Netgear R6300v2 Smart Wifi Router Ac1750 Dual Band Gigabit User Manual
Have a look at the manual Netgear R6300v2 Smart Wifi Router Ac1750 Dual Band Gigabit User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Supplemental Information 131 R6300v2 Smart WiFi Router Factory Settings You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the router for at least 7 seconds. The router resets, and returns to the factory configuration settings shown in the following table. Table 3. Factory default settings FeatureDefault behavior Router loginUser login URLwww.routerlogin.com or www.routerlogin.net User name (case-sensitive)admin Login password (case-sensitive)password Internet connectionWAN MAC addressUse default hardware address WAN MTU size1500 Port speedAutoSensing Local network (LAN)LAN IP192.168.1.1 Subnet mask255.255.255.0 DHCP serverEnabled DHCP range192.168.1.2 to 192.168.1.254 Allow a registrar to configure this routerEnabled DHCP starting IP address192.168.1.2 DHCP ending IP address192.168.1.254 DMZDisabled Time zoneGMT for WW except NA and GR, GMT+1 for GR, GMT-8 (Pacific time) for NA Time zone adjusted for daylight savings timeDisabled SNMPDisabled FirewallInbound (communications coming in from the Internet)Disabled (except traffic on port 80, the HTTP port) Outbound (communications going out to the Internet)Enabled (all) Source MAC filteringDisabled
Supplemental Information 132 R6300v2 Smart WiFi Router WirelessWireless communicationEnabled SSID nameSee router label SecurityWPA2-PSK (AES) Broadcast SSIDEnabled Transmission speedAuto* Country/regionUnited States in the US, otherwise varies by region RF channel6 until region selected Operating modeUp to 217 Mbps at 2.4 GHz, 1300 Mbps at 5 GHz FirewallInbound (communications coming in from the Internet)Disabled (bars all unsolicited requests) Outbound (communications going out to the Internet)Enabled (all) *. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Table 3. Factory default settings (continued) FeatureDefault behavior
Supplemental Information133 R6300v2 Smart WiFi Router Technical Specifications Table 4. R6300v2 Router specifications FeatureDescription Data and routing protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, Bigpond, Dynamic DNS, UPnP, and SMB Power adapter • North America: 120V, 60 Hz, input • UK, Australia: 240V, 50 Hz, input • Europe: 230V , 50 Hz, input • All regions (output): 12 VDC @ 2.5A, output Dimensions Dimensions: 1191 x 198.5 x 65 mm (7.5 x 7.79 x 2.55 in.) Weight Weight: 430 g (0.94 lbs) Operating temperature 0° to 40° C (32º to 104º F) Operating humidity 90% maximum relative humidity, noncondensing Electromagnetic emissions FCC Part 15 Class B VCCI Class B EN 55 022 (CISPR 22), Class B C-Tick N10947 LAN 10BASE-T or 100BASE-Tx or 1000BASE-T, RJ-45 WAN 10BASE-T or 100BASE-Tx or 1000BASE-T, RJ-45 Wireless Maximum wireless signal rate complies with the IEEE 802.11 standard. See the footnote for the previous table. Radio data rates Auto Rate Sensing Data encoding standards IEEE 802.11ac 2.0 IEEE 802.11n version 2.0 IEEE 802.11n, IEEE 802.11g, IEEE 802.11b 2.4 GHz IEEE 802.11n, IEEE 802.11a 5.0 GHz Maximum computers per wireless network Limited by the amount of wireless network traffic generated by each node (typically 50–70 nodes). Operating frequency range 2.4 GHz 2.412–2.462 GHz (US) 2.412–2.472 GHz (Japan) 2.412–2.472 GHz (Europe ETSI) 5 GHz 5.18–5.24 + 5.745–5.825 GHz (US) 5.18–5.24 GHz (Europe ETSI) CE (Europe ETSI): 5.25–5.35 GHz (DFS band) 5.47–5.725 GHz (DFS band) 802.11 security WPA-PSK, WPA2-PSK, and WPA/WPA2