Home > Nitsuko > Communications System > Nitsuko Digital System Phone Program Record Form Manual

Nitsuko Digital System Phone Program Record Form Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Nitsuko Digital System Phone Program Record Form Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 57 Nitsuko manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Program 15 - Programming Access Level
    Extension
     Program
     Access Level
    Extension
     Program
     Access Level
    Extension
     Program
     Access Level
    300 324 348
    301 325 349
    302 326 350
    303 327 351
    304 328 352
    305 329 353
    306 330 354
    307 331 355
    308 332 356
    309 333 357
    310 334 358
    311 335 359
    312 336 360
    313 337 361
    314 338 362
    315 339 363
    316 340 364
    317 341 365
    318 342 366
    319 343 367
    320 344 368
    321 345 369
    322 346 370
    323 347 371
    Contd next page
    Page 22 
    						
    							Program 15 - Programming Access Level (contd)
    To enter Program 15 data:
    1. Enter program mode.
    # + dial 775312 + #.
    2. Press key 15.
    3. Dial extension + #.
    4. To accept the displayed data: #.
    OR
        To change the displayed data: Dial data + #.
    - To erase data before pressing #: Press *.
    5. Repeat steps 3-4 for all extensions.
    6. Select an option:
    - To exit Program 15: SAVE.
    - To enter another program after exiting: Press its key.
    - To exit program mode: SAVE twice.
    Page 23 
    						
    							Program 16 - Line and Line Group Access
    Extension Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Group 90 Access
     Group 91 Access
     Group 92 Access
     Group 93 Access
     Group 94 Access
     Group 95 Access
    300
    301
    302
    303
    304
    305
    306
    307
    308
    309
    310
    311
    312
    313
    314
    315
    316
    317
    318
    319
    320
    321
    322
    323
    324
    325
    326
    327
    328
    329
    330
    Contd next page
    Page 24 
    						
    							Program 16 - Line and Line Group Access (contd)
    Extension Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Group 90 Access
     Group 91 Access
     Group 92 Access
     Group 93 Access
     Group 94 Access
     Group 95 Access
    331
    332
    333
    334
    335
    336
    337
    338
    339
    340
    341
    342
    343
    344
    345
    346
    347
    348
    349
    350
    351
    352
    353
    354
    355
    356
    357
    358
    359
    360
    361
    Contd next page
    Page 25 
    						
    							Program 16 - Line and Line Group Access (contd)
    Extension Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Line ____ Access
     Group 90 Access
     Group 91 Access
     Group 92 Access
     Group 93 Access
     Group 94 Access
     Group 95 Access
    362
    363
    364
    365
    366
    367
    368
    369
    370
    371
    To enter Program 16 data:
    1. Enter program mode.
    # + dial 775312 + #.
    2. Press key 16.
    3. Dial extension + #.
    - To erase data before pressing #: Press *.
    4. Dial L for line or G for group data.
    5. Dial Line or Group number + #.
    6. To accept the displayed data: #,
    OR
        To change the displayed data: Dial data + #.
    7. Repeat steps 5-6 for all lines/groups.
    8. Press SAVE.
    9. Select an option:
    - To enter line or group data for same extension: Go to step 4.
    - To enter data for another extension: SAVE + dial Y + go to step 3.
    - To exit Program 16: SAVE twice.
    - To enter another program after exiting: Press its key.
    - To exit program mode: SAVE three times.
    Page 26 
    						
    							Program 17 - Key Assignments
    Before you fill in data, either use the Copy and Paste commands to make additional copies of the blank Key
    Assignment forms for each installed Multibutton phone and DSS Console or print copies of the forms required.
    There is a form for the phone and the console.  Make sure you copy the correct one.
    Extension 
    NumberKeyset Phone
    (Dial pad located here)
    HOLD CONF MIC/DND ICM MSG HF
    Contd next page
    Page 27 
    						
    							Program 17 - Key Assignments (contd)
    Extension 
    NumberDSS Console
    Contd next page
    Page 28 
    						
    							Program 17 - Key Assignments (contd)
    To enter Program 17 data:
    1. Enter program mode.
    - # + dial 775312 + #.
    - If you are programming assignments for a DSS Console, you must program from the 
      phone assigned to the console.
    2. Press key 17 (HOLD).
    You see DEST ICM NO: (i.e., destination extension).
    3. Dial extension (XXX) to be programmed + #.
    You see SOURCE: (i.e., source extension). If you are programming assignments for 
    your DSS Console, enter your entension number.
    4. To program the keys at extension XXX: Dial extension (XXX) again + #.
    OR
        To copy keys from extension YYY to XXX: Dial YYY + # + go to step 8 if you
        do not need to change individual keys after you copy; otherwise, go to step 5.
    - This procedure does not copy Speed Dial (stored) numbers, Ring Assign. (Program 18 [II]), 
       or Line Access (Program 16).
    - If you are programming assignments for your DSS Console, enter your entension number.
    5. Press key you wish to program.
    - For DSS Consoles, press DSS Console key.
    6. To accept the displayed data: #.
    OR
        To change the displayed data:  Dial key data + #.
    Remember:  To dial Z, dial 0 (zero).
    7.  Repeat steps 5-6 for other keys.
    8.  Press SAVE and select an option:
    - To program another extension:  Dial Y + go to step 3.
    - To exit Program 17:  SAVE.
    - To enter another program after exiting:  Press its key.
    - To exit program mode:  SAVE twice.
    Page 29 
    						
    							Program 18 - Extension Features (Part I)
    Extension DND (Do Not Disturb)
     COS (Class of Service)
     RG
     (Ring Group)
     CPG
     (Call Pickup Group)
     PRG
     (Privacy Release Group)
     OHR (Off-Hook Ring)
     BLF (DSS/BLF Lamps)
     LDU (Line Dial-Up)
     PZ
     (Page Zone Member)
     SO
     (Station Operator)
     SDB
     (Speed Dial Block)
     VX (Voice Mail)
     DS (Data set)
     DB (Door Box) - Alert 1
     DB (Door Box) - Alert 2
     DB (Door Box) - Alert 3
     DB (Door Box) - Alert 4
    300
    301
    302
    303
    304
    305
    306
    307
    308
    309
    310
    311
    312
    313
    314
    315
    316
    317
    318
    319
    320
    321
    322
    323
    324
    325
    326
    327
    328
    329
    330
    Contd next page
    Page 30 
    						
    							Program 18 - Extension Features (Part I) (contd)
    Extension DND (Do Not Disturb)
     COS (Class of Service)
     RG
     (Ring Group)
     CPG
     (Call Pickup Group)
     PRG
     (Privacy Release Group)
     OHR (Off-Hook Ring)
     BLF (DSS/BLF Lamps)
     LDU (Line Dial-Up)
     PZ
     (Page Zone Member)
     SO
    (Station Operator)
     SDB
     (Speed Dial Block)
     VX (Voice Mail)
     DS (Data set)
     DB (Door Box) - Alert 1
     DB (Door Box) - Alert 2
     DB (Door Box) - Alert 3
     DB (Door Box) - Alert 4
    331
    332
    333
    334
    335
    336
    337
    338
    339
    340
    341
    342
    343
    344
    345
    346
    347
    348
    349
    350
    351
    352
    353
    354
    355
    356
    357
    358
    359
    360
    361
    Contd next page
    Page 31 
    						
    All Nitsuko manuals Comments (0)

    Related Manuals for Nitsuko Digital System Phone Program Record Form Manual