Nikon D7000 User Manual

241
U
3Acquire dust off reference data.
Press the shutter-release button the rest of the way down to acquire Image Dust 
Off reference data.
 The monitor turns off when the shutter-release button is 
pressed.
 Note that noise reduction will be perf ormed if the subject is poorly lit, 
increasing recording times.
If the reference object is too bright or too dark, the camera 
may be unable to acquire Image Dust Off reference data 
and the message shown at right will be displayed.
 Choose 
another...

242
U
View information on the battery currently inserted in the 
camera.
Battery InfoG  button ➜BSetup menu
ItemDescription
Bat. meter The current battery level expressed as a percentage.
Pic. meter The number of times the shutter has been released with the current battery 
since the battery was last charged.
 Note that the camera may sometimes 
release the shutter without recording a photograph, for example when 
measuring preset white balance.
Battery age A five-level display showing battery age.
 0...

243
U
Add copyright information to new photographs as they are taken. Copyright 
information is visible on the fourth shoo ting data page in the photo information 
display ( 0169) and can be viewed as metadata  in ViewNX 2 (supplied) or in 
Capture NX 2 (available separately; 0281).
• Done : Save changes and return to the setup menu.
• Artist : Enter a photographer name  as described on page 137.
 Photographer 
names can be up to 36 characters long.
• Copyright : Enter the name of the copyright holder...

244
U
Select Save settings  to save the following settings to the memory card in Slot 1 (if 
the memory card is full, an error will be displayed;  0306).
Settings saved using this model of camera can be restored by selecting  Load 
settings .
 Note that  Save/load settings  is only available when a memory card is 
inserted in the ca mera, and that the  Load settings option is only available if the card 
contains saved settings.
Save/Load SettingsG  button ➜BSetup menu
MenuOption
Playback Display mode...

245
U
Display a virtual horizon based on information from the camera 
tilt sensor.
 The reference line is displayed in green when the 
camera is level.
Virtual HorizonG  button ➜BSetup menu
DTilting the Camera
The virtual horizon display is not ac curate when the camera is tilted 
at a sharp angle forward or back. If the camera is unable to measure 
tilt, the amount of tilt will not be displayed.
AViewfinder Virtual Horizon
If  Viewfinder virtual horizon  is assigned to the Fn or depth-of-field 
preview...

246
U
Fine-tune focus for up to 12 lens types. AF tuning is not recommended in most 
situations and may interfere with normal focus; use only when required. 
AF Fine TuneG button ➜BSetup menu
OptionDescription
AF fine tune  (On/Off ) •
On : Turn AF tuning on.
• Off : Turn AF tuning off.
Saved value Tune AF for the current lens (CPU lenses only). 
Press 
1 or  3 to choose a value between +20 and 
–20. Values for up to 12 lens types can be stored. 
Only one value can be stored for each type of lens....

247
U
This option is displayed only when an Eye-Fi memory card (available separately from 
third-party suppliers) is inserted in the camera.
 Choose Enable to upload 
photographs to a preselected destination.
 Note that pictures will not be uploaded if 
signal strength is insufficient.
Observe all local laws concerning wireless devices and choose  Disable where 
wireless devices are prohibited.
When an Eye-Fi card is inserted, it s status is indicated by an icon 
in the information display:
• d: Eye-Fi...

248
U
NThe Retouch Menu: 
Creating Retouched Copies
To display the retouch menu, press  G and select the  N (retouch menu) tab.
The options in the retouch menu are used to create trimmed or retouched copies of 
existing pictures.
 The retouch menu is only displayed when a memory card 
containing photographs is inserted in the camera.
1 Can only be selected by pressing  G and selecting  N tab.
2Only available if  J is pressed in full-frame playback when a retouched image or original is 
displayed.
G...

249
U
Creating Retouched Copies
To  c r e a t e  a  r e t o u c h e d  c o p y :
1Display retouch options.
Highlight the desired item in the retouch menu 
and press 2.
2Select a picture.
Highlight a picture and press  J (to view the 
highlighted picture full screen, press and hold the 
X  button; to view images in other locations as 
described on page 164, hold  D and press  1).
3Select retouch options.
For more information, see the section for the 
selected item.
 To exit without creating a 
retouched...

250
U
ACreating Retouched Copies During Playback
Retouched copies can also be created during playback.
22
Display picture full frame and  press J. Highlight an option and 
pressJ. Create retouched copy.