Netgear Wndr37002 Manual

							Technical Specifications37
Physical Specifications
Dimensions 223 x 153 x 31 mm (8.8 x 6.0 x 1.2 in)
Weight 0.5 kg   (1.2 lb)
Environmental Specifications
Operating temperature 0 to 40 C    (32º to 104º F)
Operating humidity 90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of: FCC Part 15 Class B
EN 55 022 (CISPR 22), Class B
C-Tick N10947
Interface Specifications
LAN 10BASE-T, or 100BASE-Tx/1000BASE-Tx, RJ-45
WAN 10BASE-T, or 100BASE-Tx/1000BASE-Tx, RJ-45
Wireless Maximum wireless signal rate complies with the IEEE 
802.11 standard. Actual throughput will vary. Network 
conditions and environmental factors, including 
volume of network traffic, building materials and 
construction, and network overhead, lower actual 
data throughput rate. 
Radio Data Rates Auto Rate Sensing
Frequency 2.4 GHz & 5 GHz
Data Encoding Standards
IEEE 802.11n version 2.0
IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz
IEEE 802.11n, IEEE 802.11a 5.0 GHz
Maximum Computers Per Wireless 
NetworkLimited by the amount of wireless network traffic 
generated by each node. Typically 30-70 nodes.
Operating Frequency Ranges (2.4GHz) 2.412–2.462 GHz (US) 
2.412–2.472 GHz (Japan)
2.412–2.472 GHz (Europe ETSI)
Table 4.  Wireless Router Default Configuration Settings (continued)
FeatureDefault Setting 
						

							Technical Specifications38
Restoring the Default Password and Configuration 
Settings
You can restore the factory default configuration settings that reset the router’s user name to 
admin, the password to password, and the IP address to 192.168.1.1. 
To restore the factory default configuration settings:
1.
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings 
button, located on the bottom of the router, for about 5 seconds, until the Power light begins to 
blink (see “Router Label” on page 6).
2.Release the restore factory settings button, and wait for the router to restart, and for the Power 
light to stop blinking and become solid green. 
The factory default settings will be restored so that you can access the router from your Web 
browser using the factory defaults.
Operating Frequency Ranges (5G) 5.18–5.24 + 5.745–5.825 GHz (US)
5.18–5.24 GHz (Europe ETSI)
802.11 Security 40-bit (also called 64-bit) and 128-bit WEP, WPA-
PSK and WPA2-PSK.
This procedure will erase all the current configuration settings and restore the 
factory defaults.
Table 4.  Wireless Router Default Configuration Settings (continued)
FeatureDefault Setting 
						

							Related Documents39
Related Documents
This table provides links to reference documents that you can use to gain a more complete 
understanding of the technologies used in your NETGEAR product.
Table 5.  
Document Link
TCP/IP Networking 
Basics
http://documentation.netgear.com/reference/enu/tcpip/index.htm
Preparing Your Network http://documentation.netgear.com/reference/enu/wsdhcp/index.htm
Glossaryhttp://documentation.netgear.com/reference/enu/glossary/index.htm 
						

							40
Registration and Certifications
Product Registration, Support, and Documentation 
Register your product at http://www.NETGEAR.com/register. You must register before you can use our telephone 
support service. Product updates and Web support are always available by going to http://www.netgear.com/support. 
Setup documentation is available on the CD, on the support website, and on the documentation website. When the N600 
wireless gigabit router is connected to the Internet, click the KnowledgeBase link to view support information, or click 
the Documentation link to view the online Reference Manual for this N600 wireless gigabit router.
Maximum Wireless Signal Rate Derived from IEEE Standard 802.11 Specifications
Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, 
building materials and construction, and network overhead, lower actual data throughput rate.
Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.