Nokia 6120c1 User Manual

							21
■Connect a USB data cable
To set the default USB connection mode, 
select Menu> Settings > Connectivity> 
USB> USB mode and the desired mode. To 
set whether the default mode is activated 
automatically, select Ask on connection> 
No.
■Attach a wrist strap
Connect the wrist strap according to the graphic.
For instructions on removing the back cover, see 
step 1 in “Insert a SIM or USIM card and battery,” p. 
9.
3. Call functions
■Make a voice call
1. In the standby mode, enter the phone number, including the area code. Press 
the clear key to remove a number.
For international calls, press * twice for the international prefix (the + 
character replaces the international access code), and enter the country code, 
area code (omit the leading zero if necessary), and phone number.
2. To call the number, press the call key.
To adjust the volume during the call, press the volume keys.
3. To end the call, or to cancel the call attempt, press the end key.
To make a call from Contacts, select Menu> Contacts. Scroll to the desired name; 
or enter the first letters of the name, and scroll to the desired name. To call the 
number, press the call key. 
						

							22
To call a recently dialed number, press the call key in the standby mode. The list of 
the last 20 numbers you called or attempted to call is shown. Scroll to the number 
you want, and press the call key.
To make a push to talk call, see “Push to talk,” p. 89.
Call mailbox
To call your call mailbox (network service), press and hold 1 in the standby mode.
Call mailbox is a network service. Contact your service provider for the call 
mailbox number.
To define the call mailbox number if no number is set, select Menu> Settings> 
Call mailbox, and when Voice mailbox number: is displayed, enter the voice 
mailbox number.
To change the call mailbox number, select Menu> Settings> Call mailbox> 
Options> Change number, and enter the number. 
Speed dialing
Speed dialing is a quick way to call frequently used numbers in the standby mode. 
You can assign a phone number to the speed dialing keys, 2 to 9. The 1key is 
reserved for the call mailbox. 
1. Select Menu> Contacts and a contact.
2. Scroll to a number, and select Options> Assign speed dial. Scroll to the desired 
speed dialing key, and select Assign. When you return to the contact 
information view,   next to the number indicates the assigned speed dial.
Call a speed dialing number in either of the following ways:
 Press the speed dialing key, then the call key.
If Speed dialling is set to On, press and hold the speed dialing key until the call 
begins. To set Speed dialling to On, select Menu> Settings> Phone sett.> 
Phone> Call> Speed dialling> On.
To view the number assigned to a speed-dialing key, select Menu> Settings> 
Speed dial, scroll to the key icon and select Options> View number. 
Voice dialing
A voice tag is added automatically to all entries in Contacts.
Use long names, and avoid similar names for different numbers. 
						

							23
Voice tags are sensitive to background noise. Use voice tags in a quiet environment.
Note: Using voice tags may be difficult in a noisy environment or during an 
emergency, so you should not rely solely upon voice dialing in all circumstances.
1. In the standby mode, press and hold the right selection key. A short tone is 
played, and Speak now is displayed.
If you are using a compatible headset with the headset key, press and hold the 
headset key.
2. Speak the voice command clearly. The phone plays the voice command of the 
best match. After 1.5 seconds, the phone dials the number; if the result is not 
the correct one, before dialing select Next and another entry.
Using voice commands to carry out a phone function is similar to voice dialing. 
See “Voice commands,” p. 78.
Make a conference call
1. To make a conference call (network service), make a call to the first 
participant.
2. To make a call to another participant, select Options> New call. The first call 
is automatically put on hold.
3. To join the first participant in the conference call when the new call is 
answered, select Options> Conference.
To add a new person to the call, repeat step 2, and select Options> 
Conference> Add to conference. The phone supports conference calls between 
a maximum of six participants, including yourself.
4. To have a private conversation with one of the participants, select Options> 
Conference> Private. Select a participant and Private. The conference call is 
put on hold on your phone. The other participants can still continue the 
conference call. To return to the conference call, select Options> Add to 
conference.
5. To drop a participant, select Options> Conference> Drop participant, scroll to 
the participant, and select Drop. 
6. To end the conference call, press the end key.
■Answer or reject a voice call
To answer a call, press the call key.  
						

							24
To adjust the volume during the call, press the volume keys.
To mute the ringing tone, select Silence.
Tip: If a compatible headset is connected to the phone, press the 
headset key to answer and end a call.
To reject the call, press the end key, or select Options> Reject. The caller hears a 
busy tone. If you have activated the Call divert option If busy to divert calls, 
rejecting the call diverts the call.
To send a text message to the caller informing why you cannot answer the call, 
select Options> Send text message. You can activate the text message reply and 
edit the text in the message. See Reject call with SMS and Message text in “Call,” 
p. 74.
Options during a call
Many of the options that you can use during a call are network services. For 
availability, contact your service provider.
Select Options during a call for some of the following options:
Transfer—to connect a call on hold to an active call and disconnect yourself
Replace—to end an active call and replace it by answering the waiting call
Send DTMF—to send DTMF tone strings (for example, a password). Enter the DTMF 
string or search for it in Contacts. To enter a wait character (w) or a pause 
character (p), press * repeatedly. To send the tone, selectOK.
Tip: You can add DTMF tones to the DTMF field in a contact card.
Call waiting
To activate the Call waiting function (network service), select Menu> Settings> 
Phone sett.> Phone> Call> Call waiting> Activate.
During a call, to answer the waiting call, press the call key. The first call is put on 
hold. To end the active call, press the end key.
To switch between the two calls, select Swap.
■Make a video call
When you make a video call, you can see a real-time, two-way video between you 
and the recipient of the call. The live video image or video image captured by the 
camera in your device is shown to the video call recipient. 
						

							25
To be able to make a video call, you may need to have a USIM card and be in the 
coverage of a UMTS network. For availability of and subscription to video call 
services, contact your service provider. A video call can only be made between two 
parties. The video call can be made to a compatible mobile phone or an ISDN 
client. Video calls cannot be made while there is another voice, video, or data call 
active.
You are not receiving video (the recipient is not sending video or the network 
is not transmitting it).
You have denied video sending from your device.
1. Enter the phone number in the standby mode; or select Menu> Contacts, and 
scroll to the desired contact.
2. Select Options> Call> Video call.
Starting a video call may take a while. Waiting for video image is shown. If the 
call is not successful (for example, video calls are not supported by the 
network, or the receiving device is not compatible), you are asked if you want 
to try a normal call or send a message instead.
The video call is active when you see two video images, and hear the sound 
through the loudspeaker. The call recipient may deny video sending, in which 
case you hear the sound and may see a still image or a grey background 
graphic. 
To increase or decrease the volume during a call, press the volume keys.
To change between showing video or only hearing sound, select Enable or 
Disable> Sending video, Sending audio, or Sending aud. & video.
To zoom your own image, select Zoom in or Zoom out. The zoom indicator is 
shown on the top of the display.
To switch the places of the sent and received video images on the display, 
select Change image order.
Even if you have denied video sending during a video call, the call will still be 
charged as a video call. Check the pricing with your network operator or 
service provider.
3. To end the video call, press the end key.
■Answer or reject a video call
When a video call arrives,  is displayed. 
						

							26
Press the call key to answer the video call. Allow video image to be sent to caller? is 
shown. If you select Yes, the image captured by the camera in your device is 
shown to the caller. If you select No, or do nothing, video sending is not activated, 
and a grey screen is shown in place of the video.
Even if you have denied video sending during a video call, the call is still charged 
as a video call. Check the pricing with your service provider.
To end the video call, press the end key.
To reject the video call, press the end key, or select Options> Reject. To send a 
text message to the caller informing why you cannot answer the call, select 
Options> Send text message, for information on the settings, see “Phone,” p. 74.
■Share video
Use Video sharing to send live video from your mobile device to another 
compatible mobile device during a voice call.
Video sharing requirements
Because Video sharing requires a 3G universal mobile telecommunications system 
(UMTS) connection, your ability to use Video sharing depends on 3G network 
availability. Contact your service provider for questions about network availability 
and fees associated with this application. To use Video sharing you must do the 
following:
 Ensure that your device is set up for person-to-person connections.
 Ensure you have an active UMTS connection and are within UMTS network 
coverage. If you start the sharing session while you are within UMTS network 
coverage and a handover to GSM occurs, the sharing session is discontinued, 
but your voice call continues.
 Ensure that both the sender and recipient are registered to the UMTS network. 
If you invite someone to a sharing session and that person’s phone is turned 
off, or the person is not within UMTS network coverage, they do not know that 
you are sending an invitation. However, you receive an error message that the 
recipient cannot accept the invitation. 
						

							27
Settings
A person-to-person connection is also known as a session initiation protocol (SIP) 
connection. The SIP profile settings must be configured in your device before you 
can use Video sharing.
Ask your service provider for the SIP profile settings, and save them in your device. 
Your service provider may send you the settings over the air.
If you know a recipient’s SIP address, you can enter it on your contact card for that 
person. Select Menu> Contacts, a contact, and Options> Edit> Options> Add 
detail> SIP or Share view. Enter the SIP address in the format 
sip:username@domainname (you can use an IP address instead of a domain 
name). 
Share live video
To receive a sharing session, the recipient must install Video sharing and configure 
the required settings on their mobile device. You and the recipient must both be 
registered to the service before you can start sharing.
To receive share invitations, you must be registered to the service, have an active 
UMTS connection, and be within the UMTS network coverage.
1. When a voice call is active, select Options> Share video> Live video.
2. The phone sends the invitation to the SIP address you have added to the 
contact card of the recipient.
If the recipient has several SIP addresses in the contact card, select the SIP 
address to which you want to send the invitation, and Select to send the 
invitation.
If the SIP address of the recipient is not available, enter a SIP address. Select 
OK to send the invitation.
3. Sharing begins automatically when the recipient accepts the invitation.
The loudspeaker is active. You can also use a headset to continue your voice 
call while you share live video.
4. Select Pause to pause the sharing session. Select Continue to resume sharing.
5. To end the sharing session, select Stop. To end the voice call, press the end key. 
						

							28
Accept an invitation
When someone sends you a share invitation, an invitation message is displayed 
showing the sender’s name or SIP address. If your device is not set to Silent, it 
rings when you receive an invitation.
If someone sends you a share invitation and you are not within UMTS network 
coverage, you will not know that you received an invitation.
When you receive an invitation, select from the following:
Accept—to begin the sharing session and activate the view mode.
Reject—to decline the invitation. The sender receives a message that you rejected 
the invitation. You can also press the end key to decline the sharing session and 
disconnect the voice call.
To end the sharing session, select Stop.
■Log
In the log, you can monitor phone calls, text messages, packet data connections, 
and fax and data calls registered by the phone.
Connections to your remote mailbox, multimedia messaging center, or browser 
pages are shown as data calls or packet data connections in the general 
communications log.
Note: The actual invoice for calls and services from your service provider may vary, 
depending on network features, rounding off for billing, taxes, and so forth.
Note: Some timers, including the life timer, may be reset during service or software 
upgrades.
Recent calls
The phone registers the phone numbers of missed, received, and dialed calls, and 
the approximate duration of your calls. The phone registers missed and received 
calls only if the network supports these functions, and the phone is switched on 
and within the network service area.
To view recent calls (network service), select Menu> Log> Recent calls and a call 
type. In the standby mode, you can use the call key as a shortcut to the Recent 
calls log.
To clear all recent call lists in the Recent calls view, select Options> Clear recent 
calls. To clear only one of the call registers, open the register you want to erase, 
and select Options> Clear list. 
						

							29
General log
To view the general log, select Menu> Log, and scroll right.
To filter the log, select Options> Filter and the filter type.
To erase all the log contents permanently, select Options> Clear log> Yes.
4. Text input
When you write text,  appears on the top right of the display, indicating 
predictive text input, or   appears, indicating traditional text input. To set the 
predictive text input on or off when writing text, press# repeatedly until the 
desired mode is active.
,  , or   is displayed next to the text input indicator, indicating 
the character case. To change the character case, press#.
 indicates the number mode. To change between letter and number mode, 
press# repeatedly until number mode is active; or press*, and select Number 
mode or Alpha mode.
■Traditional text input
Press a number key, 1 to 9, repeatedly until the desired character appears. Not all 
characters available under a number key are printed on the key. The availability of 
characters depends on the selected writing language. See Writing language in 
“Language,” p. 70.
If the next letter you want is on the same key as the present one, wait until the 
cursor appears (or scroll forward to end the time-out period), and enter the letter.
To insert a number, press and hold the number key.
The most common punctuation marks and special characters are available under 
the 1key. For more characters, press and hold*.
To erase a character, press the clear key. To erase more characters, press and hold 
the clear key.
To insert a space, press 0. To move the cursor to the next line, press 0 three times. 
						

							30
■Predictive text input
To enter any letter with a single keypress, use predictive text input. To select the 
predictive text input, press *, and select Activate predictive text. This activates 
predictive text input for all editors in the phone.
1. To write the desired word, press the keys 2–9. Press each key only once for one 
letter. The word changes after every keypress.
For the most common punctuation marks, press 1. For more punctuation marks 
and special characters, press and hold *.
To erase a character, press the clear key. To erase more characters, press and 
hold the clear key.
2. When you have finished the word and it is correct, to confirm it, scroll forward 
or insert a space.
If the word is not correct, to view the matching words the dictionary has found 
one by one, press * repeatedly.
If the ? character is shown after the word, the word you intended to write is 
not in the dictionary. To add a word to the dictionary, select Spell. Enter the 
word (up to 32 letters) using traditional text input, and select OK. The word is 
added to the dictionary. When the dictionary becomes full, a new word 
replaces the oldest added word.
Write compound words
Write the first half of a compound word, and scroll forward to confirm it. Write 
the last part of the compound word, and to complete the compound word, press 0 
to add a space.
■Copy and delete text
1. To select letters and words, press and hold#, and at the same time scroll left or 
right. As the selection moves, text is highlighted. To select lines of text, press 
and hold #, and at the same time scroll up or down. 
2. To copy the text to the clipboard, press and hold#, and at the same time select 
Copy.
If you want to delete the selected text from the document, press the clear key.
3. To insert the text, scroll to the insertion point, press and hold#, and at the 
same time select Paste.