Netgear R7000p Nighthawk Smart Wifi Router With Mu Mimo User Manual

To connect a USB device:
1.Insert your USB storage drive into a USB port on the router.
The blue, USB 3.0 port on the front of the router performs faster than the USB 2.0 port on the rear panel
of the router.
2.If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the router.
When you connect the USB storage device to the router USB port, it might take up to two minutes before
it is ready for sharing. By default, the USB...

5.Right-click the USB device and select Map network drive.
6.Select the drive letter to map to the new network folder.
7.Click the Finish button.
The USB storage device is mapped to the drive letter that you specified.
8.To connect to the USB storage device as a different user, select the Connect using different credentials
check box, click the Finish button, and do the following:
a.Type the user name and password.
b.Click the OK button.
The USB storage device is mapped to the drive letter that you...

•Windows XP SP3
•Windows 7
•Windows 8
•Windows 8.1
•Windows 10
To back up your Windows computer:
1.Connect a USB HDD storage device to a USB port on the router.
2.If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the router.
When you connect the USB storage device to the router's USB port, it might take up to two minutes
before it is ready for sharing. By default, the USB storage device is available to all computers on...

9.Click the OK button.
10.Click the Apply button.
Your settings are saved.
Prepare to Back Up a Large Amount of Data
Before you back up a large amount of data with Time Machine, NETGEAR recommends that you follow this
procedure.
To prepare to back up a large amount of data:
1.Upgrade the operating system of the Mac computer.
2.Verify and repair the backup disk and the local disk.
3.Verify and repair the permissions on the local disk.
4.Set Energy Saver:
a.From the Apple menu, select System Preferences....

To back up your Mac onto a USB hard disk drive:
1.Prepare your USB device with a compatible format and partitions.
For more information, see Set Up a USB Hard Drive on a Mac on page 93.
2.If you plan to back up a large amount of data, see Prepare to Back Up a Large Amount of Data on page
94.
3.Connect your USB HDD to a USB port on the router.
If your USB HDD uses a power supply, you must use it when you connect the USB HDD to the router.
When you connect the USB HDD to the router, it might take up to two...

A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > USB Functions > ReadySHARE Storage.
The USB Storage (Advanced Settings) page displays.
5.Select the FTP check box.
6.Click the Apply button.
Your settings are saved.
View or Change Network Folders on a Storage Device
You can view or change the network folders on a storage device connected...

Your settings are saved.
Add a Network Folder on a USB Storage Device
You can add network folders on a USB storage device connected to a router USB port.
To add a network folder:
1.Launch a web browser from a computer or mobile device that is connected to the network.
2.Enter http://www.routerlogin.net.
A login window opens.
3.Enter the router user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays....

The BASIC Home page displays.
4.Select ADVANCED > USB Functions > ReadySHARE Storage.
The USB Storage (Advanced Settings) page displays.
5.In the Available Network Folders section, select the USB storage device.
6.Click the Edit button.
The Edit Network Folder window opens.
7.Change the settings in the fields as needed.
8.Click the Apply button.
Your settings are saved.
Set Up NETGEAR Downloader
NETGEAR Downloader is a download agent that runs on the router.You can use it to download files onto
a USB HDD...

9.Complete the fields presented for the option you choose.
10.Click the Add button.
The router begins the download.
11.To display the dowloading status, click the Refresh button.
12.Click the Apply button.
Your settings are saved.
13.(Optional) Use the Pause, Resume, and Delete buttons to manage the downloading tasks.
The completed downloading tasks display in the Downloaded Files section.
Change the NETGEAR Downloader Settings
You can change the default save path to any directory on the USB storage...

The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4.Select ADVANCED > NETGEAR Downloader (BETA) > Downloader Settings.
The NETGEAR Downloader Settigns page displays.
5.Click the Configure Email button.
The E-mail page displays.
6.Select the Send E-mail notifications when a downloader task is finished check box.
7.Click the Apply button.
Your settings are saved.
Manage NETGEAR Downloader Tasks
To manage NETGEAR Downloader...