Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual
Have a look at the manual Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 137 Netgear manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Customize Firewall Protection 240 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 The following table lists the menus that apply to an IPv4 DMZ WAN inbound rule. 9. Click the Apply button. Your settings are saved. The new rule is added to the Inbound Services table on the DMZ WAN Rules screen. Add an IPv6 DMZ WAN Inbound Rule The following procedure describes how to add an IPv6 DMZ WAN inbound rule. To add an IPv6 DMZ WAN inbound rule: 1. On your computer, launch an Internet browser. 2. In the address field of your browser, enter the IP address that was assigned to the VPN firewall during the installation process. The VPN firewall factory default IP address is 192.168.1.1. The NETGEAR Configuration Manager Login screen displays. 3. In the Username field, type your user name and in the Password / Passcode field, type your password. For the default administrative account, the default user name is admin and the default password is password. 4. If you changed the default domain or were assigned a domain, from the Domain menu, select the domain. If you did not change the domain or were not assigned a domain, leave the menu selection at geardomain. 5. Click the Login button. Menus that apply to all IPv4 DMZ WAN inbound rulesMenus that apply only when your selection from the Action menu is not BLOCK always Service Select Schedule Note:This menu is available only when the selection from the Action menu includes by schedule. Action Send to DMZ Server WAN Destination IP Address Translate to Port Number DMZ Users Note:This menu is available only when the WAN mode is Classical Routing. When the WAN mode is NAT, your network presents only one IP address to the Internet.QoS Profile WAN Users Log
Customize Firewall Protection 241 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 The Router Status screen displays. 6. Select Security > Firewall > DMZ WAN Rules. The DMZ WAN Rule screen displays the IPv4 settings. 7. In the upper right, select the IPv6 radio button. The DMZ WAN Rule screen displays the IPv6 settings. 8. Under the Outbound Services table, click the Add button. The Add DMZ WAN Inbound Service screen for IPv6 displays. 9. Make your selections from the menus and enter the settings. For more information about the menus and settings, see Settings for Inbound Rules on page 217.
Customize Firewall Protection 242 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 The following table lists the menus that apply to an IPv6 DMZ WAN inbound rule. 10. Click the Apply button. Your settings are saved. The new rule is added to the Inbound Services table on the DMZ WAN Rules screen. Add LAN DMZ Rules The following sections provide information about managing LAN DMZ rules: •Add LAN DMZ Outbound Service Rules •Add LAN DMZ Inbound Service Rules Add LAN DMZ Outbound Service Rules For LAN DMZ traffic, the default outbound policy is to block all traffic to the DMZ. You can change the default policy by adding LAN DMZ firewall rules that allow specific types of traffic to go out from the LAN to the DMZ. Alternately, you can allow all outbound traffic and then block only specific services from passing through the VPN firewall. You can allow or block access based on the service or application, source or destination IP addresses, and time of day. The following sections provide information about adding LAN DMZ outbound service rules: •Add an IPv4 LAN DMZ Outbound Rule •Add an IPv6 LAN DMZ Outbound Rule Add an IPv4 LAN DMZ Outbound Rule The following procedure describes how to add an IPv4 LAN DMZ outbound rule. Menus that apply to all IPv6 DMZ WAN inbound rulesMenus that apply only when your selection from the Action menu is not BLOCK always Service Select Schedule Note:This menu is available only when the selection from the Action menu includes by schedule. Action DMZ Users WAN Users Log
Customize Firewall Protection 243 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 To add an IPv4 LAN DMZ outbound rule: 1. On your computer, launch an Internet browser. 2. In the address field of your browser, enter the IP address that was assigned to the VPN firewall during the installation process. The VPN firewall factory default IP address is 192.168.1.1. The NETGEAR Configuration Manager Login screen displays. 3. In the Username field, type your user name and in the Password / Passcode field, type your password. For the default administrative account, the default user name is admin and the default password is password. 4. If you changed the default domain or were assigned a domain, from the Domain menu, select the domain. If you did not change the domain or were not assigned a domain, leave the menu selection at geardomain. 5. Click the Login button. The Router Status screen displays. 6. Select Security > Firewall > LAN DMZ Rules. The LAN DMZ Rules screen displays the IPv4 settings. 7. Under the Outbound Services table, click the Add button. The Add LAN DMZ Outbound Service screen for IPv4 displays.
Customize Firewall Protection 244 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 8. Make your selections from the menus and enter the settings. For more information about the menus and settings, see Settings for Outbound Rules on page 212. The following table lists the menus that apply to an IPv4 LAN DMZ outbound rule. 9. Click the Apply button. Your settings are saved. The new rule is added to the Outbound Services table on the LAN DMZ Rules screen. Add an IPv6 LAN DMZ Outbound Rule The following procedure describes how to add an IPv6 LAN DMZ outbound rule. To add an IPv6 LAN DMZ outbound rule: 1. On your computer, launch an Internet browser. 2. In the address field of your browser, enter the IP address that was assigned to the VPN firewall during the installation process. The VPN firewall factory default IP address is 192.168.1.1. Menus that apply to all IPv4 LAN DMZ outbound rulesMenus that apply only when your selection from the Action menu is not BLOCK always Service Select Schedule Note:This menu is available only when the selection from the Action menu includes by schedule. Action LAN Users DMZ Users Log
Customize Firewall Protection 245 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 The NETGEAR Configuration Manager Login screen displays. 3. In the Username field, type your user name and in the Password / Passcode field, type your password. For the default administrative account, the default user name is admin and the default password is password. 4. If you changed the default domain or were assigned a domain, from the Domain menu, select the domain. If you did not change the domain or were not assigned a domain, leave the menu selection at geardomain. 5. Click the Login button. The Router Status screen displays. 6. Select Security > Firewall > LAN DMZ Rules. The LAN DMZ Rules screen displays the IPv4 settings. 7. In the upper right, select the IPv6 radio button. The LAN DMZ Rules screen displays the IPv6 settings. 8. Under the Outbound Services table, click the Add button. The Add LAN DMZ Outbound Service screen for IPv6 displays.
Customize Firewall Protection 246 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 9. Make your selections from the menus and enter the settings. For more information about the menus and settings, see Settings for Outbound Rules on page 212. The following table lists the menus that apply to an IPv6 LAN DMZ outbound rule. 10. Click the Apply button. Your settings are saved. The new rule is added to the Outbound Services table on the LAN DMZ Rules screen. Add LAN DMZ Inbound Service Rules For LAN DMZ traffic, the inbound default policy is to block all traffic to the LAN. You can change the default policy by adding LAN DMZ firewall rules that allow specific types of traffic to come in from the DMZ to the LAN. You can allow access based on the service or application, source or destination IP addresses, and time of day. Menus that apply to all IPv6 LAN DMZ outbound rulesMenus that apply only when your selection from the Action menu is not BLOCK always Service Select Schedule Note:This menu is available only when the selection from the Action menu includes by schedule. Action LAN Users DMZ Users Log
Customize Firewall Protection 247 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 The following sections provide information about adding LAN DMZ inbound service rules: •Add an IPv4 LAN DMZ Inbound Rule •Add an IPv6 LAN DMZ Inbound Rule Add an IPv4 LAN DMZ Inbound Rule The following procedure describes how to add an IPv4 LAN DMZ inbound rule. To add an IPv4 LAN DMZ inbound rule: 1. On your computer, launch an Internet browser. 2. In the address field of your browser, enter the IP address that was assigned to the VPN firewall during the installation process. The VPN firewall factory default IP address is 192.168.1.1. The NETGEAR Configuration Manager Login screen displays. 3. In the Username field, type your user name and in the Password / Passcode field, type your password. For the default administrative account, the default user name is admin and the default password is password. 4. If you changed the default domain or were assigned a domain, from the Domain menu, select the domain. If you did not change the domain or were not assigned a domain, leave the menu selection at geardomain. 5. Click the Login button. The Router Status screen displays. 6. Select Security > Firewall > LAN DMZ Rules. The LAN DMZ Rules screen displays the IPv4 settings.
Customize Firewall Protection 248 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 7. Under the Inbound Services table, click the Add button. The Add LAN DMZ Inbound Service screen for IPv4 displays. 8. Make your selections from the menus and enter the settings. For more information about the menus and settings, see Settings for Inbound Rules on page 217. The following table lists the menus that apply to an IPv4 LAN DMZ inbound rule. 9. Click the Apply button. Your settings are saved. The new rule is added to the Inbound Services table on the LAN DMZ Rules screen. Add an IPv6 LAN DMZ Inbound Rule The following procedure describes how to add an IPv6 LAN DMZ inbound rule. To add an IPv6 LAN DMZ inbound rule: 1. On your computer, launch an Internet browser. Menus that apply to all IPv4 LAN DMZ inbound rulesMenus that apply only when your selection from the Action menu is not BLOCK always Service Select Schedule Note:This menu is available only when the selection from the Action menu includes by schedule. Action LAN Users DMZ Users Log
Customize Firewall Protection 249 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 2. In the address field of your browser, enter the IP address that was assigned to the VPN firewall during the installation process. The VPN firewall factory default IP address is 192.168.1.1. The NETGEAR Configuration Manager Login screen displays. 3. In the Username field, type your user name and in the Password / Passcode field, type your password. For the default administrative account, the default user name is admin and the default password is password. 4. If you changed the default domain or were assigned a domain, from the Domain menu, select the domain. If you did not change the domain or were not assigned a domain, leave the menu selection at geardomain. 5. Click the Login button. The Router Status screen displays. 6. Select Security > Firewall > LAN DMZ Rules. The LAN DMZ Rules screen displays the IPv4 settings. 7. In the upper right, select the IPv6 radio button. The LAN DMZ Rules screen displays the IPv6 settings. 8. Under the Inbound Services table, click the Add button. The Add LAN DMZ Inbound Service screen for IPv6 displays.