Nikon Camera D810 Users Manual

337
9Frame the photograph, focus, and shoot.
After confirming that the camera flash-ready light and the 
flash-ready lights for all other flash units are lit, frame the 
photograph, focus, and shoot.
 FV lock ( 0198) can be used if 
desired.
AThe Flash Sync Mode Display
M  does not appear in the control panel flash sync mode display when 
– – is selected for  Built-in flash> Mode .
AFlash Compensation
The flash compensation value selected with the  M (Y ) button and 
sub-command dial is added to the fl...

338
Choose how the camera adjusts flash level when exposure 
compensation is used.
If On  is selected when the camera is used with the built-in flash 
or an optional flash unit that supports the Nikon Creative 
Lighting system ( 0428), a modeling flash will be emitted when 
the camera  Pv button is pressed ( 0117).
 No modeling flash is 
emitted if  Off is selected.
Choose the setting or settings bracketed when auto bracketing 
( 0 133) is in effect.
 Choose  AE & flash  (j ) to perform both 
exposure...

339
This option determines which settings are affected when AE & 
flash  or AE only  is selected for Custom Setting e6 in manual 
exposure mode.
Flash bracketing is performed only with i-TTL or AA flash control.
 
If a setting other than  Flash only is selected and the flash is not 
used, ISO sensitivity will be fixed at the value for the first shot, 
regardless of the setting selected for auto ISO sensitivity control 
( 0 111).
e7: Auto Bracketing (Mode M)
G  button ➜ACustom Settings menu...

340
At the default setting of MTR > under > over (H ), exposure, 
flash, and white balance bracketing are performed in the order 
described on pages 135 and 140.
 If  Under > MTR > over  (I ) is 
selected, shooting will proceed in order from the lowest to the 
highest value.
 This setting has no effect on ADL bracketing.
e8: Bracketing Order
G  button ➜ACustom Settings menu 

341
Choose what happens when the power switch is rotated to D.
This option determines the role assigned to the center of the 
multi selector during viewfinder photography, playback, and 
live view (regardless of the option selected, pressing the center 
of the multi selector when a movie is displayed full frame starts 
movie playback).
f: Controls
f1:  D Switch
G  button ➜ACustom Settings menu
OptionDescription
DLCD backlight ( D) Control panel backlight illuminates for 6 s.
hD and information 
display...

342
❚❚Shooting Mode
❚❚ Playback Mode
OptionRole assigned to center of multi selector
JSelect center 
focus point Select the center focus point.
vPreset focus 
pointPressing the center of the multi selector selects a 
preset focus point.
 To choose the point, select it 
and press the center of the multi selector while 
pressing the AF-mode button until the focus 
point flashes.
 Separate focus points can be 
selected for “wide” (lan dscape) orientation and 
for each of the two “tall” (portrait)...

343
❚❚Live View
If Restart standby timer  is selected, operating the multi 
selector when the standby timer expires ( 034) will activate the 
exposure meters and start the standby timer.
 If  Do nothing  is 
selected, the timer will not start when the multi selector is 
pressed.
Choose the role played by the  Fn button, 
either by itself ( Press) or when used in 
combination with the command dials 
( Press + command dials ).
OptionRole assigned to center of multi selector
JSelect center 
focus...

344
❚❚Press
Selecting  Press displays the following options:
OptionDescription
qPreview During viewfinder photography, you can preview 
depth of field while the 
Fn button is pressed 
( 0 117). During live view photography, you can 
press the button once to open the lens to 
maximum aperture, making  it easier to check 
focus; pressing the button again restores 
aperture to its original value ( 041).
rFV lock Press the 
Fn button to lock flash value (built-in 
flash and compatible optional flash units...

345
1Bracketing burstIf the 
Fn button is pressed while exposure, flash, or 
ADL bracketing is active in single frame or quiet 
shutter-release mode, all shots in the current 
bracketing program will be taken each time the 
shutter-release button is pressed. If white 
balance bracketing is active or continuous release 
mode (mode  U, T  or  M) is selected, the camera 
will repeat the bracketing burst while the shutter-
release button is held down.
4+ NEF (RAW) If image quality is set to 
JPEG fine, JPEG...

346
wViewfinder grid 
displayPress the 
Fn button to turn the framing grid 
display in the viewfinder on or off ( 06).
!Viewfinder 
virtual horizon Press the 
Fn button to view a virtual horizon 
display in the viewfinder ( 0347).
xDisable 
synchronized 
release Keep the 
Fn button pressed to take photographs 
with the master camera only when using a 
wireless remote controller for remote 
synchronized release.
yRemote release 
only Keep the 
Fn button pressed to take photographs 
with the remote cameras...