Netgear R6100 Ac1200 Dual Band Wifi Router User Manual

Security61
 R6100 WiFi Router
The Block Services Setup screen displays:
5.
From the Service Type list, select the application or service to allow or block. 
The list displays several common services, but you are not limited to th\
ese choices. To  add any additional services or applications that do not already appear
 , select User 
Defined.
6. If you know that the application uses either 
 TCP or UDP, select the appropriate protocol. If 
you are not sure, select  TCP/UDB (both).
7. Enter the starting...

Security
62 R6100 WiFi Router 
2.Your IRC client composes a request message to an IRC server using a destination port 
number of 6667, the standard port number for an IRC server process. Your computer then 
sends this request message to your router.
3.Your router creates an entry in its internal session table describing this communication 
session between your computer and the IRC server. Your router stores the original 
information, performs Network Address Translation (NAT) on the source address and...

Security
63  R6100 WiFi Router
192.168.1.123.” The following sequence shows the effects of the port forwarding rule you 
have defined:
1.The user of a remote computer opens a browser and requests a web page from 
www.example.com, which resolves to the public IP address of your router. The remote 
computer composes a web page request message with the following destination 
information: 
•Destination address. The IP address of www.example.com, which is the address of 
your router.
•Destination port number....

Security64
R6100 WiFi Router 
Set Up Port Forwarding to Local Servers
The port forwarding feature lets you allow certain types of incoming tra\
ffic to reach servers on 
your local network. For example, you might want to make a local web serv\
er, FTP server, or 
game server visible and available to the Internet.
Use the Port Forwarding/Port Triggering screen to configure the router to forward specific 
incoming protocols to computers on your local network. In addition to se\
rvers for specific...

Security65
 R6100 WiFi Router
2.
Select the Port Forwarding radio button as the service type.
3. Click the  Add Custom Service button.
4.In the Service Name field, enter a descriptive name. 
5. In the Protocol field, select the protocol. If you are unsure, select  TCP/UDP.
6. In the External port range field, specify the port or port range. 
7. Either select the  Use the same port range for internal port check box or fill in the Internal 
IP address field.
8. Click the  Apply button. 
The service appears...

Security66
R6100 WiFi Router 
3.
(Optional) Register a host name with a Dynamic DNS service, and config\
ure your router to 
use the name. 
To access your web server from the Internet, a remote user has to know th\
e IP address  that your ISP assigned. However
 , if you use a Dynamic DNS service, the remote user can 
reach your server by a user-friendly Internet name, such as mynetgear.dyndns.org.
Set Up Port Triggering
Port triggering is a dynamic extension of port forwarding that is useful\
 in these...

Security67
 R6100 WiFi Router
If the Disable Port Triggering check box is selected after you configure port triggering, 
port triggering is disabled. However, any port triggering configuration information that you 
specified is saved even though it is not used.
4. In the Port 
 Triggering Timeout field, enter a value up to 9999 minutes. 
This value controls the inactivity timer for the designated inbound port\
s. The inbound  ports close when the inactivity time expires. 
 This is required because the...

Security68
R6100 WiFi Router 
Schedule Blocking
You can specify the days and time that you want to block Internet access.\
To schedule blocking:
1.
Select  ADV
 ANCED > Security > Schedule.
2.Set up the schedule for blocking keywords and services.
• Days to Block. Select days on which you want to apply blocking by selecting the 
appropriate check boxes, or select the Every Day  check box to select the check 
boxes for all days. 
• T
ime of Day to Block . Select a start and end time in 24-hour format,...

Security69
 R6100 WiFi Router
Security Event Email Notifications
To receive logs and alerts by email, provide your email information in th\
e E-mail screen, and 
specify which alerts you want to receive and how often. 
To set up email notifications:
1. Select  ADV
 ANCED > Security >  E-mail.
2. Select the Turn Email Notification On  check box.
3. In the 
Your Outgoing Mail Server field, enter the name of your ISP’s outgoing (SMTP) mail 
server (such as mail.myISP.com). 
You might be able to find this...

70
7
7.   Administration
Manage your network
This chapter describes the router settings for administering and maintaining your router and 
home network. 
This chapter includes the following sections:
•Upgrade the Router Firmware 
•View Router Status 
•Specify Logs Settings 
•Manage the Configuration File 
•Change the Password 
•Password Recovery 
For information about upgrading or checking the status of your router over the Internet, see 
Remote Management on page 92. For information about monitoring...