Nikon Camera Coolpix S7000 Reference Manual

							111
Using Menus
Photo VR
Select the vibration reduction setting used when shooting still images.
Select  Off when using a tripod to stabilize the camera during shooting.
BNotes About Photo VR
•After turning on the camera or after switching from playback mode to shooting 
mode, wait for the shooting mode screen to be displayed completely before 
taking pictures.
• Images in the camera monitor may be displayed blurry immediately after shooting.
• The effects of camera shake may not be completely eliminated in some situations.
AF Assist
Press the  d button  M z  menu icon  M Photo VR M  k  button
OptionDescription
g On (default setting) Compensation for camera shake is performed using 
lens shift VR.
Off Compensation is not performed.
Press the d button  M z  menu icon  M AF assist  M k  button
OptionDescription
a  Auto
(default setting) The AF-assist illuminator automatically lights up when 
you press the shutter-re
lease button under dim 
lighting. The illumin ator has a range of about 2.0 m (6 
ft 6 in.) at the maximum wide-angle position and 
about 2.0 m (6 ft 6 in.) at the maximum telephoto 
position.
• Note that for some shooting modes or focus areas, 
the AF-assist illuminator may not light.
Off The AF-assist illuminator does not light. 
						

							112
Using Menus
Digital Zoom
BNotes About Digital Zoom
•Digital zoom cannot be used in  the following shooting modes:
- Portrait , Night portrait , Night landscape , Backlighting  (when HDR is set), 
Easy panorama , or Pet portrait  scene mode
- Smart portrait mode
• Digital zoom cannot be used in other shooting modes when using certain settings 
(A 57).
Sound Settings
Press the  d button  M z  menu icon  M Digital zoom  M k  button
OptionDescription
On (default setting) Digital zoom is enabled.
Off Digital zoom is disabled.
Press the d button  M z  menu icon  M Sound settings  M k  button
OptionDescription
Button sound When 
On (default setting) is selected, the camera 
produces one beep when operations are performed, 
two beeps when focus is acquired on the subject, and 
three beeps when an error occurs. The welcome 
screen sound is also produced.
• Sounds are disabled when using  Pet portrait 
scene mode.
Shutter sound When 
On (default setting) is selected, the shutter 
sound is produced when the shutter is released.
• The shutter sound is not produced when using 
continuous shooting mode, when recording 
movies, or when using  Pet portrait scene mode. 
						

							113
Using Menus
Auto Off
Set the amount of time that elapses before the camera enters standby mode 
( A 14).
You can select  30 s, 1 min  (default setting),  5 min, or 30 min .
CSetting the Auto Off Function
The time that passes before the camera enters standby mode is fixed in the following 
situations:
•When a menu is displayed: 3 mi nutes (when auto off is set to 30 s or 1 min )
• When shooting using  Pet portrait auto release : 5 minutes (when auto off is set 
to  30 s  or 1 min )
• When shooting using  Smile timer: 5 minutes (when auto off is set to  30 s or 
1 min )
• When the AC Adapter is connected: 30 minutes
• When an HDMI cable is connected: 30 minutes
Press the  d button  M z  menu icon  M Auto off M  k  button 
						

							114
Using Menus
Format Card/Format Memory
Use this option to format a memory card or the internal memory.
Formatting the memory cards or internal memory permanently deletes 
all data. Data that has been deleted cannot be recovered. Make sure to 
save important images to a computer before formatting.
Formatting a Memory Card
• Insert a memory card into the camera.
• Select  Format card  in the setup menu and then press the k  button.
Formatting the Internal Memory
•Remove the memory card from the camera.
• Select  Format memory  in the setup menu and then press the  k button.
To start formatting, select  Format on the screen that is displayed and press the 
k  button.
• Do not turn the camera off or open the battery-chamber/memory card slot 
cover during formatting.
Language
Select a language for display  of camera menus and messages.
Press the d
 button M z  menu icon  M Format card/Format memory  M 
k  button
Press the  d button  M z  menu icon  M Language  M k  button 
						

							115
Using Menus
Charge by Computer
BNotes About Charging with a Computer
•When connected to a computer, the camera  turns on and starts charging. If the 
camera is turned off, charging stops.
• About 3 hours are required  to charge a fully exhausted battery. Charging time 
increases when images are transferred while the battery is charging.
• The camera turns off automatically if  there is no communication with the 
computer for 30 minutes after the battery has finished charging.
BWhen the Charge Lamp  Quickly Flashes Green
Charging cannot be performed, possibly du e to one of the reasons described below. 
• The ambient temperature is not suited to charging. Charge the battery indoors 
with an ambient temperature of 5°C to 35°C (41°F to 95°F).
• The USB cable is not connected correctly, or the battery is faulty. Make sure the USB 
cable is connecte d correctly or replace the battery if necessary.
• The computer is in sleep mode and is not supplying power. Wake up the 
computer.
• The battery cannot be char ged because the computer cannot supply power to the 
camera due to the computer’s settings or its specifications.
Press the  d button  M z  menu icon  M Charge by computer  M k  
button
OptionDescription
a  Auto
(default setting) When the camera is connected to a computer that is 
running (
A121), the battery inserted into the camera 
is automatically charged using power supplied by the 
computer.
Off The battery inserted into the camera is not charged 
when the camera is connected to a computer. 
						

							116
Using Menus
Reset All
When Reset is selected, the camera’s settings are restored to their default 
values.
• Some settings, such as  Time zone and date or Language , are not reset.
• The wireless connection is terminated if  this option is performed while Wi-Fi 
is connected.
CResetting File Numbering
To reset file numbering to “0001”, delete all images saved on the memory card or in 
the internal memory ( A17) before selecting  Reset all.
Conformity Marking
View some of the conformity marki ngs that the camera complies with.
Firmware Version
View the current camera firmware version.
•The firmware version cannot be di splayed while Wi-Fi is connected.
Press the 
d button  M z  menu icon  M Reset all  M k  button
Press the  d button  M z  menu icon  M Conformity marking  M k  
button
Press the  d button  M z  menu icon  M Firmware version  M k  button 
						

							117
Using the Wi-Fi (Wireless LAN) Function
Using the Wi-Fi (Wireless LAN) 
Function
You can perform the following functions if you install the dedicated software 
“Wireless Mobile Utility” on your smart device that runs on Android OS or iOS, 
and connect it to the camera.
Take Photos
You can capture still images usi ng the two methods described below.
• Release the shutter on the camera and save the captured images to a smart 
device.
• Use a smart device to remotely release the camera shutter and save images 
to the smart device.
View Photos
Images that are saved in the camera’s memory card can be transferred and 
viewed on your smart device. You can also preselect the images in the camera
that you want to transfer to your smart device.
BNotes About Security Settings
No security settings such as password are  configured for the camera at the time of 
purchase. We strongly recommend performing the required security settings before 
using the Wi-Fi function. Use  Options in the Wi-Fi options menu ( A76) to perform 
the security settings.
1Use your smart device to connect to the Google Play Store, 
App Store or other online apps marketplace and search for 
“Wireless Mobile Utility.”
• Check the user’s manual provided with your smart device for further details.
2Check the description and othe r information and install the 
software.
CUser’s Manual for Wireless Mobile Utility
Download the user’s manual from the website below.
• Android OS: http://nikon imglib.com/ManDL/WMAU/
• iOS: http://nikonimglib.com/ManDL/WMAU-ios/
Installing the Software  on the Smart Device
To establish a connection with the camera, press the  Z (Wi-Fi) button on the camera,
and turn on the Wi-Fi function of the smart device, and then start the “Wireless Mobile 
Utility” while  Negotiating... Please wait.  is displayed on the camera. 
						

							118
Using the Wi-Fi (Wireless LAN) Function
1Press the Z (Wi-Fi) button on the 
camera.
• The screen shown on the right is displayed.
• If no connection conf irmation is received 
from the smart device within three minutes, 
the message  No access. is displayed and 
the camera returns to the Wi-Fi options 
screen.
• You can also select  Connect to smart 
device  in the Wi-Fi options menu to 
display the screen shown on the right.
2Set the Wi-Fi setting on the smart device to On.
• Check the user’s manual provided with your smart device for further details.
• After the network names (SSIDs) that can be used for the smart device are 
displayed, select the SSID displayed on the camera.
• When  Auth./encryp.  is set to WPA2-PSK-AES  in the Wi-Fi options menu, 
the message for entering a password is displayed. 
Enter the password that is displayed on the camera.
3Start the “Wireless Mobile Utility” installed on the smart 
device, while  Negotiating... Please wait.  is displayed on 
the camera.
• The screen for selecting “Take phot os” or “View photos” is displayed.
• When the message “Cannot connect to  camera.” is displayed, return to 
step 1 and retry the procedure.
• See “Installing the Software on the Smart Device” (A 117).
CTouching an NFC-compatible Smart Device to the Camera for a 
Wi-Fi Connection
When you use a smart device that is compatible 
with near field communication (NFC) functions and 
runs on Android OS, yo u can establish a Wi-Fi 
connection and start the “Wireless Mobile Utility” by 
touching the NFC antenna on the smart device to 
the  Y (N-Mark) on the camera.
Connecting the Smart Device to the 
Camera
XXXXXXXXXXXXXXXXXX
XXXXXX
XXXXXXXXXXXXXXXX
Cancel
Password: SSID:
Connect to smart device 
						

							119
Using the Wi-Fi (Wireless LAN) Function
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•Turn off the camera.
• Select  Disable Wi-Fi  in the Wi-Fi options menu on the camera (except 
when the camera is operated by remote control).
• Set the Wi-Fi setting on the smart device to Off.
BNotes About Wi-Fi Connection
•Wi-Fi connection operations are disabled in the following situations:
- When the camera is connected to a TV, computer, or printer
- While recording movies
- While the camera is processing data such as saving images or recording movies
- When the camera is connected to a smart device
• Select  Disable Wi-Fi  in areas where the use of radio waves is prohibited.
• When Wi-Fi is connected,  Auto off is disabled.
• When Wi-Fi is connected, the batte ry drains faster than normal.
• The Wi-Fi connection is terminat ed in the following situations:
- When the battery level is low
- When starting movie recording in short movie show mode
CSecurity Settings
If no security settings (encryption and pa ssword) are configured for the camera’s 
Wi-Fi function, unauthorized third partie s may access the network and cause harm. 
We strongly recommend performing the required security settings before using the 
Wi-Fi function.
Use  Options  in the Wi-Fi options menu ( A104) to perform the security settings. 
						

							120
Using the Wi-Fi (Wireless LAN) Function
You can preselect images in the camera that you want to transfer to a smart 
device. Movies cannot be preselected for transfer.
1Select images to transfer.
You can preselect the images to transfer  to a smart device in the following 
menus:
• Mark for Wi-Fi upload  in the playback menu (A91)
• Upload from camera  in the Wi-Fi options menu ( A104)
When using  Upload from camera , the SSID and password of the camera are 
displayed after images are selected.
2Connect the camera and smart device ( A118).
•Tapping “View photos” in the “Wireless Mobile Utility” displays the 
confirmation screen to transfer the  specified images to the smart device.
BPreselecting Images to Transfer During Playback
While the camera is in playback mode, press the  Z button or use the NFC function 
to establish a Wi-Fi connection, and preselec t the displayed images that you want to 
transfer.
• You can preselect one image in full-frame playback mode. You can preselect all 
images in the sequence when the key picture is displayed for images in a 
sequence.
• You can preselect one image specified  in thumbnail playback mode. You can 
preselect all images in the sequence when the key picture is displayed for images 
in a sequence.
• You can preselect all the images captured on the selected date in calendar display 
playback mode.
This operation is not available when you use  Connect to smart device in the Wi-Fi 
options menu to establish the Wi-Fi connection.
Preselecting Images in  the Camera That 
You Want to Transfer to a Smart Device