Netgear Dgn 2200 M Manual

Advanced Configuration81
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Use Router as DHCP Server
If another device on your network will be the DHCP server, or if you wil\
l manually configure 
the network settings of all of your computers, clear the 
Use Router as DHCP Server check 
box. Otherwise, leave it selected. 
Specify the pool of IP addresses to be assigned by setting the starting \
IP address and ending 
IP address. These addresses should be part of the same IP address subnet\
 as...

Advanced Configuration82
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
Note:  The reserved address will not be assigned until the next time the 
computer contacts the router’s DHCP server. Reboot the computer 
or access its IP configuration and force a DHCP release and renew.
To edit or delete a reserved address entry: 
1. Select the radio button next to the reserved address that you want to ed\
it or delete. 
2.  Click  Edit or  Delete. 
Set Up Quality of Service (QoS)
Quality of Service...

Advanced Configuration83
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
2. 
Click  Setup QoS rule. The QoS Priority Rule list displays:
3. To change a rule, select its radio button, and scroll down to the bottom\
 of the screen:
4. To edit a rule, click Edit. To add a custom rule, click  Add Priority Rule, and enter the 
requested information on the screen that displays.
5.  Click  Apply  to save this rule to the QoS Policy list and return to the QoS Setup scr\
een.
6.  In the QoS Setup...

Advanced Configuration84
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
Advanced Wireless Settings
From the main menu, under the Advanced heading, select Wireless Settings:
Restrict Wireless Access to Your Network
By default, any wireless computer that is configured with the correct SS\
ID can access your 
wireless network. For increased security, the wireless modem router prov\
ides several ways to 
restrict wireless access to your network. 
You can do the following:
•     Turn off wireless...

Advanced Configuration85
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Hide Your Wireless Network Name (SSID)
By default, the wireless modem router is set to broadcast its wireless n\
etwork name (SSID). 
You can restrict wireless access to your network by not broadcasting the\
 wireless network 
name (SSID). To do this, clear the 
Allow Broadcast of Name (SSID) check box on the 
Wireless Settings screen, and then click Apply. Wireless devices will not “see” your wireless 
modem router. You...

Advanced Configuration86
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
•     You can type in the MAC address for the wireless computer or device. The\
 MAC 
address is usually printed on the wireless card, or on the label of a wi\
reless device. It 
might appear in the wireless modem router’s DHCP table. The MAC addre\
ss is 
12  hexadecimal digits.
•     You can copy and paste the MAC addresses from the wireless modem router’\
s  Attached Devices screen into the MAC Address field of this...

Advanced Configuration87
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
•     Disable Router’s PIN. Only when the wireless modem router’s PIN is enabled can 
you configure the wireless modem router’s wireless settings or add a \
wireless client 
through WPS with the wireless modem router’s PIN number. If the wirel\
ess modem 
router detects suspicious attempts to access the network with a PIN, the\
 PIN function 
might be disabled temporarily. You can manually enable the PIN function \
by...

Advanced Configuration88
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
•     
The  Destination IP Address  and IP Subnet Mask  fields specify that this static route applies 
to all 134.177.x.x addresses. 
•     The Gateway IP Address  field specifies that all traffic for these addresses should be 
forwarded to the ISDN router at 192.168.0.100. 
•      The value in the Metric  field represents the number of routers between your network and 
the destination. This is a direct connection, so it...

Advanced Configuration89
 N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
7. 
Enter the IP subnet mask for this destination. If the destination is a s\
ingle host, type 
255.255.255.255. 
8.  Enter the gateway IP address, which needs to be a router on the same LAN\
 segment as the 
router. 
9.  Enter a number between 2 and 15 in the Metric field. This represents the\
 number of routers 
between your network and the destination. Usually, a setting of 2 or 3 w\
orks. 
10.  Click  Apply . The...

Advanced Configuration90
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition 
1440 minutes. The default period is 30 minutes. Shorter durations ensure\
 that control 
points have current device status at the expense of additional network t\
raffic. Longer 
durations might compromise the freshness of the device status but can si\
gnificantly 
reduce network traffic.
•     Advertisement Time to Live . The time to live for the advertisement is measured in 
hops (steps) for each UPnP packet sent. Hops...