Nikon Coolpix S8200 Users Manual

95
The Setup Menu
General Camera Setup
Motion detectionWhen set to Auto (default setting), if the camera detects 
camera shake or subject movement at the time of 
shooting, it automatically increases ISO sensitivity and 
shutter speed to reduce blurring. The r indicator glows 
green when the camera detects camera shake and 
increases shutter speed.
•When using certain shooting modes or settings, 
motion is not detected. In these case the r indicator 
is not displayed.E68
AF assistWhen set to Auto...

96
The Setup Menu
General Camera Setup
Charge by computerWhen set to Auto (default setting), you can charge the 
camera’s battery by connecting the camera to a 
computer (provided that the computer is able to supply 
power).
•When charging by computer, it takes more time to 
charge the battery than when using the Charging AC 
Adapter EH-69P. Additionally, when charging by 
computer and transferring images to the computer, it 
takes more time to charge the battery.E75
Blink warningExcept when using...

E1
Reference Section
E Reference Section
The Reference Section provides detailed information and hints about using the 
camera.
Shooting
Using Easy Panorama (Shooting and Playback) ..............................................E2
Using Panorama Assist .............................................................................................E5
Playback
Playing Back and Deleting Images Captured Continuously (Sequence)......E7
Editing Still Images...

E2
Reference Section
Reference Section
Using Easy Panorama (Shooting and Playback)
Shooting With Easy Panorama
1Rotate the mode dial to 
y, press the d 
button and select 
pPanorama (A39).
2Select VEasy panorama and press the 
k button.
3Select W Normal (180°) or X Wide 
(360°) as the shooting range and press the k 
button.
•When the camera is readied in the horizontal position, 
the image size (width × height) is as follows.
-W Normal (180°): 
3200 × 560 when moved horizontally
1024 × 3200 when moved...

E3
Using Easy Panorama (Shooting and Playback)
Reference Section
5Press the shutter-release button all 
the way, and then remove your finger 
from the shutter-release button.
•I is displayed to indicate the direction of 
camera movement.
6Move the camera slowly and straight in one of 
the four directions, and begin shooting.
•When the camera detects which direction it is moving 
in, shooting begins.
•A guide indicating the current shooting position is 
displayed.
•When the shooting position guide reaches...

E4
Using Easy Panorama (Shooting and Playback)
Reference Section
Playing Back Images With Easy Panorama (Scroll Playback)
Switch to playback mode (A30), display an image 
captured using easy panorama in full-frame playback 
mode, and then press the k button to display the 
short edge of the image using the entire monitor and 
automatically move (scroll) the displayed area.
•The image scrolls in the direction that the camera 
was moved at the time of shooting.
•Rotate the multi selector to advance or...

E5
Reference Section
Using Panorama Assist
Use a tripod for the best results. Set Vibration reduction (E67) to Off in the 
setup menu when using a tripod to stabilize the camera.
1Rotate the mode dial to 
y, press the d 
button and select 
pPanorama (A39).
2Select UPanorama assist and press the 
k button.
•Panorama direction icons are displayed to show the 
direction in which images will be joined.
3Use the multi selector to select the direction 
and press the k
 button.
•Select the direction in which...

E6
Using Panorama Assist
Reference Section
5Take the next picture.
•Frame the next image so that one third of the 
frame overlaps the first image, and press the 
shutter-release button.
•Repeat this process until the necessary 
number of images has been taken to 
complete the scene.
6Press the k button when shooting is 
complete.
•The camera returns to step 3.
839839
29m 0s29m 0s
EndEndEnd
837837
29m 0s29m 0s
EndEndEnd
BNotes About Panorama Assist
•Set flash mode, self-timer, macro mode and exposure...

E7
Reference Section
Playing Back and Deleting Images Captured Continuously (Sequence)
Each series of images captured using the following settings is saved in a sequence.
Playing Back Sequences
In full-frame playback mode or thumbnail playback 
mode (A31), the first image of a sequence is used as 
the “key picture,” i.e., it is displayed to represent the 
images in the sequence.
While the key picture of a sequence is displayed in full-
frame playback mode, press the k button to display 
each image in the...

E8
Playing Back and Deleting Images Captured Continuously (Sequence)
Reference Section
CHow Sequences Are Displayed on the Playback Screen
When using thumbnail playback mode, images are displayed as shown below.
When Sequence display options (E54) in the playback menu is set to Individual pictures, if 
you select images in a sequence when using full-frame playback mode or thumbnail playback 
mode, the F icon is displayed.
CSequence Display Options
Select Sequence display options (E54) in the playback...