Netgear Wndr37002 Manual

							Getting to Know Your Wireless Router 7
Installing Your Wireless Router
To help you set up your router and get on the Internet quickly, the Resource CD contains a Smart 
Wizard™. The Smart Wizard walks you through the steps required to connect your router and 
PC(s); configure your internet settings; configure your wireless settings; and enable wireless 
security for your network. When you have finished, you will be Internet ready!
You can set up your N600 wireless gigabit router using one of two methods:
•Smart Wizard Setup: The Smart Wizard setup is available on your Resource CD. See 
“Installing Your Wireless Router Using Smart Wizard” on page 9 to use the Smart Wizard. 
– This is the easiest option. The wizard guides you through the setup process. It automates 
many of the steps and verifies that the steps have been successfully completed.
– Smart Wizard requires a PC running Microsoft Windows.
•Manual Setup: If you cannot or prefer not to use the Smart Wizard, see “Installing Your 
Wireless Router Manually (Advanced and Linux Users)” on page 11. For example, if you are 
using a Linux operating system or are technically knowledgeable, select this option. If you 
choose to use this option and install your router manually, for best results, install and set up 
your router in this order:
1. Install and connect your wireless router to your network (see “Connecting Your N600 
Wireless Gigabit Router” on page 11).
2. Set up your wireless router for Internet access (see “Setting Up Your Router for Internet 
Access” on page 15).
3. Configure your wireless network and select wireless security settings to protect your 
wireless network (see “Configuring Your Wireless Network” on page 19).
If you have a Linux system, you need to use the manual installation method (see 
“Installing Your Wireless Router Manually (Advanced and Linux Users)” on 
page 11).
Before running the Smart Wizard on a corporate PC to set up your home 
router, check with your company’s network support staff. Corporate 
network settings or Virtual Private Network (VPN) client software may 
conflict with the default settings of a home router. If you are unsure about 
whether there might be a conflict, use a different computer. 
						

							Getting to Know Your Wireless Router 8
Updating Your Router Firmware
NETGEAR is always improving the operability and features included with your router. To make it 
easy for you to receive the best, most up-to-date features of your router, NETGEAR provides a 
variety of methods for updating your product. 
• The Smart Wizard installation assistant lets you check for and install updates as part of the 
setup activity.
• The router includes an update feature that lets you check for and install updates. You must be 
logged in to the router to use this feature (see the Reference Manual for details).
These options are discussed in “Installing Your Wireless Router Manually (Advanced and Linux 
Users)” on page 11.  
						

							Installing Your Wireless Router Using Smart Wizard 9
Installing Your Wireless Router Using
Smart Wizard
Prepare the following before you set up your router, making sure that: 
• You are using a computer with either a Mac operating system or a Windows operating system 
(Windows 7, Windows Vista, Windows 2000, or Windows XP with Service Pack 2 or above).
• You have an Internet service connection through an Internet Service Provider (ISP).
• Your PC has a wired Ethernet connection (not a wireless connection).
• For cable modem service, that you use the computer you first used to set up your Internet 
service.
The NETGEAR Smart Wizard takes you through the procedure to connect your router and PC(s). 
It then helps you to configure your wireless settings and enable wireless security for your network. 
The Smart Wizard guides you through the setup and configuration process by automating many of 
the steps. At each step in the setup process, the Smart Wizard checks to ensure that the steps you 
perform are successfully completed.
The wizard setup process takes about 20 minutes to complete.
To set up your router using the Smart Wizard:
1.
To start the Smart Wizard:
• For Windows users,
– Insert the Resource CD into your PC. The CD will automatically start and detect the 
language you are using on your PC. Select a different language option, if you prefer.
– In the CD’s menu, click Setup to start the Smart Wizard. 
•For Mac users, double-click the MacWizard program.
2.When the Smart Wizard prompts you to Check for Firmware Updates, click Yes to check the 
NETGEAR website for new router firmware; or check No to check for updates later (see 
“Accessing Your Router After Installation and Checking for New Firmware” on page 19). 
If the CD does not automatically start, browse the CD and double-click 
on . 
						

							Installing Your Wireless Router Using Smart Wizard 10
3.Follow the instructions and prompts to complete the installation.
The Smart Wizard guides you through installing your router, connecting your router to the 
Internet, configuring your wireless network settings, and selecting the optimum security 
protection for your network. If you choose not to select a security option during installation, 
you can always access the router’s user interface later to select a security option (see “Setting 
Your SSID and Wireless Security Manually” on page 20 or “Using Push N Connect (WPS) to 
Configure Your Wireless Network” on page 23).
At the close of installation: 
•For Windows users, the Smart Wizard places a Router_Setup.html file on your 
computer’s desktop so that you can view the router settings. It also places the Router 
Login   shortcut on the desktop for you to access the router’s main menu.
•For Mac users, the Smart Wizard places a Router_Setup.pdf file on your desktop.
You are now connected to the Internet!
After connecting to the Internet, you can:
• Log in to the router and check for new firmware. Refer to the bottom label for the default login 
information, or see the steps in “Accessing Your Router After Installation and Checking for 
New Firmware” on page 19.
• Set up additional wireless computers in your network for Internet access (see “Configuring 
Your Wireless Settings and Security Options” on page 20).
For advanced features not covered in this manual, see the Reference Manual on your Resource CD. 
A link to the online Reference Manual also is available from the router interface.
To ensure optimum performance of your high-speed wireless router, the 
wireless adapter card for each computer in your network should support the 
same technology as your router (see the online User Manual for more 
information).
The factory default state is restored when you use the restore factory settings button. 
See “Restoring the Default Password and Configuration Settings” on page 38 for more 
information about this feature. 
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 11
Installing Your Wireless Router Manually
(Advanced and Linux Users)
Before installing and connecting your router manually, review the list below and make sure that 
you have all of the necessary information.
• Internet ADSL or cable service connection to an Internet Service Provider (ISP).
• The configuration information your ISP gave you. Depending on how your Internet account 
was set up, you might need the following information to set up your N600 wireless gigabit 
router and access the Internet: 
– Host and Domain Name
– Internet Login Name and Password (frequently an email address and password)
– Domain Name Server (DNS) Addresses
– Fixed or Static IP Address
Your ISP should have provided you with all the information needed to connect to the Internet. 
If you cannot locate this information, contact your ISP. 
If you have not already done so:
• Check the package contents of your router to ensure that it is complete (see “Unpacking Your 
New Wireless Router” on page 1”).
• Select an optimum location for your N600 wireless gigabit router after reviewing the 
guidelines presented in “Positioning Your Wireless Router” on page 6.”
Connecting Your N600 Wireless Gigabit Router 
Before you install your N600 wireless gigabit router, make sure that the Internet Protocol (TCP/IP) 
Property settings on your computer are set to “automatically obtain an IP address” using DHCP 
and “Obtain DNS server address automatically.” You can check these settings by looking at the 
TCP/IP Properties of your Internal Network Connections, which are accessible through the  
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 12
Control Panel of your computer. If you are unsure about this, refer to the documentation for your 
computer or see the link to TCP/IP Addressing in “Related Documents” on page 39.
There are two steps to setting up your N600 wireless gigabit router:
1. Connect the router to the ADSL or cable modem, and connect a computer to the router.
2. Configure the router to use your Internet service. 
To connect your N600 wireless gigabit router:
1.
Connect the N600 wireless gigabit router, the computer, and the modem.
a.Turn off your computer.
b.Turn off and unplug the cable or ADSL broadband modem. If your modem has a backup 
battery, remove it as well.
c.Locate the Ethernet cable (1) that connects your computer to the modem.
2.Disconnect the cable from the modem (2). You will connect it to the router later.
3.Locate the Ethernet cable that came with the NETGEAR product. Securely insert that Ethernet 
cable into your modem and into the Internet port of the N600 wireless gigabit router (3). 
If you are replacing an existing router, disconnect it completely from your network 
and set it aside before starting to install your new router. 
Figure 5
1
2 
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 13
4.Locate the cable you removed from the modem in step 2. Securely insert that cable (4) into a 
LAN port on the router such as LAN port 1.
Your network cables are connected, and you are ready to start your network. It is important that 
you start your network in the correct sequence.
To start your network in the correct sequence.
 
Figure 6
Figure 7
Failure to start or restart your network in the correct sequence could prevent you 
from accessing the Internet.
3
4 
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 14
1.First, plug in and turn on the cable or DSL modem (if your modem has a backup battery, plug 
it back in). Wait 2 minutes.
2.Now, plug the power cord into your N600 wireless gigabit router and into a power outlet. Wait 
1 minute. 
3.Last, turn on your computer. It might take several minutes for your router to establish a 
connection with your computer and your Internet provider.
Verifying Your Connection
Verify that your router is connected correctly by checking the wireless router status lights (as 
illustrated in Figure 8.
Check the N600 wireless gigabit router status lights to verify the following:
•Power. The Power light (1) should turn solid green. If it does not, see “Checking Basic Router 
Functions” on page 27.
•Operating Mode. The 2.4 GHz N/G-Band light (2) should be on; the 5.0 GHz N-Band light 
(3) should be on. 
•USB. The USB light (4) should be lit if a USB device is connected and ready to be used. The 
light will be fast blinking green when the USB device is in use.
For DSL customers, if software logs you in to the Internet, do not run that 
software. You might need to go to the Internet Explorer Tools menu, select 
Internet Options, and then click the Connections tab, where you can select 
Never dial a connection.
Figure 8
12345678 
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 15
•Internet. The Internet port light (5) should be lit. If it is not, make sure that the Ethernet cable 
is securely attached to the N600 wireless gigabit router Internet port and that the modem, and 
that the modem is powered on.
•LAN. At least one LAN light (6) should be lit. Green indicates that your computer is 
communicating at 1 Gbps; amber indicates 10/100 Mbps. If a LAN light is not lit, check that 
the Ethernet cable from the computer to the router is securely attached at both ends, and that 
the computer is turned on.
•WLAN On/Off. The Wireless Local Area Network (WLAN) button (7) turns the 2.4 GHz and 
5.0 GHz wireless radios on and off.
•WPS. The WPS button (8) shows blinking green to indicate WPS activity, when the device is 
in the 2 minute interval to synchronize security or there is a WPS error.
Setting Up Your Router for Internet Access
When configuring your wireless router manually, you must log in to your N600 wireless gigabit 
router to set it up initially and to make any changes to your wireless router’s settings later.
To access your router:
1.
Connect to the N600 wireless gigabit router by typing http://www.routerlogin.net in the 
address field of your browser, and then press Enter.
The factory default state is reset when you use the Restore Factory Settings button. 
See “Restoring the Default Password and Configuration Settings” on page 38 for 
more information.
Figure 9
Connect to the N600 wireless gigabit router by typing any one of these three URLs 
in the address field of your browser, then pressing Enter:
• http://www.routerlogin.net 
• 
http://www.routerlogin.com 
• http://192.168.1.1 
						

							Installing Your Wireless Router Manually (Advanced and Linux Users) 16
A login window such as the one in the following figure displays:
2.For security reasons, the router has its own user name and password. When prompted, enter 
admin for the router user name and password for the router password, both in lowercase 
letters. 
3.A greeting message displays reminding you to use the Firmware Upgrade periodically, and to 
take advantage of the Wireless-N feature of the router. Click the Close Window button.
The Router Upgrade screen will display, asking you to check for a new version of the 
firmware.
4.Click Check to check for new firmware (recommended). The router will automatically check 
the NETGEAR database for a new firmware image file. If no new firmware version is 
available, the message “No New Firmware Version Available” will display. (If you select 
“No,” you can check for new firmware later; see the online User Manual).
Figure 10
The router user name and password are not the same as any other user name or 
password you might use to log in to your Internet connection.