Nikon D7000 User Manual

251
U
D-lighting brightens shadows, making it ideal for dark or backlit photographs.
Press 1 or  3 to choose the amount of correction performed.
 
The effect can be previewed in the edit display. Press  J to copy 
the photograph.
This option is used to correct “red-eye” caused by the flash, and 
is available only with photographs taken using the flash.
 The 
photograph selected for red-eye correction is previewed as 
shown at right.
 Confirm the effects of red-eye correction and 
create a copy as...

252
U
Create a cropped copy of the selected photograph. The 
selected photograph is displayed with the selected crop shown 
in yellow; create a cropped copy as described in the following 
table.
Tr imG  button ➜Nretouch menu
ToUseDescription
Reduce size of crop
WPress the  W button to reduce the size of the crop.
Increase size of crop
XPress the  X button to increase the size of the crop.
Change crop aspect ratio Rotate the main command dial to switch between aspect 
ratios of 3 : 2, 4 : 3, 5 : 4, 1 :...

253
U
Copy photographs in Black-and-white, Sepia , or 
Cyanotype  (blue and white monochrome).
Selecting  Sepia or Cyanotype  displays a preview of 
the selected image; press  1 to increase color 
saturation,  3 to decrease.
 Press  J to create a 
monochrome copy.
MonochromeG  button ➜Nretouch menu
Increase 
saturation
Decrease 
saturation 

254
U
Choose from the following filter effects. After adjusting filter effects as described 
below, press  J to copy the photograph.
Filter EffectsG  button ➜Nretouch menu
OptionDescription
Skylight Creates the effect of a skylight filter, making the 
picture less blue.
 The effect can be previewed in the 
monitor as shown at right.
Warm filter Creates a copy with warm tone filter effects, giving the 
copy a “warm” red cast.
 The effect can be previewed in 
the monitor.
Red intensifier Intensify reds (...

255
U
Use the multi selector to create a copy with modified color 
balance as shown below.
 The effect is displayed in the monitor 
together with red, green, and blue histograms ( 0167) giving 
the distribution of tones in the copy.
Color BalanceG  button ➜Nretouch menu
Increase amount of green
Increase amount of blue Create retouched copy
Increase amount of amber
Increase amount of magenta
AZoom
To zoom in on the image displayed in the monitor, press the  X button.
 
The histogram will be updated to...

256
U
Image overlay combines two existing NEF (RAW ) photographs to create a single 
picture that is saved separately from the originals; the results, which make use of RAW 
data from the camera image sensor, are notice ably better than overlays created in an 
imaging application.
 The new picture is saved at current image quality and size 
settings; before creating an over lay, set image quality and size (085, 88; all options 
are available).
 To create a NEF (RAW ) copy, choose an image quality of...

257
U
4Adjust gain.
Highlight Image 1 or Image 2  and optimize 
exposure for the overlay by pressing  1 or  3 to 
select gain from values between 0.1 and 2.0.
 
Repeat for the second image. The default value is 
1.0; select 0.5 to halve gain or 2.0 to double it.
 The 
effects are visible in the  Preview column.
5Preview the overlay.
Press 4 or  2 to place the cursor in the  Preview 
column and press  1 or  3 to highlight  Overlay. 
Press  J to preview the overlay as shown at right 
(to save the overlay...

258
U
Create JPEG copies of NEF (RAW ) photographs.
1Select NEF (RAW) processing .
Highlight NEF (RAW) processing  in the retouch 
menu and press  2 to display a picture selection 
dialog listing only NEF (RAW ) images created with 
this camera.
2Select a photograph.
Highlight a photograph (to view the highlighted 
photograph full frame, press and hold the  X 
button; to view images in other locations as 
described on page 164, hold  D and press  1).
 
Press  J to select the highlighted photograph....

259
U
Create small copies of selected photographs.
1Select Resize.
To resize selected images, press  G to display 
the menus and select  Resize in the retouch 
menu.
2Choose a destination.
If two memory cards are  inserted, you can choose 
a destination for the resized copies by 
highlighting  Choose destination  and pressing 2 
(if only one card is inserted, proceed to Step 3).
The menu shown at right will be displayed; 
highlight a card slot and press  J.
3Choose a size.
Highlight  Choose size  and...

260
U
4Choose pictures.
Highlight Select image  and press 2.
The dialog shown at right will be displayed; 
highlight pictures using the multi selector and 
press the  W button to select or deselect (to view 
the highlighted picture full screen, press and hold 
the  X button; to view images in other locations as 
described on page 164, hold  D and press  1).
 
Selected pictures are marked by a  8 icon. Press 
J  when the selection is complete.
5Save the resized copies.
A confirmation dialog will be...