Netgear D6200 Wifi Dsl Modem Router User Manual

Advanced Settings 121
 D6200 WiFi DSL Modem Router
To set up Dynamic DNS:
1. 
Select  ADV
 ANCED> Advanced Setup > Dynamic DNS .
2. Register for an account with one of the Dynamic DNS service providers wh\
ose URLs 
appear in the Service Provider list.
3.  Select the Use a Dynamic DNS Service  check box. 
4.  Select the URL of your Dynamic DNS service provider
 . 
For example, for DynDNS.org, select www
 .dyndns.org.
5.  T
ype the host name (or domain name) that your Dynamic DNS service provi\
der gave...

Advanced Settings 122
D6200 WiFi DSL Modem Router 
•
You have an ISDN WiFi DSL modem router on your home network for connectin\
g to the 
company where you are employed. This WiFi DSL modem router’s address on your LAN 
is 192.168.1.100.
• Y
our company’s network address is 134.177.0.0.
When you first configured your WiFi DSL modem router, two implicit stati\
c routes were 
created. 

A default route was created with your ISP as the gateway, and a second static route 
was created to your local network...

Advanced Settings 123
 D6200 WiFi DSL Modem Router
2. 
Click  Add.
3. In the Route Name field, type a name for this static route (for identif\
ication purposes only.) 
4.  (Optional) Select the Private check box if you want to limit access to the LAN only
 . 
If Private is selected, the static route is not reported in RIP. 
5.  Select the  Active check box.
6.  T
ype the IP address of the final destination. 
7. T
ype the IP subnet mask for this destination.
If the destination is a single host, type...

Advanced Settings 124
D6200 WiFi DSL Modem Router 
Remote Management
The remote management feature lets you upgrade or check the status of yo\
ur WiFi DSL 
modem router over the Internet.
Note:
Be sure to change the WiFi DSL modem router’s default login 
password to a secure password. The ideal password should contain 
no dictionary words from any language and contain uppercase and 
lowercase letters, numbers, and symbols. It can be up to 30 
characters. For more information, see Set Password on page...

Advanced Settings 
125  D6200 WiFi DSL Modem Router
•To allow access from a range of IP addresses on the Internet, select IP Address 
Range. Enter a beginning and ending IP address to define the allowed range. 
•To allow access from a list of specific IP addresses on the Internet, select IP Address 
List. Enter the IP addresses that are allowed access.
•To allow access from any IP address on the Internet, select Everyone. 
4. Specify the port number for accessing the web management interface.
Normal web...

Advanced Settings 126
D6200 WiFi DSL Modem Router 
Universal Plug and Play
Universal Plug and Play (UPnP) helps devices, such as Internet applian\
ces and computers, 
to access the network and connect to other devices as needed. UPnP devic\
es can 
automatically discover the services from other registered UPnP devices o\
n the network.
Note:
If you use applications such as multiplayer gaming, peer-to-peer 
connections, or real-time communications such as instant messaging 
or remote assistance (a feature...

Advanced Settings 127
 D6200 WiFi DSL Modem Router
•
Advertisement Time to Live.  The time to live for the advertisement is measured in 
hops (steps) for each UPnP packet sent. The time to live hop count is the number of 
steps a broadcast packet is allowed to propagate for each UPnP advertise\
ment 
before it disappears. The number of hops can range from 1 to 255. The default value 
for the advertisement time to live is 4 hops, which should be fine for m\
ost home 
networks. If you notice that some...

Advanced Settings 128
D6200 WiFi DSL Modem Router 
•
If your Internet connection does not use PPPoE, DHCP, or fixed, but is IPv6, then 
select IPv6 auto config.
3.  Click  Apply .
Traffic Meter
Traffic metering allows you to monitor the volume of Internet traffic passing through your WiFi 
DSL modem router’s Internet port. With the traffic meter utility, you can set limits for traffic 
volume, set a monthly limit, and get a live update of traffic usage.
To monitor Internet traffic:
1.  Click  ADV
 ANCED...

Advanced Settings 
129  D6200 WiFi DSL Modem Router
7. Set the traffic counter to begin at a specific time and date.
8. Set up traffic control to issue a warning message before the monthly limit of Mbytes or hours 
is reached. 
You can select one of the following to occur when the limit is attained:
•The Internet LED blinks green or amber. 
•The Internet connection is disconnected and disabled.
9. Set up Internet traffic statistics to monitor the data traffic.
10. Click the Traffic Status button.
You get...

Advanced Settings 130
D6200 WiFi DSL Modem Router 
Device Mode
When the WiFi DSL modem router is in Router mode, this screen allows swi\
tching to Modem 
mode, where the WiFi DSL modem router acts as a pure bridge or DSL modem\
.
Routing, firewall, wireless support, USB, and the traffic meter are not available in Modem 
mode. 

A typical application is a small-to-medium business scenario where the W\
iFi DSL 
modem router is used for DSL connectivity behind a carrier class router \
or firewall or...