To pair the loopset if it has not been previously paired with a device, 
switch on the loopset. The loopset enters pairing mode, and the 
indicator light quickly flashes blue.
To pair the loopset if it has been previously paired with another device, 
ensure that the loopset...