Nikon Camera Coolpix S3700 Reference Manual

							81
Using Menus
Copy (Copy Between the Memory Card and 
Internal Memory)
Images can be copied between a memory card and the internal memory.
•When a memory card that contains no images is inserted and the camera is 
switched to playback mode, Memory contains no images.  is displayed. In 
that case, press the  d button to select Copy .
1Use the multi selector HI  to 
select a destination option to 
which images are copied and 
press the k  button. 
2Select a copy option and press the 
k button.
•When you choose Selected images , use the 
image selection screen to specify images 
( A 82).
BNotes About Copying Images
•Only files in formats that this camera can record can be copied.
• Operation is not guaranteed with images captured with another make of camera 
or that have been modified on a computer.
Press the  c button (playback mode)  M d  button M  Copy M k  
button
Camera to card
Card to camera
Copy
Selected images
All images
Camera to card 
						

							82
Using Menus
The Image Selection Screen
When an image selection screen such as the 
one shown on the right is displayed while 
operating the camera, follow the procedures 
described below to select the images.
1Use the multi selector JK to 
select an image.
• Move the zoom control ( A1) toward g (i ) 
to switch to full-frame playback or  f(h ) 
to switch to thumbnail playback.
• Only one image can be selected for  Rotate 
image . Proceed to step 3.
2Use HI  to select or deselect (or 
to specify the number of copies).
• When an image is selected, an icon is 
displayed below the image. Repeat steps 1 
and 2 to select additional images.
3Press the k  button to apply image selection.
•When a confirmation dialog is displayed, follow the on-screen instructions to 
operate.
Protect
Back Back
ProtectBack
Back
ProtectBack
Back 
						

							83
Using Menus
Movie Options
Select the desired movie option to record. The movie options that can be 
selected vary depending on the Video mode setting (A97).
• Memory cards with an SD Speed Class rating of 6 or faster are 
recommended for recording movies (A136).
* When recording in the internal memory, the default setting is  g 480/30p  or 
W  480/25p , and f 720/30p  or V  720/25p  cannot be selected.
The Movie Menu
Enter shooting mode M  d  button  M D  menu icon  M Movie options 
M  k  button
Option
(Image size/Frame  rate)Image sizeAspect ratio (horizontal to  vertical)
f 720/30p
V  720/25p
(default setting*) 1280 × 720 16:9
g  480/30p
W  480/25p 640 × 480
4:3
u  240/30p
q  240/25p 320 × 240 
4:3 
						

							84
Using Menus
Autofocus Mode
Set how the camera focuses in movie mode.Enter shooting mode 
M d  button  M D  menu icon  M Autofocus mode 
M  k  button
OptionDescription
A  Single AF 
(default setting) Focus is locked when movie recording starts.
Select this option when 
the distance between the 
camera and subject will remain fairly consistent 
during movie recording.
B  Full-time AF The camera focuses continuously during movie 
recording.
Select this option when 
the distance between the 
camera and subject will change significantly during 
recording. The sound of the camera focusing may be 
heard in the recorded movie. Use of  Single AF is 
recommended to prevent the sound of the camera 
focusing from interfering with recording. 
						

							85
Using Menus
Movie VR
Select the vibration reduction setting used when recording movies.
Select Off when using a tripod to stabilize the camera during shooting.
BNotes About Movie VR
•The effects of camera shake may not be completely eliminated in some situations.
Wind Noise Reduction
Enter shooting mode M  d  button  M D  menu icon  M Movie VR  M 
k button
OptionDescription
V  On (hybrid) 
(default setting) Performs optical compensation for camera shake 
using lens shift VR and simultaneously performs 
electronic VR using image processing. The angle of 
view (i.e., the area visible in the frame) becomes 
narrower.
g  On Performs compensation for camera shake using lens 
shift VR.
Off Compensation is not performed.
Enter shooting mode M d  button  M D  menu icon  M Wind noise 
reduction  M k button
OptionDescription
Y  On Reduces the sound that is produced when wind 
passes over the microphone during movie recording. 
Other sounds may become difficult to hear during 
playback.
Off (default setting) Wind noise reduction is disabled. 
						

							86
Using Menus
Configure the Wi-Fi (wireless LAN) settings to connect the camera and a smart 
device.
The Wi-Fi Options Menu
Press the d button M  J  menu icon  M k  button
OptionDescription
Connect to 
smart 
device Select when wirelessly connecting the camera and a smart device.
See “Using the Wi-Fi (Wireless LAN) Function” (
A100) for more 
information.
Upload 
from 
camera Select when wirelessly connecting the camera and a smart device. 
See “Using the Wi-Fi (Wireless LAN) Function” (
A100) for more 
information.
• Before establishing the wireless co nnection, select the images to 
upload on the image selection screen ( A82). After images are 
selected, the SSID and password of the camera are displayed on 
the screen.
Disable 
Wi-Fi Select to terminate the wireless connection between the camera 
and a smart device. See “Using the Wi-Fi (Wireless LAN) Function” 
(
A 100) for more information.
Options SSID
: Change the SSID. The SSID configured here is displayed on 
the smart device. Set a 1- to 24-character alphanumeric SSID.
Auth./encryp. : Select whether or not to encrypt the 
communications between the camera and the connected smart 
device. Communications are not encrypted when  Open (default 
setting) is selected.
Password : Set the password. Set an 8- to 16-character 
alphanumeric password.
Channel : Select the channel used for wireless connections.
Current 
settings Display the current settings.
Restore 
default 
settings Restore the Wi-Fi settings to their default values. The wireless 
connection is terminated if this option is performed while Wi-Fi is 
connected. 
						

							87
Using Menus
Operating the Text Input Keyboard
•Use the multi selector  HIJK to select 
alphanumeric characters. Press the  k button 
to enter the selected character in the text 
field and move the cursor to the next space.
• To move the cursor in the text field, select N  
or  O  on the keyboard, and press the  k 
button.
• To delete one character, press the  l button.
• To apply the setting, select  P on the 
keyboard and press the  k button.
SSID
Delete Delete
Back
Back
Text field
Keyboard 
						

							88
Using Menus
Time Zone and Date
Set the camera clock.
Setting the Time Zone
1Use the multi selector HI to 
select  Time zone  and press the  k 
button.
The Setup Menu
Press the  d button M  z  menu icon  M Time zone and date  M k  
button
OptionDescription
Date and time •
Select a field: Press the 
multi selector JK .
• Edit the date and time: 
Press  HI.
• Apply the setting: Select 
the minute setting and 
press the  k button.
Date format Select 
Year/Month/Day , Month/Day/Year , or Day/Month/
Year .
Time zone Set time zone and daylight saving time. 
•
When  Travel destination  (x ) is set after having set the 
home time zone ( w), the time difference between the 
travel destination and the home time zone is automatically 
calculated, and the date and time are saved for the selected 
region.
Date and time
Edit Edit
D
M
Y
h m
Time zone and date
Date and time
Date format
Time zone
15/11/2015  15:30 
						

							89
Using Menus
2Select w Home time zone  or x 
Travel destination  and press the 
k  button.
•The date and time displayed in the monitor 
changes depending on whether the home 
time zone or travel destination is selected.
3Press  K.
4Use  JK  to select the time zone.
•Press  H to enable daylight saving time 
function, and  W is displayed. Press  I to 
disable the daylight saving time function.
• Press the  k button to apply the time zone.
• If the correct time is not displayed for the 
home or travel destination time zone 
setting, set the appropriate time in  Date 
and time .
Time zone
Home time zone
Travel destination
15/11/2015  15:30
Time zoneHome time zone
Travel destination
15/11/2015  15:30
Back Back 
						

							90
Using Menus
Monitor Settings
Photo Info
Press the d button M  z  menu icon  M Monitor settings M  k  button
OptionDescription
Photo info Set whether or not to display information in the monitor.
Image review Set whether or not to display the captured image immediately 
after shooting.
•
Default setting: On
Brightness Adjust the brightness.
•
Default setting: 3
Shooting modePlayback mode
Show info
Auto info
(default setting) The same information as shown in 
Show info is displayed, 
and it is hidden as shown in  Hide info if no operations are 
performed for a few seconds. The information is displayed 
again when an operation is performed.
Hide info
8m  0s8m  0s14001400
4 / 44 / 4
15/11/2015  15:3015/11/2015  15:300004. JPG0004. JPG