Nikon Camera D810 Users Manual

57
The Live View Display: Movie Live View
ItemDescription0
q “No movie” icon
Indicates that movies can not be recorded. 49
w Headphone volume Volume of audio output to headphones.
 Displayed when third-party headphones 
are connected. 56
e Microphone 
sensitivity
Microphone sensitivity.
62
r Sound level Sound level for audio recording.
 Displayed 
in red if level is too high; adjust 
microphone sensitivity accordingly. 62
t Frequency response
The current frequency response. 63
y Wind noise reduction...

58
The Information Display: Movie Live View
To hide or display indicators in the monitor during movie live 
view, press the R button.
Information on Information off Framing guides
Virtual horizon (0 379) Histogram 

59
Image Area
Regardless of the option selected for Image area in the shooting 
menu ( 074), all movies and photographs recorded in movie live 
view ( 049) have an aspect ratio of 16 : 9.
Images recorded with  On selected for  Image area> Auto DX 
crop  (0 75) and a DX lens attached use a DX-based movie 
format, as do images recorded with  DX (24 × 16) selected for 
Image area > Choose image area . Other images use an FX-
based movie format. A  a icon is displayed when the DX-based 
movie format is...

60
Taking Photos During Movie Live View
If Ta k e  p h o t o s  is selected for Custom Setting g4 
( Assign shutter button , 0 364), photographs can be 
taken at any time during movie live view by pressing 
the shutter-release button all the way down.
 If movie 
recording is in progress, recording will end and the footage 
recorded to that point will be saved.
 The photograph will be 
recorded at the current image area setting using a crop with an 
aspect ratio of 16 : 9.
 Image quality is determined by...

61
AWireless Remote Controllers and Remote Cords
If  Record movies  is selected for Custom Setting g4 ( Assign shutter 
button , 0 364), the shutter-release bu ttons on optional wireless 
remote controllers and remote cords ( 0439) can be used to start 
movie live view and to start and end movie recording.
DRecording Movies
Flicker, banding, or distortion may be visible in the monitor and in the 
final movie under fluorescent, mercury vapor, or sodium lamps or if the 
camera is panned horizontally or an...

62
Movie Settings
Use the Movie settings  option in the shooting menu ( 0290) to 
adjust the following settings.
• Frame size/frame rate, Movie quality : Choose from the following 
options:
• Microphone sensitivity : Turn the built-in or 
optional stereo microphones ( 0441) 
on or off or adjust microphone 
sensitivity.
 Choose  Auto sensitivity  to 
adjust sensitivity automatically, 
Microphone off  to turn sound 
recording off; to select microphone 
sensitivity manually, select  Manual sensitivity, then...

63
•Frequency response : If S  Wide range  is selected, the built-in 
and optional stereo microphones ( 0441) will respond to a 
wide range of frequencies, from  music to the bustling hum of a 
city street.
 Choose  T Vocal range  to bring out human 
voices.
• Wind noise reduction : Select On to enable the low-cut filter for the 
built-in microphone (optional stereo microphones are 
unaffected), reducing noise produced by wind blowing over 
the microphone (note that other sounds may also be affected)....

64
•Movie ISO sensitivity settings : Adjust the 
following ISO sensitivity settings. - ISO sensitivity (mode M) : Choose the ISO 
sensitivity for exposure mode  h from 
values between ISO 64 and Hi 2.
 Auto 
ISO sensitivity control is used in other 
exposure modes.
- Auto ISO control (mode M) : Select On for auto ISO sensitivity 
control in exposure mode  h, Off  to use the value selected for 
ISO sensitivity (mode M) .
- Maximum sensitivity : Choose the upper limit for auto ISO 
sensitivity control from...

65
Movies are indicated by a 1 icon in full-frame playback ( 0235). 
Press the center of the multi selector to start playback; your 
current position is indicated by the movie progress bar.
The following operations can be performed:
Viewing Movies
1 icon Length Current position/total length
Movie
progress bar Volume Guide
ToUseDescription
Pause Pause playback.
Play Resume playback when movie is paused or 
during rewind/advance.
Rewind/
advance Speed increases 
with each press, 
from 2 × to 4 × to 8 × to...

66
Skip 10 sRotate the main command dial one stop to 
skip ahead or back 10 s.
Skip 
ahead/ back Rotate the sub-command dial to skip to next 
or previous index, or to skip to the last or 
first frame if the movie contains no indices.
Adjust 
volume
X/WPress  X to increase volume, 
W to decrease.
Trim movie
bSee page 67 for more information.
Exit /
KExit to full-frame playback.
Return to  shooting  mode Press the shutter-release button halfway to 
exit to shooting mode.
AThe 
p Icon
Movies with indices (...