Nikon D7000 User Manual

191
Q
Viewing Photographs on TV
The supplied EG-D2 audio video (A/V ) cable can be used to connect the camera to a 
television or video recorder for playback or recording.
 A type C mini-pin High-
D efinition  Multimedia  Interface (HDMI) cable (available separately from third-party 
suppliers) can be used to connect the  camera to high-definition video devices.
Standard Definition Devices
Before connecting the camera to a standa rd television, confirm that the camera 
video standard ( 0237) matches...

192
Q
AVideo Mode
If no image is displayed, check that camera is correctly connected and that the option 
selected for  Video mode  (0 237) matches the video standard used in the TV.
ATelevision Playback
Use of an EH-5a AC adapter and EP-5B power connector (available separately) is 
recommended for extended playback.
ASlide Shows
The  Slide show  option in the playback menu can be used for automated playback ( 0201).
AAudio
When a movie with sound recorded in stereo using an external microphone is...

193
Q
High-Definition Devices
The camera can be connected to HDMI devices using a type C mini-pin HDMI cable 
(available separately from third-party suppliers).
1Tu rn  t he  came ra o ff.
Always turn the camera off before connecting or disconnecting an HDMI cable.
2Connect the HDMI cable as shown.
3Tune the device to the HDMI channel.
4Turn the camera on and press the  K button.
During playback, images will be displa yed on the high-definition television or 
monitor screen; the camera monitor will...

194
Q
❚❚HDMI Options
The  HDMI  option in the setup menu controls ou tput resolution and can be used to 
enable the camera for remote control from devices that support HDMI-CEC ( High-
D efinition  Multimedia  Interface– Consumer  Electronics  Control, a standard that 
allows HDMI devices to be used to control peripherals to which they are connected).
Output Resolution
Choose the format for images output to the HDMI device.
 
If  Auto  is selected, the camera will automatically select 
the appropriate...

195
M
U
Menu Guide
To display the playback menu, press G and select the  D (playback menu) tab.
The playback menu contains the following options:
Choose a folder for playback ( 0163):
D The Playback Menu:  Managing Images
G button
Option0
Delete 176
Playback folder 195
Hide image 196
Display mode 197
Copy image(s) 197
Image review200
After delete 200
Rotate tall 200
Slide show 201
Print set (DPOF) 189
Option0
Playback FolderG button ➜Dplayback menu
OptionDescription
D7000 Pictures in all folders created...

196
U
H ide or reveal pic tures. Hidden pictures are visible only in the Hide image menu and 
can only be deleted by fo rmatting the memory card.
Follow the steps below to hide or reveal selected pictures.
1Choose  Select/set .
Highlight Select/set  and press 2.
2Select pictures.
Use the multi selector to scroll through the 
pictures on the memory card (to view the 
highlighted picture full screen, press and 
hold the  X button; to view images in other 
locations as described on page 164, hold 
D  and...

197
U
Choose the information available in the playback photo 
information display ( 0165).
 Press  1 or  3 to highlight an 
option, then press  2 to select the option for the photo 
information display.
 A L appears next to selected items; to 
deselect, highlight and press  2.
 To return to the playback 
menu, highlight  Done and press  J.
Copy images between memory cards.
 This option is only available when two 
memory cards are inserted in the camera.
To  c o p y  i m a g e s :
1Choose  Select source...

198
U
4Select the source folder.
Highlight the folder containing the images 
to be copied and press 2.
5Make the initial selection.
Before going on select or deselect individual 
images, you can mark all or all protected 
images in the folder fo r copying by choosing 
Select all images  or Select protected 
images .
 To mark only individually selected 
images for copying, choose  Deselect all 
before proceeding.
6Select additional images.
Highlight pictures and press  W to select or 
deselect (to view...

199
U
8Select a destination folder.
To enter a folder number, choose Select 
folder by number , enter the number 
( 0 203), and press  J.
 If the folder with the 
selected number does not already exist, a 
new folder will be created.
To choose from a list of existing folders, 
choose  Select folder from list , highlight a 
folder, and press  J.
9Copy the images.
Highlight  Copy image(s)?  and press J.
A confirmation dialog will be displayed; 
highlight  Ye s and press  J.
 Press  J again to 
exit when...

200
U
Choose whether pictures are automatically displayed in the 
monitor immediately after shooting.
 If Off  is selected, pictures 
can only be displayed by pressing the  K button.
Choose the picture displayed after an image is deleted.
Choose whether to rotate “tall” (portrait-orientation) pictures 
for display during playback.
 Note that because  the camera itself 
is already in the appropriate orientation during shooting, 
images are not rotated automatically during image review.
Image ReviewG...