Nikon Camera D810 Users Manual

257
Copy Pictures to the Computer
Before proceeding, be sure you have installed the software on 
the supplied ViewNX 2 CD (0253).
1Connect the USB cable.
After turning the camera off and ensuring that a memory 
card is inserted, connect the supplied USB cable as shown 
and then turn the camera on.
Using ViewNX 2
AUse a Reliable Power Source
To ensure that data transfer is no t interrupted, be sure the camera 
battery is fully charged.
AConnecting Cables
Be sure the camera is off when connecting or...

258
2Start Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a 
program, select Nikon Transfer 2.
AThe USB Cable Clip
To prevent cable from being discon nected, attach the supplied clip 
as shown.
DUSB Hubs
Connect the camera directly to the computer; do not connect the 
cable via a USB hub or keyboard.
AWindows 7
If the following dialog is displa yed, select Nikon Transfer 2 as 
described below.
1 Under  Import pictures and videos , 
click  Change program .
 A...

259
3Click Start Transfer .
At default settings, pictures  on the memory card will be 
copied to the computer.
4Terminate the connection.
When transfer is complete, turn the camera off and 
disconnect the USB cable.
AWindows 8.1
Windows 8.1 may display an AutoPlay 
prompt when the camera is connected. 
Tap or click the dialog and then tap or 
click  Import File/Nikon Transfer 2  to 
select Nikon Transfer 2.
Start Transfer 

260
AStarting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut on the desktop.
• Mac: Click the ViewNX 2 icon in the Dock.
AFor More Information
Consult online help for more information on using ViewNX 2.
ACapture NX-D
Use Nikon’s Capture NX-D software to retouch photos or to change 
settings for NEF (RAW ) pictures and save them in other formats.
 Capture NX-D also offers an Image Dust Off feature that removes 
image artifacts caused by dust inside the camera. Capture NX-D is 
available...

261
Ethernet and Wireless Networks
The optional UT-1 communication unit (0437) can be used to 
upload photographs to a computer or ftp server.
 The camera 
connects to the UT-1 using the USB cable supplied with the 
camera, while the UT-1 in turn connects to the network via an 
Ethernet cable or an optional WT-5 wireless transmitter ( 0437).
 
The optional communication units and wireless transmitters 
support the following modes:
For information on using optional communication units or 
wireless...

262
DDuring Transfer
Movies can not be recorded or played back when the UT-1 is 
connected and there are either images remaining to be sent or images 
currently being transferred via an  Ethernet or wireless network.
AMovies
Movies can be uploaded over Ethernet and wireless networks in 
transfer mode. Note, however, that movies can not be uploaded using 
the  Auto send  or Send folder  features in the  Options menu.
DHTTP Server Mode
The camera can not be used to record or view movies in HTTP server...

263
Selected JPEG images can be printed on a PictBridge printer 
(0 485) connected directly to the camera.
Connecting the Printer
Connect the camera using the supplied USB cable. Do not use 
force or attempt to insert the connectors at an angle.
When the camera and printer are turned on, a welcome screen 
will be displayed in the monitor, followed by a PictBridge 
playback display.
Printing Photographs
DUSB Hubs
Connect the camera directly to the printer; do not connect the cable 
via a USB hub....

264
Printing Pictures One at a Time
1Display the desired picture.
Press 4 or  2 to view additional pictures.
 Press the  X button 
to zoom in on the current frame (press the center of the multi 
selector to exit zoom).
 To view thumbnails, press the center 
of the multi selector.
 Use the multi selector to highlight 
pictures, or press the center of the multi selector again to 
display the highlighted picture full frame.
 To view images in 
other locations, press  W when thumbnails are displayed and...

265
2Adjust printing options.
Press J to display the following items, then press  1 or  3 to 
highlight an item and press  2 to view options (only options 
supported by the current printer are listed; to use the default 
option, select  Printer default ).
 After selecting an option, 
press  J to return to the printer settings menu.
3Start printing.
Select  Start printing  and press J to start printing.
 To  c a n c e l  
before all copies have been printed, press  J.
OptionDescription
Page size Choose a...

266
Printing Multiple Pictures
1Display the PictBridge menu.
Press the G button in the PictBridge playback display.
2Choose an option.
Highlight one of the following options and press  2.
• Print select : Select pictures for printing.
 Use the multi 
selector to highlight pictures (to view images in other 
locations, press  W and select the desired card and folder as 
described on page 237; to disp lay the current picture full 
screen, press and hold the  X button) and, keeping the 
L (Z /Q ) button...