Nikon Camera Coolpix S3700 Reference Manual

							101
Using the Wi-Fi (Wireless LAN) Function
1Press the Z (Wi-Fi) button on the 
camera.
• The screen shown on the right is displayed.
• If no connection confirmation is received 
from the smart device within three minutes, 
No access. is displayed and the camera 
returns to the Wi-Fi options screen.
• You can also select  Connect to smart 
device  in the Wi-Fi options menu to 
display the screen shown on the right. 
2Set the Wi-Fi setting on the smart device to On.
• Check the user’s manual provided with your smart device for further details.
• After the network names (SSIDs) that ca n be used for the smart device are 
displayed, select the SSID displayed on the camera.
• When  Auth./encryp.  in the Wi-Fi options menu is set to WPA2-PSK-AES , 
the message for entering a password is displayed. Enter the password that is 
displayed on the camera.
3While “Negotiating... Please wait.” is displayed on the 
camera, start the “Wireless Mobile Utility” installed on the 
smart device.
• The screen for selecting “Take phot os” or “View photos” is displayed.
• When the message “Cannot connect to camera.” is displayed, return to step 
1 and retry the procedure.
• “Installing the Software on the Smart Device” ( A100).
Connecting the Smart Device to the 
Camera
Connect to smart device
XXXXXXXXXXXXXXXXXX
XXXXXX
Cancel Cancel
SSID: 
						

							102
Using the Wi-Fi (Wireless LAN) Function
CTouching an NFC-compatible Smart Device to the Camera for a 
Wi-Fi Connection
When you use an Android OS smart device that is 
compatible with near field communication (NFC) 
functions, you can establish a Wi-Fi connection and start 
the “Wireless Mobile Utility” by touching the NFC antenna 
of the smart device to the Y (N-Mark) on the camera.
To Terminate the Wi-Fi Connection
Perform one of the operations described below.
•Turn off the camera.
• Select  Disable Wi-Fi  in the Wi-Fi options menu on the camera (except when the 
camera is operated by remote control).
• Set the Wi-Fi setting on  the smart device to Off.
BNotes About Wi-Fi Connection
•Wi-Fi connection operations are disabled in the following situations:
- When using the camera’s USB connection
- While recording movies
- While the camera is processing data such as saving images or recording movies
- When the camera is connected to a smart device
• Select  Disable Wi-Fi  in areas where the use of radio waves is prohibited.
• When Wi-Fi is connected,  Auto off is disabled.
• When Wi-Fi is connected, the battery drains faster than normal.
• If the battery level is low, the Wi-Fi connection is disconnected.
CSecurity Settings
If no security settings (encryption and pa ssword) are configured for the camera’s 
Wi-Fi function, unauthorized third partie s may access the network and cause harm. 
We strongly recommend performing the required security settings before using the 
Wi-Fi function.
Use  Options  in the Wi-Fi options menu ( A86) to perform the security settings. 
						

							103
Using the Wi-Fi (Wireless LAN) Function
You can preselect images in the camera that you want to transfer to a smart 
device. Movies cannot be preselected for transfer.
1Select images to transfer.
You can preselect the images to transfer to a smart device in the following 
menus:
• Mark for Wi-Fi upload  in the playback menu (A78)
• Upload from camera  in the Wi-Fi options menu ( A86) 
When using Upload from camera , the SSID and password of the camera are 
displayed after images are selected.
2Connect the camera and smart device ( A101).
When you tap “View Photos” in the “Wireless Mobile Utility”, the confirmation 
screen is displayed and the specified images are transferred to the smart 
device.
BPreselecting Images to Transfer During Playback
While the camera is in playback mode, press the  Z (Wi-Fi) button or use the NFC 
function to establish a Wi-Fi connection, an d preselect the displayed images that you 
want to transfer.
• In full-frame playback mode, you can add one image at a time.
• In thumbnail playback mode, you can add one image that is selected by the cursor.
• In calendar display mode, you can add all images that were captured on the 
selected date.
This operation is not available when you use  Connect to smart device in the Wi-Fi 
options menu to establish the Wi-Fi connection.
Preselecting Images in the Camera That 
You Want to Transfer to a Smart Device 
						

							104
Connecting the Camera to a TV, Printer, or Computer
Connecting the Camera to a TV, 
Printer, or Computer
You can enhance your enjoyment of images and movies by connecting the 
camera to a TV, printer, or computer.
•Before connecting the camera to an external device, make sure the 
remaining battery level is sufficient and turn the camera off. Before 
disconnecting, make sure to turn the camera off.
• If the AC Adapter EH-62G (available se parately) is used, this camera can be 
powered from an electrical outlet. Do not use any other make or model of 
AC adapter as it may cause the camera to heat up or malfunction.
• For information about the connection methods and subsequent operations, 
refer to the documentation included with the device in addition to this 
document.
Insert the plug straight. USB/audio/video 
output connector
Open the connector cover. 
						

							105
Connecting the Camera to a TV, Printer, or Computer
Viewing images on a TVA106
Images and movies captured with the camera can be viewed 
on a TV.
Connection method: Connect the video and audio plugs of an 
optional audio video cable to the TV’s input jacks.
Printing images without using a computerA 107
If you connect the camera to a PictBridge-compatible printer, 
you can print images without using a computer.
Connection method: Connect the camera directly to the 
printer’s USB port with the USB cable.
Viewing and organizing images on a computerA 111
You can transfer images to a computer to perform simple 
retouching and manage image data.
Connection method: Connect the camera to the computer’s 
USB port with the USB cable.
• Before connecting to a computer, install ViewNX 2 on the 
computer ( A111).
• If any USB devices that draw the power from the computer 
are connected, disconnect them from the computer before 
you connect the camera to it. Connecting the camera and 
other USB-powered devices to the same computer 
simultaneously may cause a camera malfunction or 
excessive power supply from the computer, which could 
damage the camera or memory card. 
						

							106
Connecting the Camera to a TV, Printer, or Computer
1Turn off the camera and connect it to the TV.
•Connect the yellow plug to the video-in jack and the white plug to the 
audio-in jack on the TV.
• Make sure that the plugs are properly oriented. Do not insert or remove the 
plugs at an angle when connecting or disconnecting them.
2Set the TV’s input to external video input.
•See the documentation provided with your TV for details.
3Hold down the c  (playback) 
button to turn on the camera.
• Images are displayed on the TV.
• The camera monitor does not turn on.
Connecting the Camera to a TV (Playback 
on a TV)
Yellow White 
						

							107
Connecting the Camera to a TV, Printer, or Computer
Users of PictBridge-compatible printers can connect the camera directly to the 
printer and print images without using a computer.
Connecting the Camera to a Printer
1Turn on the printer.
2Turn off the camera and connect it to the printer using the 
USB cable.
• Make sure that the plugs are properly oriented. Do not insert or remove the 
plugs at an angle when connecting or disconnecting them.
3The camera is automatically turned on.
•The  PictBridge  startup screen (
1) is displayed in the camera monitor, 
followed by the  Print selection screen (
2).
Connecting the Camera to a Printer (Direct 
Print)
Print selection15/11/201512 
						

							108
Connecting the Camera to a TV, Printer, or Computer
BIf the PictBridge Startup Screen Is Not Displayed
When Auto is selected for  Charge by computer  (A 98), it may be impossible to 
print images with direct connection of the ca mera to some printers. If the PictBridge 
startup screen is not displayed after the camera is turned on, turn the camera off and 
disconnect the USB cable. Set Charge by computer  to Off  and reconnect the 
camera to the printer.
Printing Images One at a Time
1Use the multi selector JK  to 
select the desired image and press 
the  k button.
•Move the zoom control toward  f(h ) to 
switch to thumbnail playback or g (i ) to 
switch to full-frame playback.
2Use  HI  to select  Copies and 
press the k  button.
•Use  HI  to set the desired number of 
copies (up to nine) and press the  k button.
3Select  Paper size  and press the k  
button.
• Select the desired paper size and press the 
k  button.
• To print with the paper size setting 
configured on the printer, select  Default.
• The paper size options available on the 
camera vary depending on the printer that 
you use.
4Select  Start print  and press the  k 
button.
• Printing starts.
Print selection15/11/2015
PictBridge
1
Copies
Paper size Start print  prints
PictBridge
4
Copies
Paper size Start print prints
PictBridge
4
Copies
Paper size Start print prints 
						

							109
Connecting the Camera to a TV, Printer, or Computer
Printing Multiple Images
1When the Print selection  screen 
is displayed, press the d  (menu) 
button.
2Use the multi selector HI  to 
select  Paper size  and press the  k 
button.
• Select the desired paper size and press the 
k  button.
• To print with the paper size setting 
configured on the printer, select  Default.
• The paper size options available on the 
camera vary depending on the printer that you use.
• To exit the print menu, press the d  button.
3Select Print selection  or Print all 
images  and press the k  button.
Print selection15/11/2015
Print menu
Print selection
Print all images
Paper size
Print menu Print selection
Print all images
Paper size 
						

							110
Connecting the Camera to a TV, Printer, or Computer
Print selectionSelect images (up to 99) and the number 
of copies (up to 9) of each.
•Use the multi selector  JK to select 
images, and use  HI to specify the 
number of copies to be printed.
• Images selected for printing are 
indicated by  M and the number of 
copies to be printed. To cancel the print 
selection, set the number of copies to 0.
• Move the zoom control toward  g(i ) to switch to full-frame playback or 
f (h ) to switch to thumbnail playback.
• Press the  k button when setting is complete. When the screen for 
confirming the number of print copies is displayed, select Start print 
and press the k  button to start printing.
Print all images
One copy each of all images saved in the internal memory, or on the 
memory card, is printed.
•When the screen for confirming the number of print copies is displayed, 
select  Start print  and press the  k button to start printing.
Print selection
Back Back
3
1
1 10