Nikon Coolpix S8200 Users Manual

E29
Connecting the Camera to a Printer (Direct Print)
Reference Section
5Printing begins.
•Monitor display returns to the screen shown in step 2 
when printing is complete.
•To cancel printing before all copies have been printed, 
press the k button.
DPOF printing
Print images for which a print order was created 
using the Print order option (E43).
•When the screen shown on the right is 
displayed, select Start print and press the k 
button to start printing. Select Cancel and 
press the k button to...

E30
Reference Section
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
•See “Changing the Image Size (Image Mode)” (A71) for information about 
Image mode.
•Other than the Continuous (E35), items share the same settings with A 
(auto) mode and continuous shooting mode, and the settings are saved in the 
camera’s memory even if the camera is turned off.
•Continuous can be selected only when using continuous shooting mode.
White Balance (Adjusting Hue)
The color of light reflected from an...

E31
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
BNotes About White Balance
•When hue is adjusted using the creative slider (A67), this feature cannot be set.
•Some settings cannot be used with other functions (A73).
•At white-balance settings other than Auto or Flash, turn the flash off (W) (A56).
Downloaded From camera-usermanual.com Nikon Manuals 

E32
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
Using Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with a 
strong color cast when the desired effect has not been achieved with white balance 
settings like Auto and Incandescent (for example, to make images shot under a 
lamp with a red shade look as though they had been shot under white light).
Use the procedure below to measure the white balance value under the lighting...

E33
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
Metering
The process of measuring the brightness of the subject to determine exposure is 
known as metering.
Select how the camera meters exposure.
Enter A (auto) mode or continuous shooting mode M d button M A or C tab M 
Metering
OptionDescription
GMatrix 
(default setting)Uses a wide area of the screen for metering. This metering mode 
provides the appropriate exposure for a variety of shooting 
conditions....

E34
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
ISO Sensitivity
When ISO sensitivity is increased, less light is needed when taking pictures.
Higher ISO sensitivity allows darker subjects to be captured. Additionally, even 
with subjects of similar brightness, pictures can be taken at faster shutter speeds, 
and blurring caused by camera shake and subject movement can be reduced.
•Although higher ISO sensitivity is effective when shooting darker subjects, when...

E35
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
Continuous Shooting
Select the desired continuous shooting option (only when using continuous 
shooting mode).
Enter shooting mode M d button M C tab M Continuous
OptionDescription
VContinuous 
(default setting)While the shutter-release button is held all the way down, 
images are captured continuously at a rate of about 6 fps 
(when image mode is set to P 4608×3456). Shooting ends 
when the shutter-release button is...

E36
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
The current continuous shooting setting is indicated by an icon when shooting 
(A6).
WMulti-shot 16Each time the shutter-release button is 
pressed, the camera takes 16 shots at a 
rate of about 30 fps and arranges them 
in a single image.
•Image mode is fixed at L(image 
size: 2560 × 1920 pixels).
•Digital zoom cannot be used.
OptionDescription
CPre-shooting Cache
When Pre-shooting cache is selected, shooting begins...

E37
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
AF Area Mode
Use this option to determine how the camera selects the focus area for autofocus.
Enter A (auto) mode or continuous shooting mode M d button M A or C tab M 
AF area mode
OptionDescription
aFace priorityWhen the camera detects a human 
face, it focuses on that face. See 
“Using Face Detection” (A76) for 
more information. If more than one 
face is detected, the camera focuses 
on the face closest to the...

E38
The Shooting Menu (for A (Auto) Mode, Continuous Shooting Mode)
Reference Section
xManualSelect one of 99 focus areas in the 
monitor. This option is suited to 
situations in which the intended 
subject is relatively still and not 
positioned in the center of the 
frame.
Rotate the multi selector or press H, 
I, J, or K to move the focus area 
to where the subject is, and take a 
picture.
•To change settings for any of the 
following functions, first press the 
k button to cancel focus-area...