Home > Netgear > Router > Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Here you can view all the pages of manual Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual. The Netgear manuals for Router are available online for free. You can easily download all the documents as PDF.

Page 651

 System Logs and Error Messages
649  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
•PPTP idle time-out logs
•PPP authentication logs
Table 26.  System logs: WAN status, PPTP idle time-out 
Message Nov 29 11:19:02 [FVS336Gv2] [pppd] Starting connection
Nov 29 11:19:05 [FVS336Gv2] [pppd] CHAP authentication succeeded
Nov 29 11:19:05 [FVS336Gv2] [pppd] local IP address 192.168.200.214
Nov 29 11:19:05 [FVS336Gv2] [pppd] remote IP address 192.168.200.1
Nov 29 11:19:05 [FVS336Gv2] [pppd] primary DNS...

Page 652

 System Logs and Error Messages
650 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Resolved DNS Names
This section describes the logs of DNS name resolution messages.
VPN Log Messages
This section explains logs that are generated by IPSec VPN and SSL VPN policies. These 
logs are generated automatically and do not need to be enabled.
•IPSec VPN Logs 
•SSL VPN Logs 
IPSec VPN Logs
This section describes the log messages generated by IPSec VPN policies.
Note:The same IPSec VPN log messages can...

Page 653

 System Logs and Error Messages
651  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Table 29.  System logs: IPSec VPN tunnel, tunnel establishment 
Messages 1 through 5
Messages 6 and 7 
 
Messages 8 through 19
 
 
Messages 20 and 21 
 2000 Jan 1 04:01:39 [FVS336Gv2] [wand] [IPSEC] IPSEC Restarted
2000 Jan 1 04:02:09 [FVS336Gv2] [wand] [FW] Firewall Restarted
2000 Jan 1 04:02:29 [FVS336Gv2] [IKE] IKE stopped_
2000 Jan 1 04:02:31 [FVS336Gv2] [IKE] IKE started_
2000 Jan 1 04:02:31 [FVS336Gv2]...

Page 654

 System Logs and Error Messages
652 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
 
Recommended action None
Table 30.  System logs: IPSec VPN tunnel, SA lifetime (150 sec in phase 1;                          300 sec in phase 2), VPN tunnel is reestablished 
Message 1 
Messages 2 through 6 
 
 
 
Message 7 
Messages 8 through 11 
 
 
 2000 Jan 1 04:32:25 [FVS336Gv2] [IKE] Sending Informational Exchange: delete 
payload[]_
2000 Jan 1 04:32:25 [FVS336Gv2] [IKE] purged IPSec-SA proto_id=ESP spi=...

Page 655

 System Logs and Error Messages
653  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
  
Table 31.  System logs: IPSec VPN tunnel, SA lifetime (150 sec in phase 1;                          300 sec in phase 2), VPN tunnel not reestablished 
Message 2000 Jan 1 04:52:33 [FVS336Gv2] [IKE] Using IPSec SA configuration: 
192.168.11.0/24192.168.10.0/24_
2000 Jan 1 04:52:33 [FVS336Gv2] [IKE] Configuration found for 20.0.0.1._
2000 Jan 1 04:52:59 [FVS336Gv2] [IKE] Phase 1 negotiation failed due to time up...

Page 656

 System Logs and Error Messages
654 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
 
Table 33.  System logs: IPSec VPN tunnel, Dead Peer Detection and keep-alive 
                         (default 30 sec), VPN tunnel torn down 
Message 1 
 
Message 2 
Message 32000 Jan 1 06:01:18 [FVS336Gv2] [VPNKA] Keep alive to peer 192.168.10.2 
failed 3 consecutive times and 5 times cumulative_
2000 Jan 1 06:01:19 [FVS336Gv2] [IKE] DPD R-U-THERE sent to 
20.0.0.1[500]_
2000 Jan 1 06:01:19 [FVS336Gv2] [IKE]...

Page 657

 System Logs and Error Messages
655  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
SSL VPN Logs
This section describes the log messages that are generated by SSL VPN policies.
Table 35.  System logs: IPSec VPN tunnel, client policy behind a NAT device 
 
 
Message 3 
 
 
Message 62000 Jan 1 01:54:21 [FVS336Gv2] [IKE] Floating ports for NAT-T with peer 
20.0.0.1[4500]_
2000 Jan 1 01:54:21 [FVS336Gv2] [IKE] NAT-D payload matches for 
20.0.0.2[4500]_
2000 Jan 1 01:54:21 [FVS336Gv2] [IKE] NAT-D...

Page 658

 System Logs and Error Messages
656 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
Traffic Meter Logs
Routing Logs
The following sections provide information about routing log messages:
•LAN to WAN Logs
•LAN to DMZ Logs
•DMZ to WAN Logs
•WAN to LAN Logs
•DMZ to LAN Logs
•WAN to DMZ Logs
These sections explain the logging messages for the various network segments (such as 
LAN to WAN) for
  debugging purposes. These logs might generate a significant volume of 
messages.
Table 38.  System logs:...

Page 659

 System Logs and Error Messages
657  ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
LAN to WAN Logs
LAN to DMZ Logs
DMZ to WAN Logs
WAN to LAN Logs
Table 40.  Routing logs: LAN to WAN 
Message Nov 29 09:19:43 [FVS336Gv2] [kernel] LAN2WAN[ACCEPT] IN=LAN OUT=WAN 
SRC=192.168.10.10 DST=72.14.207.99 PROTO=ICMP TYPE=8 CODE=0
Explanation
• This packet from LAN to WAN is allowed by the firewall.
• For other settings, see Table 13 on page 642.
Recommended action None
Table 41.  Routing logs: LAN to DMZ...

Page 660

 System Logs and Error Messages
658 ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2 
DMZ to LAN Logs
WAN to DMZ Logs
Other Event Logs
The following sections provide information about other event messages:
•Session Limit Logs
•Source MAC Filter Logs
•Bandwidth Limit Logs
These sections describe the log messages generated by other events such source MAC 
filtering, session limiting, and bandwidth limiting. For information about how to select these 
logs, see 
Manage Logging, Alerts, and Event...
Start reading Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

Related Manuals for Netgear Netgar VPN FIrewall FVS336Gv2 Reference Manual

All Netgear manuals