Nikon Camera Coolpix S7000 Reference Manual

111
Using Menus
Photo VR
Select the vibration reduction setting used when shooting still images.
Select  Off when using a tripod to stabilize the camera during shooting.
BNotes About Photo VR
•After turning on the camera or after switching from playback mode to shooting 
mode, wait for the shooting mode screen to be displayed completely before 
taking pictures.
• Images in the camera monitor may be displayed blurry immediately after shooting.
• The effects of camera shake may not be completely eliminated...

112
Using Menus
Digital Zoom
BNotes About Digital Zoom
•Digital zoom cannot be used in  the following shooting modes:
- Portrait , Night portrait , Night landscape , Backlighting  (when HDR is set), 
Easy panorama , or Pet portrait  scene mode
- Smart portrait mode
• Digital zoom cannot be used in other shooting modes when using certain settings 
(A 57).
Sound Settings
Press the  d button  M z  menu icon  M Digital zoom  M k  button
OptionDescription
On (default setting) Digital zoom is enabled.
Off...

113
Using Menus
Auto Off
Set the amount of time that elapses before the camera enters standby mode 
( A 14).
You can select  30 s, 1 min  (default setting),  5 min, or 30 min .
CSetting the Auto Off Function
The time that passes before the camera enters standby mode is fixed in the following 
situations:
•When a menu is displayed: 3 mi nutes (when auto off is set to 30 s or 1 min )
• When shooting using  Pet portrait auto release : 5 minutes (when auto off is set 
to  30 s  or 1 min )
• When shooting...

114
Using Menus
Format Card/Format Memory
Use this option to format a memory card or the internal memory.
Formatting the memory cards or internal memory permanently deletes 
all data. Data that has been deleted cannot be recovered. Make sure to 
save important images to a computer before formatting.
Formatting a Memory Card
• Insert a memory card into the camera.
• Select  Format card  in the setup menu and then press the k  button.
Formatting the Internal Memory
•Remove the memory card from the camera....

115
Using Menus
Charge by Computer
BNotes About Charging with a Computer
•When connected to a computer, the camera  turns on and starts charging. If the 
camera is turned off, charging stops.
• About 3 hours are required  to charge a fully exhausted battery. Charging time 
increases when images are transferred while the battery is charging.
• The camera turns off automatically if  there is no communication with the 
computer for 30 minutes after the battery has finished charging.
BWhen the Charge Lamp...

116
Using Menus
Reset All
When Reset is selected, the camera’s settings are restored to their default 
values.
• Some settings, such as  Time zone and date or Language , are not reset.
• The wireless connection is terminated if  this option is performed while Wi-Fi 
is connected.
CResetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in 
the internal memory ( A17) before selecting  Reset all.
Conformity Marking
View some of the conformity marki ngs that...

117
Using the Wi-Fi (Wireless LAN) Function
Using the Wi-Fi (Wireless LAN) 
Function
You can perform the following functions if you install the dedicated software 
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, 
and connect it to the camera.
Take Photos
You can capture still images usi ng the two methods described below.
• Release the shutter on the camera and save the captured images to a smart 
device.
• Use a smart device to remotely release the camera shutter and save...

118
Using the Wi-Fi (Wireless LAN) Function
1Press the Z (Wi-Fi) button on the 
camera.
• The screen shown on the right is displayed.
• If no connection conf irmation is received 
from the smart device within three minutes, 
the message  No access. is displayed and 
the camera returns to the Wi-Fi options 
screen.
• You can also select  Connect to smart 
device  in the Wi-Fi options menu to 
display the screen shown on the right.
2Set the Wi-Fi setting on the smart device to On.
• Check the user’s manual...

119
Using the Wi-Fi (Wireless LAN) Function
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•Turn off the camera.
• Select  Disable Wi-Fi  in the Wi-Fi options menu on the camera (except 
when the camera is operated by remote control).
• Set the Wi-Fi setting on the smart device to Off.
BNotes About Wi-Fi Connection
•Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies
-...

120
Using the Wi-Fi (Wireless LAN) Function
You can preselect images in the camera that you want to transfer to a smart 
device. Movies cannot be preselected for transfer.
1Select images to transfer.
You can preselect the images to transfer  to a smart device in the following 
menus:
• Mark for Wi-Fi upload  in the playback menu (A91)
• Upload from camera  in the Wi-Fi options menu ( A104)
When using  Upload from camera , the SSID and password of the camera are 
displayed after images are selected....