NEC Projector V311w User Manual
Have a look at the manual NEC Projector V311w User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 86
76
5. Using On-Screen Menu
\fFORMAT]](http://img.usermanuals.tech/thumb/54/92493/w64_nec-v311w-manual_d-85.png "Page 86
76
5. Using On-Screen Menu
\fFORMAT]")
![Page 87
77
5. Using On-Screen Menu
❼ Menu \fescriptions \c& Functions [INFO.]\c](http://img.usermanuals.tech/thumb/54/92493/w64_nec-v311w-manual_d-86.png "Page 87
77
5. Using On-Screen Menu
❼ Menu \fescriptions \c& Functions [INFO.]\c")
![Page 88
78
5. Using On-Screen Menu
\fSOURCE 1]](http://img.usermanuals.tech/thumb/54/92493/w64_nec-v311w-manual_d-87.png "Page 88
78
5. Using On-Screen Menu
\fSOURCE 1]")
![Page 89
79
5. Using On-Screen Menu
❽ Menu \fescriptions \c& Functions [RESET]\c
Returning to Factory Default \fRESET]](http://img.usermanuals.tech/thumb/54/92493/w64_nec-v311w-manual_d-88.png "Page 89
79
5. Using On-Screen Menu
❽ Menu \fescriptions \c& Functions [RESET]\c
Returning to Factory Default \fRESET]")
![Page 93
83
6. Maintenance
5. Connect the suppli\Sed power cord, and turn on the p\Srojector.
6. Finally, select the menu → [RESE\b] → [CLEAR LAMP \fOURS]\S to reset the lamp\S usage hours.
NOTE: When you continue to use the projector for another 100 hours after the \bamp has reached the end of its \bife, the projector
cannot turn on and the menu is not disp\bayed.
If this happens, press the HELP button on the remote contro\b for 10 seconds to reset the \bamp c\bock back to zero.
When the...](http://img.usermanuals.tech/thumb/54/92493/w64_nec-v311w-manual_d-92.png "Page 93
83
6. Maintenance
5. Connect the suppli\Sed power cord, and turn on the p\Srojector.
6. Finally, select the menu → [RESE\b] → [CLEAR LAMP \fOURS]\S to reset the lamp\S usage hours.
NOTE: When you continue to use the projector for another 100 hours after the \bamp has reached the end of its \bife, the projector
cannot turn on and the menu is not disp\bayed.
If this happens, press the HELP button on the remote contro\b for 10 seconds to reset the \bamp c\bock back to zero.
When the...")
82 6. Maintenance 2. Remove the lamp housin\Sg. (1) Loosen the three scre ws secur ing the lamp housing until the phillips scre wdriver goes into a free wheeling condi- tion. • The three screws are not removable. • There is an inter lock on this case to pre vent the r isk of electr ical shoc k. Do not attempt to circumv ent this interlock. (2) Remove the lamp housing by holding it. CAUTION:
83 6. Maintenance 5. Connect the suppli\Sed power cord, and turn on the p\Srojector. 6. Finally, select the menu → [RESE\b] → [CLEAR LAMP \fOURS]\S to reset the lamp\S usage hours. NOTE: When you continue to use the projector for another 100 hours after the \bamp has reached the end of its \bife, the projector cannot turn on and the menu is not disp\bayed. If this happens, press the HELP button on the remote contro\b for 10 seconds to reset the \bamp c\bock back to zero. When the \bamp time c\bock is reset to zero, the LAMP indicator goes out. 4. Reattach the lamp cover. (1) Slide the lamp cover back until it snaps into place. (2) Tighten the screw to secure the lamp cover. • Be sure to tighten the screw. 3. Install a new lamp housing. (1) Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION
86 7. Appendix If there is no pict\vure, or the picture is n\vot displayed correctly. • P
89 7. Appendix 310 (12.2)96 (3.8) 247 (9.7) 68.4 (2.7) 95 (3.7) ❸ Cabinet \fimensions\c Lens center Lens center
90 7. Appendix ❹ Pin Assignments o\cf \f-Sub COMPUTER In\cput Connector Mini \f-Sub 15 Pin C\connector