Netgear R6300v2 Smart Wifi Router Ac1750 Dual Band Gigabit User Manual

							Advanced Settings 111
 R6300v2 Smart WiFi Router
•
Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) und\
er the IPv6 
address. If no address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
3.  Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
4.  (Optional) Select the Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router

’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
5.  Click the  Apply button.
IPv6 Auto Config
To set up an IPv6 Internet connection through auto configuration:
1. Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select Auto Config.
The screen adjusts:
The router automatically detects the information in the following fields\
: 
						

							Advanced Settings 
112 R6300v2 Smart WiFi Router 
•Router’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) under the IPv6 
address. If no address is acquired, the field displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.
3. (Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host 
name, enter it here.
4. (Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the 
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type 
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. 
(For example, Earthlink Cable might require a host name of home, and Comcast 
sometimes supplies a domain name.)
5. Specify how the router assigns IPv6 addresses to the devices on your home network (the 
LAN) by selecting one of the following radio buttons:
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
6. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
7. Click the Apply button.
IPv6 6to4 Tunnel
The remote relay router is the router to which your router creates the 6to4 tunnel. Make sure 
that the IPv4 Internet connection is working before you apply the 6to4 tunnel settings for the 
IPv6 connection.
To set up an IPv6 Internet connection by using a 6to4 tunnel:
1. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection Type list, select 6to4 Tunnel. 
						

							Advanced Settings 113
 R6300v2 Smart WiFi Router
The screen adjusts:
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) und\
er the IPv6 
address. If no address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
3.  Configure the remote 6to4 relay router settings by selecting one of the \
following buttons:
• Auto . 
Your router uses any remote relay router that is available on the Interne\
t. This 
is the default setting.
• Static IP 
 Address. Enter the static IPv4 address of the remote relay router. This 
address is usually provided by your IPv6 ISP.
4.  Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
5.  (Optional) Select the Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router

’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
6.  Click the  Apply button. 
						

							Advanced Settings 114
R6300v2 Smart WiFi Router 
IPv6 Pass Through
In pass-through mode, the router works as a Layer 2 Ethernet switch with\
 two ports (LAN and 
WAN Ethernet ports) for IPv6 packets. The router does not process any IPv6 header packets.
To set up a pass-through IPv6 Internet connection:
1. 
Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select Pass Through.
The screen adjusts, but no additional fields display.
3.  Click the  Apply button.
IPv6 Fixed
To set up a fixed IPv6 Internet connection:
1. Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select Fixed.
The screen adjusts:
3.  Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix 
 Length. The IPv6 address and prefix length of the router WAN 
interface.
• Default IPv6 Gateway . 
 The IPv6 address of the default IPv6 gateway for the router’s 
WAN interface.
• Primary DNS Server . 
 The primary DNS server that resolves IPv6 domain name 
records for the router. 
						

							Advanced Settings 115
 R6300v2 Smart WiFi Router
•
Secondary DNS Server . The secondary DNS server that resolves IPv6 domain 
name records for the router.
Note: If you do not specify the DNS servers, the router uses the DNS servers 
that are configured for the IPv4 Internet connection on the Internet 
Setup screen. (See Internet Setup on page  20.)
4.  Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
• Auto Config. 
 This is the default setting.
5.  In the IPv6 
 Address/Prefix Length fields, specify the static IPv6 address and prefix\
 length of 
the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
6.  Click the  Apply button.
IPv6 DHCP
To set up an IPv6 Internet connection with a DHCP server:
1. Select  ADV
 ANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2.  In the Internet Connection 
 Type list, select DHCP.
The screen adjusts:
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the  
						

							Advanced Settings 
116 R6300v2 Smart WiFi Router 
length of the prefix, which is also indicated by the underline (_) under the IPv6 
address. If no address is acquired, the field displays Not Available.
•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. If no address is 
acquired, the field displays Not Available.
3. (Optional) In the DHCP User Class (If Required) field, enter a host name.
Most people do not need to fill in this field, but if your ISP has given you a specific host 
name, enter it here.
4. (Optional) In the Domain Name (If Required) field, enter a domain name.
You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the 
IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type 
xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. 
(For example, Earthlink Cable might require a host name of home, and Comcast 
sometimes supplies a domain name.)
5. Specify how the router assigns IPv6 addresses to the devices on your home network (the 
LAN) by selecting one of the following radio buttons:
•Use DHCP Server. This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function.
•Auto Config. This is the default setting.
6. (Optional) Select the Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router’s LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC 
address.
7. Click the Apply button.
IPv6 PPPoE
To set up a PPPoE IPv6 Internet connection:
1. Select ADVANCED > Advanced Setup > IPv6.
The IPv6 screen displays.
2. In the Internet Connection Type list, select PPPoE. 
						

							Advanced Settings 117
 R6300v2 Smart WiFi Router
The screen adjusts: 
The router automatically detects the information in the following fields\
:
• Router
’s IPv6 Address on WAN. This field shows the IPv6 address that is acquired 
for the router’s WAN (or Internet) interface. The number after the slash (/) is the 
length of the prefix, which is also indicated by the underline (_) und\
er the IPv6 
address. If no address is acquired, the field displays Not Available.
• Router
’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired 
for the router’s LAN interface. The number after the slash (/) is the length of the prefix, 
which is also indicated by the underline (_) under the IPv6 address. I\
f no address is 
acquired, the field displays Not Available.
3.  In the Login field, enter the login information for the ISP connection.
This is usually the name that you use in your email address. For example\
, if your main  mail account is JerAB@ISP
 .com, then you would type JerAB in this field. Some ISPs (like 
Mindspring, Earthlink, and T-DSL) require that you use your full email address when you 
log in. If your ISP requires your full email address, type it in this fi\
eld.
4.  In the Password field, enter the password for the ISP connection.
5.  In the Service Name name field, enter a service name.
If your ISP did not provide a service name, leave this field blank.
Note: The default setting of the Connection Mode field is Always on to 
provide a steady IPv6 connection. The router never terminates the 
connection. If the connection is terminated, for example, when the 
modem is turned off, the router attempts to reestablish the connection 
immediately after the PPPoE connection becomes available again.
6.  Specify how the router assigns IPv6 addresses to the devices on your hom\
e network (the 
LAN) by selecting one of the following radio buttons:
• Use DHCP Server . 
 This method passes more information to LAN devices, but some 
IPv6 systems might not support the DHCv6 client function. 
						

							Advanced Settings 118
R6300v2 Smart WiFi Router 
•
Auto Config. This is the default setting.
7.  (Optional) Select the  Use This Interface ID check box, and specify the interface ID that you 
want to be used for the IPv6 address of the router
 ’s LAN interface.
If you do not specify an ID here, the router generates one automatically\
 from its MAC 
address.
8.  Click the  Apply button.
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic that passes through the 
router Internet port. You can set limits for traffic volume.
To monitor Internet traffic:
1.  Click  ADV
 ANCED > Advanced Setup > Traffic Meter .
Scroll to view 
more settings
2. Select the  Enable Traffic Meter  check box.
3.  (Optional) Control the volume of Internet traf
 fic.
You can use either the traffic volume control feature or the connection time control  feature.
• Select the T
 raffic volume control by radio button and then select one of the 
following options:
- No Limit. No restriction is applied when the traf
 fic limit is reached.
- Download only . 
 The restriction is applied to incoming traffic only.
- Both Directions. 
 The restriction is applied to both incoming and outgoing traffic.
• Select the Connection time control radio button and enter the allowed hours in the 
Monthly limit field. 
						

							Advanced Settings 
119  R6300v2 Smart WiFi Router
4. (Optional) If your ISP charges for extra data volume when you make a new connection, 
enter the extra data volume in MB in the Round up data volume for each connection by field.
5. In the Traffic Counter section, set the traffic counter to begin at a specific time and date.
If you want the traffic counter to start immediately, click the Restart Counter Now button.
6. In the Traffic Control section, specify whether the router should issue a warning message 
before the monthly limit of Mbytes or hours is reached. 
By default, the value is 0 and no warning message is issued. You can select one of the 
following to occur when the limit is attained:
•The Internet LED blinks green or amber. 
•The Internet connection is disconnected and disabled.
7. Click the Apply button.
The Internet Traffic Statistics section helps you to monitor the data traffic.
Click the Refresh button to update the Traffic Statistics section.
Click the Traffic Status button to display more information about the data traffic on your 
router and to change the poll interval. 
						

							120
10
10.   Troubleshooting
This chapter provides information to help you diagnose and solve problems you might have with 
your router. If you do not find the solution here, check the NETGEAR support site at 
http://support.netgear.com for product and contact information.
This chapter contains the following sections:
•Quick Tips 
•Troubleshoot with the LEDs 
•Cannot Log In to the Router 
•Cannot Access the Internet 
•Changes Not Saved 
•Wireless Connectivity 
•Troubleshoot Your Network Using the Ping Utility