Nikon Coolpix S8200 Users Manual

E59
The Movie Menu
Reference Section
Autofocus Mode
Select the autofocus method used wh en recording normal speed movies.
Enter shooting mode M d  button  M D  tab  M Autofocus mode
OptionDescription
A  Single AF 
(default setting) Focus is locked when the 
b(e movie-record) button is 
pressed to start recording.
Select this option when the di stance between the camera and 
the subject will remain fairly consistent.
B  Full-time AF Camera focuses continuously.
Select this option when the di
stance...

E60
Reference Section
The Setup Menu
Welcome Screen
Select whether or not a welcome screen is displayed when the camera is turned 
on.
d button M z tab M Welcome screen
OptionDescription
None (default setting)The camera enters shooting or playback mode without 
displaying the welcome screen.
COOLPIXThe camera displays a welcome screen and enters shooting or 
playback mode.
Select an imageDisplays an image selected for the welcome screen. When the 
image selection screen is displayed, select an image...

E61
The Setup Menu
Reference Section
Time Zone and Date
Set the camera clock.
Selecting the Travel Destination Time Zone
1Use the multi selector to select Time zone 
and press the k button.
•The Time zone screen is displayed.
2Select xTravel destination and press the 
k button.
•The date and time displayed in the monitor changes 
according to the region currently selected. d button M z tab M Time zone and date
OptionDescription
Date and timeSet camera clock to current date and 
time.
Use the multi...

E62
The Setup Menu
Reference Section
3Press K.
•The travel destination screen is displayed.
4Press J or K to select the travel destination 
time zone.
•If daylight saving time is in effect, press H to enable 
daylight saving time function. W is displayed at the top 
of the monitor and the camera clock is advanced one 
hour. Press I to disable the daylight saving time 
function.
•Press the k button to apply the travel destination time 
zone.
•While the travel destination time zone is selected, the 
Z icon...

E63
The Setup Menu
Reference Section
CTime Zones
The camera supports the time zones listed below.
For time zones not listed below, set the camera clock to local time from the Date and time option.
UTC +/–LocationUTC +/–Location
–11 Midway, Samoa +1 Madrid, Paris, Berlin
–10 Hawaii, Tahiti +2 Athens, Helsinki, Ankara
–9 Alaska, Anchorage +3Moscow, Nairobi, Riyadh, 
Kuwait, Manama
–8PST (PDT): Los Angeles, Seattle, 
Vancouver+4 Abu Dhabi, Dubai
–7 MST (MDT): Denver, Phoenix +5 Islamabad, Karachi
–6CST...

E64
The Setup Menu
Reference Section
Monitor Settings
Set the options below.
d button M z tab M Monitor settings
OptionDescription
Photo infoSelect information displayed in the monitor during shooting and 
playback. See “Photo Info” (E65) for more information.
BrightnessSelect from five settings for monitor brightness. The default 
setting is 3.
Downloaded From camera-usermanual.com Nikon Manuals 

E65
The Setup Menu
Reference Section
Photo Info
Select whether or not the photo information is displayed in the monitor.
See “The Monitor” (A6) for information about indicators displayed in the monitor.
Shooting modePlayback mode
Show info
Auto info
(default setting)The same information as in Show info is displayed. If no operations are 
performed after a few seconds, the display will be the same as Hide info. 
The information is displayed again when an operation is performed.
Hide info
Framing...

E66
The Setup Menu
Reference Section
Print Date (Imprinting Date and Time)
The shooting date and time can be imprinted on the 
images during shooting, allowing the information to 
be printed even from printers that do not support date 
printing (E44).
The current print date setting is indicated by an icon when shooting (A6). No 
icon is displayed when Off is selected.
d button M z tab M Print date
OptionDescription
fDateDate is imprinted on images.
SDate and timeDate and time are imprinted on images....

E67
The Setup Menu
Reference Section
Vibration Reduction
Reduce the effects of camera shake while shooting. Vibration reduction reduces 
blur, caused by slight hand movement known as camera shake, which commonly 
occurs when shooting with zoom applied or at slow shutter speeds. The effects of 
camera shake are reduced when recording movies, in addition to when taking still 
pictures.
Set Vibration reduction to Off when shooting still images while using a tripod 
to stabilize the camera.
The current...

E68
The Setup Menu
Reference Section
Motion Detection
Enable motion detection to reduce the effects of subject movement and camera 
shake when shooting still images.
The current motion detection setting is indicated by an icon when shooting 
(A6). When the camera detects camera shake or subject movement, it increases 
shutter speed and the motion detection icon turns green. No icon is displayed 
when Off is selected.
d button M z tab M Motion detection
OptionDescription
UAuto 
(default setting)When the...