Netgear R7000p Nighthawk Smart Wifi Router With Mu Mimo User Manual

To change the language:
1.Launch a web browser from a computer or WiFi device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.In the upper right corner, select a language from the menu.
5.When prompted, click the OK button to confirm this change.
The page refreshes with the language...

3
Specify Your Internet Settings
Usually, the quickest way to set up the router to use your Internet connection is to allow the genie to detect the
Internet connection when you first access the router with a web browser.You can also customize or specify
your Internet settings.
This chapter contains the following sections:
•Use the Internet Setup Wizard on page 23
•Manually Set Up the Internet Connection on page 23
•Specify IPv6 Internet Connections on page 25
•Change the MTU Size on page 35
22 

Use the Internet Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automatically set up your router.The
Setup Wizard is not the same as the pages that display the first time you connect to your router to set it up.
To use the Setup Wizard:
1.Launch a web browser from a computer or WiFi device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is...

4.Select Internet.
The Internet Setup page displays.
5.In the Does your Internet connection require a login? section, leave the No radio button selected.
6.If your Internet connection requires an account name or host name, type it in the Account Name (If
Required) field.
7.If your Internet connection requires a domain name, type it in the Domain Name (If Required) field.
For the other sections on this page, the default settings usually work, but you can change them.
8.Select an Internet IP Address radio...

4.Select Internet.
The Internet Setup page displays.
5.In the Does your Internet connection require a login? section, select the Yes radio button.
6.From the Internet Service Provider menu, select the encapsulation method:PPPoE, L2TP, or PPTP.
7.In the Login field, enter the login name that your ISP gave you.
This login name is often an email address.
8.In the Password field, type the password that you use to log in to your Internet service.
9.If your ISP requires a service name, type it in the Service...

To set up an IPv6 Internet connection:
1.Launch a web browser from a computer or WiFi device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page displays.
5.From the Internet Connection Type menu, select the IPv6 connection type:
•If...

Use Auto Config for an IPv6 Internet Connection
To set up an IPv6 Internet connection through autoconfiguration:
1.Launch a web browser from a WiFi-enabled computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > Advanced Setup > IPv6.
The IPv6 page...

If you do not specify an ID here, the router generates one automatically from its MAC address.
10.Select an IPv6 Filtering radio button:
•Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets.
•Open. In open mode, the router inspects UDP packets only.
11.Click the Apply button.
Your settings are saved.
Use Auto Detect for an IPv6 Internet Connection
To set up an IPv6 Internet connection through autodetection:
1.Launch a web browser from a WiFi-enabled computer...

If you do not specify an ID here, the router generates one automatically from its MAC address.
8.Select an IPv6 Filtering radio button:
•Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets.
•Open. In open mode, the router inspects UDP packets only.
9.Click the Apply button.
Your settings are saved.
Set Up an IPv6 6to4 Tunnel Internet Connection
The remote relay router is the router to which your router creates a 6to4 tunnel. Make sure that the IPv4
Internet...

8.(Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the
IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC address.
9.Select an IPv6 Filtering radio button:
•Secured. In secured mode, which is the default mode, the router inspects both TCP and UDP packets.
•Open. In open mode, the router inspects UDP packets only.
10.Click the Apply button.
Your settings are saved.
Set Up an IPv6...