Nokia 6120c1 User Manual

							81
To connect to a server and receive configuration settings for your phone, scroll to 
the server profile, and select Options> Start configuration.
To edit a server profile, select Options> Edit profile and from the following 
settings:
Allow configuration—To receive configuration settings from the server, select Yes.
Auto-accept all requests —If you want the phone to ask for confirmation before 
accepting a configuration from the server, select No.
Contact your service provider, or company information management department 
for the other server profile settings.
Update software
Warning: If you install a software update, you cannot use the device, even to 
make emergency calls, until the installation is completed and the device is 
restarted. Be sure to back up data before accepting installation of an update.
Remember to save backups of important personal information and files (such as 
contacts, images and messages) before updating the software.
To check the current version of the software, select Menu> Settings> 
Data mgr.> Device mgr. > Updates.
1. Select Menu> Settings> Data mgr.> Device mgr. > Updates> Options> 
Check for updates.
If update is available, the device starts downloading it.
2. After a successful download, answer Yes to the confirmation query to continue 
the installation. To start the installation later, select No.
To start the installation process later, select Menu> Settings> Data mgr.> 
Device mgr.> Options > Install update.
If the server profile is defined, it is used as a default. If no server profile has been 
defined, the device asks you to create one, or if there are several, to select from a 
list of servers.
Contact your service provider for server profile settings.
■Application manager
You can install two types of applications and software to your phone:
J2ME
TM applications based on JavaTM technology with the extension .jad 
or .jar. PersonalJavaTM applications cannot be installed on your phone. 
						

							82
Other applications and software suitable for the Symbian operating 
system. The installation files have the .sis extension. Only install software 
specifically designed for your phone.
Installation files may be transferred to your phone from a compatible computer, 
downloaded during browsing, or sent to you in a multimedia message, as an 
e-mail attachment or by using Bluetooth. You can use Nokia Application Installer 
in Nokia PC Suite to install an application to your phone or a memory card.
To open App. manager, select Menu> Settings> Data mgr.> App. mgr..
Install an application
Important: Only install and use applications and other software from trusted 
sources, such as applications that are Symbian Signed or have passed the Java 
Verified
TM testing.
Before installation, in App. manager, scroll to the installation file, and select 
Options> View details to view information such as the application type, version 
number, and the supplier or manufacturer of the application.
The .jar file is required for installing Java applications. If it is missing, the phone 
may ask you to download it.
To install an application or software package:
1. Scroll to an installation file. Applications on the memory card are indicated 
with .
2. Select Options> Install.
Alternatively, search the phone memory or the memory card, select the 
application, and press the scroll key to start the installation.
During the installation, the phone shows information about the progress of the 
installation. If you are installing an application without a digital signature or 
certification, the phone displays a warning. Continue installation only if you 
are sure of the origins and contents of the application.
To view extra information about the application, scroll to it, and select Options> 
Go to web address. This option may not be available with all applications.
To see what software packages have been installed or removed and when, select 
Options> View log. 
						

							83
Remove an application
In the App. manager main view, scroll to the software package, and select 
Options> Remove.
Application manager settings
In App. manager, select Options> Settings and from the following settings:
Software installation—to select if you want to allow installation of all Symbian 
applications (All) or only signed applications (Signed only)
Online certificate check—to select if you want App. manager to check the online 
certificates for an application before installing it
Default web address—default address used when checking online certificates
Java applications may attempt to, for example, establish a data connection or 
send a message. To edit the permissions of an installed Java application and define 
which access point the application will use, in the main view, scroll to the 
application, and select Options> Open.
■Activation keys
Digital rights management
Content owners may use different types of digital rights management (DRM) technologies 
to protect their intellectual property, including copyrights. This device uses various types of 
DRM software to access DRM-protected content. With this device you can access content 
protected with OMA DRM 2.0 and OMA DRM 1.0. If certain DRM software fails to protect 
the content, content owners may ask that such DRM softwares ability to access new DRM-
protected content be revoked. Revocation may also prevent renewal of such DRM-protected 
content already in your device. Revocation of such DRM software does not affect the use of 
content protected with other types of DRM or the use of non-DRM-protected content.
Digital rights management (DRM) protected content comes with an associated activation 
key that defines your rights to use the content.
If your device has OMA DRM protected content, to back up both the activation keys and the 
content, use the backup feature of Nokia PC Suite. Other transfer methods may not transfer 
the activation keys which need to be restored with the content for you to be able to 
continue the use of OMA DRM protected content after the device memory is formatted. You 
may also need to restore the activation keys in case the files on your device get corrupted.
Some activation keys may be connected to a specific SIM card, and the protected content 
can be accessed only if the SIM card is inserted in the device. 
						

							84
Select Menu> Settings> Data mgr.> Actv. keys to view the digital rights 
activation keys saved in your phone.
To view valid keys ( ) that are connected to one or more media files, select Valid 
keys. Group keys, which contain several keys, are indicated with . To view the 
keys contained in the group key, select the group key.
To view invalid keys ( ) with which the time period for using the file is exceeded, 
select Invalid keys. To buy more usage time or extend the usage period for a media 
file, select an invalid key and Options> Get new key. It may not be possible to 
update activation keys if web service message reception is disabled. See “Service 
message settings,” p. 40.
To view activation keys that are not in use, select Not in use. Unused activation 
keys have no media files connected to them.
To view detailed information such as the validity status and the ability to send the 
file, scroll to an activation key, and select it.
15. Connectivity
■Data transfer
With data transfer you can copy or synchronize contacts, calendar entries, and 
possibly other data, such as video clips and images, from a compatible phone 
using a Bluetooth connection.
Depending on the other phone, synchronization may not be possible and data can 
be copied only once.
To transfer or synchronize data, do the following:
1. Select Menu> Settings> Connectivity> Transfer. If you have not used 
Transfer before, information about the application is displayed. Select 
Continue to start transferring data.
If you have used Transfer, select Transfer data.
2. When using Bluetooth, the phones need to be paired in order to transfer data.
Depending on the type of the other phone, an application may be sent and 
installed on the other phone to enable the data transfer. Follow the 
instructions.
3. Select what content you want to be transferred to your phone. 
						

							85
4. Content is transferred to your phone. The transfer time depends on the amount 
of data. You can stop the transfer and continue later.
■PC Suite
You can use your phone with a variety of PC connectivity and data 
communication applications. With PC Suite you can synchronize contacts, 
calendar and to-do notes and notes between your phone and a compatible PC.
You may find more information about PC Suite and the download link in the 
support area on the Nokia website, www.nokia.com/pcsuite.
■Bluetooth connection
Bluetooth technology enables wireless connections between electronic devices 
within a maximum range of 10 meters (33 feet). A Bluetooth connection can be 
used to send images, videos, text, business cards, calendar notes, or to connect 
wirelessly to compatible devices using Bluetooth technology, such as computers.
This device is compliant with Bluetooth Specification 2.0 supporting the following profiles: 
Dial Up Networking, Serial Port, File Transfer, Object Push, Handsfree, Headset, SIM Access, 
Generic Access, and Advanced Audio Distribution. To ensure interoperability between other 
devices supporting Bluetooth technology, use Nokia approved enhancements for this model. 
Check with the manufacturers of other devices to determine their compatibility with this 
device.
There may be restrictions on using Bluetooth technology in some locations. Check with your 
local authorities or service provider.
Features using Bluetooth technology, or allowing such features to run in the background 
while using other features, increase the demand on battery power and reduce the battery 
life.
Bluetooth connection settings
Select Menu> Settings> Connectivity> Bluetooth.
When you activate Bluetooth technology for the first time, you are asked to give a 
name to your phone.
Bluetooth—to switch Bluetooth on or off.
My phones visibility> Shown to all—to allow your phone to be found by other 
Bluetooth devices at all times. To allow your phone to be found for a defined time 
period, select Define period. For security reasons it is advisable to use the Hidden 
setting whenever possible. 
						

							86
My phones name—to define a name for your phone.
Remote SIM mode> On—to enable the usage of the SIM card of the phone by 
another device (for example, a car kit) by Bluetooth technology (SIM access 
profile)
When the wireless device is in the remote SIM mode, you can only use a compatible 
connected enhancement, such as a car kit, to make or receive calls. Your wireless device will 
not make any calls, except to the emergency numbers programmed into your device, while in 
this mode. To make calls from your device, you must first leave the remote SIM mode. If the 
device has been locked, enter the lock code to unlock it first.
Send data
There can be only one active Bluetooth connection at a time.
1. Open an application where the item you wish to send is saved.
2. Scroll to the item you want to send, and select Options> Send> Via 
Bluetooth.
3. The phone starts to search for devices within range. Paired devices are shown 
with .
When searching for devices, some devices may show only the unique device 
addresses. To find out the unique address of your phone, enter the code 
*#2820# in the standby mode.
If you have searched for devices earlier, a list of the devices that were found 
previously is shown first. To start a new search, select More devices. If you 
switch off the phone, the list of devices is cleared, and the device search needs 
to be started again before sending data.
4. Select the device with which you want to connect.
5. Pair the devices
 If the other device requires pairing before data can be transmitted, a tone 
sounds and you are asked to enter a passcode.
 Create your own passcode (1–16 digits) and agree with the owner of the 
other device to use the same code. You do not have to memorize the 
passcode.
 After pairing, the device is saved to the Paired devices view.
6. When the connection has been successfully established, the note Sending data 
is displayed.
Data received using Bluetooth connection can be found in Inbox in Messaging. 
						

							87
Paired devices view
Paired devices are indicated by   in the search result list. In the Bluetooth main 
view, scroll right to open a list of paired devices.
Do not accept Bluetooth connections from sources you do not trust.
To pair with a device, select Options> New paired device. Select the device with 
which to pair. Exchange passcodes.
To cancel pairing, scroll to the device whose pairing you want to cancel, and press 
the clear key. If you want to cancel all pairings, select Options> Delete all.
To set a device to be authorized, scroll to the device, and select Options> Set as 
authorised. Connections between your phone and the authorized device can be 
made without your knowledge. No separate acceptance or authorization is 
needed. Use this status only for your own devices to which others do not have 
access, for example, your PC or devices that belong to someone you trust.   is 
added next to authorized devices in the Paired devices view. If you select Set as 
unauthorised, each connection request from the device must be accepted 
separately.
Receive data
When you receive data using Bluetooth technology, a tone sounds, and you are 
asked if you want to accept the message. If you accept, the item is placed in Inbox 
in Messaging.
Disconnect Bluetooth connection
A Bluetooth connection is disconnected automatically after sending or receiving 
data.
■USB connection
You can use the USB data cable to transfer data between the phone and a 
compatible PC. You can also use the USB data cable with Nokia PC Suite.
Select Menu> Settings> Connectivity> USB. To select the default USB 
connection mode, select USB mode and the desired mode. To have the device ask 
the purpose of the connection each time the cable is connected, select Ask on 
connection> Yes.
To use the phone with Nokia PC Suite, select PC Suite. To synchronize media files, 
such as music, with a compatible version of Windows Media Player, select Media  
						

							88
player. To access files on the inserted memory card as a removable drive, select 
Data transfer.
After transferring data, ensure that it is safe to unplug the USB data cable from 
the PC.
■Remote synchronization
Sync enables you to synchronize your calendar, contacts, or notes with various 
calendar and address book applications on a compatible computer or on the 
internet. The synchronization application uses SyncML technology for 
synchronization.
Select Menu> Settings> Connectivity> Sync.
Create a new synchronization profile
1. If no profiles have been defined, the phone asks you if you want to create a 
new profile. Select Yes.
To create a new profile in addition to existing ones, select Options> New sync 
profile. Choose whether you want to use the default setting values or copy the 
values from an existing profile to be used as the basis for the new profile.
2. Define the Applications to be synchronized.
Select an application, and edit the synchronization settings:
Include in sync—to enable or disable the synchronization
Remote database—the name of the used remote database
Synchronisation type—Select Both ways for synchronization of the data on 
your phone and the remote database, To phone only for the synchronization of 
the data on your phone only, or To server only for the synchronization of the 
data on the remote database only.
3. Define the Connection settings :
Server version, Server ID, Data bearer, Host address, Port, User name, and 
Password—Contact your service provider or system administrator for the 
correct settings.
Access point—Only visible if Internet i s se l e ct e d  as  Data bearer. Select an 
access point you want to use for the data connection.
Allow sync requests> Yes—to allow that the server starts the synchronization 
						

							89
Accept all sync requests> No—to require a confirmation before the server 
starts the synchronization
Network authentication—Only visible if Internet is selected as Data bearer. To 
use HTTPS authentication, select Yes, and enter user name and password in 
Network user name and Network password.
Synchronize data
In the main view, scroll to a profile, and select Options> Synchronise. The status 
of the synchronization is shown.
After synchronization is complete, select Options> View log to open a log file 
showing the synchronization status (Complete or Incomplete) and how many 
calendar or contact entries have been added, updated, deleted, or discarded (not 
synchronized) in the phone or on the server.
■Push to talk
Push to talk (PTT) (network service) is a real-time voice over IP service (network 
service) available over a GSM/GPRS network. PTT provides direct voice 
communication connected with a single keypress.
Before you can use the PTT service, you must define the PTT access point and PTT 
settings.
In PTT communication, one person talks while the others listen. Speakers take 
turns responding to each other. Only one group member can talk at a time. The 
length of time of each turn is limited.
Phone calls always take priority over PTT calls.
Besides the packet data counters, the phone registers only one-to-one calls in the 
recent calls lists in Log. The participants should confirm the reception of any 
communications where appropriate as there is no other confirmation of whether 
the recipients have heard the call.
To check availability and costs, and to subscribe to the service, contact your 
service provider. Note that roaming services may be more limited than home 
network services.
Many of the services available for traditional voice calls (for example, call 
mailbox) are not available for PTT communications. 
						

							90
Define a PTT access point
Many service providers require you to use an internet access point for your default 
access point. Other service providers allow you to use a WAP access point.
Settings for PTT
For PTT service settings, contact your service provider.
To view and change PTT settings, select Menu> Settings> Connectivity> PTT> 
Options> Settings> User settings or Connection settings.
User settings
Accepted list calls—To see a notification of incoming calls, select Notify. To answer 
PTT calls automatically, select Auto-accept. If you do not want to receive PTT calls, 
select Not allowed.
PTT call alert tone—Select the tone for incoming PTT calls. If you want the 
incoming call alert setting for PTT to follow your profile settings, select Set by 
profile. For example, if your profile is silent, PTT is set to do not disturb (DND) and, 
except for callback requests, you are not available to others using PTT.
Callback request tone—Select a tone for callback requests.
Application start-up—To start PTT automatically, select Always automatic. To start 
PTT automatically only while in your home network, select Auto. in home netw..
Default nickname—Enter your nickname shown to other users. Your service 
provider may have disabled the editing of this option.
Show my PTT address—Select Never if you want to hide your PTT address from 
others.
Show my login status—Select whether your status is shown to others.
Connection settings
Contact your PTT service provider for the connection settings.
Log in to PTT
Select Menu> Settings> Connectivity> PTT. PTT automatically logs in to the 
service when started.
When log in is successful, PTT automatically connects to channels that were 
active when the application was last closed. If the connection is lost, the device 
automatically tries to log back in until you exit PTT.