Netgear R7000p Nighthawk Smart Wifi Router With Mu Mimo User Manual

The IP address and subnet mask identify which addresses are local to a specific device and which must
be reached through a gateway or router.
7.Change the RIP settings.
Router Information Protocol (RIP) allows a router to exchange routing information with other routers.
a.Select the RIP direction:
•Both.The router broadcasts its routing table periodically and incorporates information that it
receives.
•Out Only.The router broadcasts its routing table periodically.
•In Only.The router incorporates the RIP...

4.Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.Make sure that the Use Router as DHCP Server check box is selected.
6.Specify the range of IP addresses that the router assigns:
a.In the Starting IP Address field, type the lowest number in the range.
This IP address must be in the same subnet as the router.
b.In the Ending IP Address field, type the number at the end of the range of IP addresses.
This IP address must be in the same subnet as the router.
7.Click the Apply button.
Your...

Your settings are saved.
7.(Optional) If this service is disabled and no other DHCP server is on your network, set your computer
IP addresses manually so that the computers can access the router.
Manage Reserved LAN IP Addresses
When you specify a reserved IP address for a computer on the LAN, that computer always receives the
same IP address each time it accesses the router’s DHCP server. Assign reserved IP addresses to computers
or servers that require permanent IP settings.
Reserve an IP Address
To...

Edit a Reserved IP Address
To edit a reserved address entry:
1.Launch a web browser from a computer or WiFi device that is connected to the network.
2.Type http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.Select the radio button next to the reserved address....

Use the WPS Wizard for WiFi Connections
The WPS Wizard helps you add a WPS-enabled device to your WiFi network without typing the WiFi
password.
To use the WPS Wizard:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Type http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED...

To specify basic WiFi settings:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Type http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select Wireless.
The Wireless Settings page displays.
You can specify the settings for the 2.4 GHz band and 5 GHz band.
5.From the Region menu, select...

•Is your computer or mobile device connected to another WiFi network in your area? Some WiFi
devices automatically connect to the first open network without WiFi security that they discover.
•Is your computer or mobile device trying to connect to your network with its old settings (before you
changed the settings)? If so, update the WiFi network selection in your computer or mobile device
to match the current settings for your network.
Change the WiFi Mbps Settings
The data rate for high-speed...

A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select Wireless.
The Wireless Settings page displays.
5.Under Security Options, select a WPA option.
The WPA2 options use the newest standard for the strongest security.WPA2-PSK (AES) is the default
setting.
The Passphrase field displays.
6.In the Passphrase field, enter the network key (password).
It is a...

Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find your network and
connect to it. If you clear this check box, that creates a hidden network.
7.Give the guest network a name.
The guest network name is case-sensitive and can be up to 32 characters.You then manually configure
the WiFi-enabled devices in your network to use the guest network name in addition to the main SSID.
8.For the WiFi channel and mode, leave the default settings selected.
9.Select a security...

4.Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5.In the 2.4 GHz and 5 GHz sections, select or clear the Enable Wireless Router Radio check boxes.
Clearing these check boxes turns off the WiFi feature of the router for each band.
6.Click the Apply button.
If you turned off both WiFi radios, the WiFi On/Off LED and the WPS LED turn off.
If you turned on the WiFi radios, the WiFi On/Off LED and the WPS LED light.
Note
Set Up a WiFi Schedule
You can turn...