Netgear R6100 Ac1200 Dual Band Wifi Router User Manual

Advanced Home Settings31
 R6100 WiFi Router
NETGEAR genie Advanced Home Screen
The genie Advanced Home dashboard presents status information. The content is the same 
as what is on the Router Status screen on the Administration menu. The genie Advanced 
Home screen is shown in the following figure:
Internet Connection Setup Wizard
You can use the Setup Wizard to detect your Internet settings and automat\
ically set up your router. The Setup Wizard is not the same as the genie screens that display the f\...

Advanced Home Settings32
R6100 WiFi Router 
The Setup Wizard searches your Internet connection for servers and proto\
cols to 
determine your ISP configuration. 
WAN Setup
The WAN Setup screen lets you configure advanced settings for your Internet c\
onnection, and enable the router to respond to a ping on the WAN (Internet) port. 
To view or change the WAN settings:
1. Select  ADV
 ANCED > Setup > WAN Setup.
2. Specify the following settings:
• Disable Port Scan and DoS Protection. DoS protection...

Advanced Home Settings
33  R6100 WiFi Router
•Disable IGMP Proxying. IGMP proxying allows a computer on the local area network 
(LAN) to receive the multicast traffic it is interested in from the Internet. If you do not 
need this feature, you can select this check box to disable it.
•MTU Size (in bytes). The normal MTU (maximum transmit unit) value for most 
Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some 
ISPs, you might need to reduce the MTU. This is rarely required....

Advanced Home Settings
34 R6100 WiFi Router 
4.Click the Apply button.
Your change takes effect.
Change the MTU Size
The maximum transmission unit (MTU) is the largest data packet a network device transmits. 
When one network device communicates across the Internet with another, the data packets 
travel through many devices along the way. If a device in the data path has a lower MTU 
setting than the other devices, the data packets have to be split or “fragmented” to 
accommodate the device with the...

Advanced Home Settings
35  R6100 WiFi Router
To change the MTU size:
1.Select ADVANCED > Setup > WAN Setup. 
2.In the MTU Size field, enter a value from 64 to 1500.
3.Click the Apply button.
Your change is saved.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host 
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The router is shipped preconfigured to use private IP addresses on the LAN side and to act 
as a DHCP server. The router’s default...

Advanced Home Settings36
R6100 WiFi Router 
To change the LAN settings:
1.
Select  ADVANCED > Setup > LAN Setup .
2.Enter the settings that you want to customize. 
These settings are described in the following section, LAN Setup Screen Settings .
3. Click the  Apply button.
Your changes are saved.
LAN TCP/IP Setup
• IP Address. The LAN IP address of the router.
• IP Subnet Mask . 
 The LAN subnet mask of the router. Combined with the IP address, the 
IP subnet mask allows a device to know which other...

Advanced Home Settings
37  R6100 WiFi Router
Use Router as DHCP Server 
For most home networks, this check box is selected so that the router acts as a Dynamic 
Host Configuration Protocol (DHCP) server. 
•Starting IP Address. Specify the start of the range for the pool of IP addresses in the 
same subnet as the router.
•Ending IP Address. Specify the end of the range for the pool of IP addresses in the 
same subnet as the router.
Address Reservation
When you specify a reserved IP address for a computer...

Advanced Home Settings
38 R6100 WiFi Router 
3.Click the Apply button.
4.(Optional) If this service is disabled and no other DHCP server is on your network, set your 
computer IP addresses manually so that the can access the router.
Address Reservation
When you specify a reserved IP address for a computer on the LAN, that computer always 
receives the same IP address each time it accesses the router’s DHCP server. Assign 
reserved IP addresses to computers or servers that require permanent IP settings....

Advanced Home Settings39
 R6100 WiFi Router
The following screen lets you select the method for adding the WPS clien\
t (a wireless 
device or computer).
 
You can use either the push button or PIN method. 
3. Select the radio button for the setup method that you want to use. 
• Push button. Either click the  WPS button on this screen, or press the WPS button on 
the side of the router. Within two minutes, go to the wireless client an\
d press its  WPS 
button to join the network without entering a...

Advanced Home Settings40
R6100 WiFi Router 
not support WMM and applications that do not require QoS, are assigned t\
o the best effort 
category, which receives a lower priority than voice and video. WMM QoS is enabl\
ed by 
default.
To disable WMM QoS: 
1.
Select  ADV
 ANCED > Setup > QoS Setup. 
2.Clear the Enable WMM check box for the band (2.4 GHz or 5 GHz).
3. Click the  Apply button.
Set Up Bandwidth Control
To set up the maximum uplink bandwidth:
1.Select  ADV
 ANCED > Setup > QoS Setup....