NEC Projector V302X User Manual

							74English ...
User Controls
 INFORMATION
To display the projector information for model no., serial number, 
source, resolution, and software version on the screen.
COMPUTER
SCREENIMAGESETTINGOPTIONSINFORMATIONADVANCED
MODEL NO.SERIAL NUMBERSOURCERESOLUTIONSOFTWARE VERSION
SELECTEXITMOVEMOVECOMPUTER
CONTROL IDOPTIONS | 
INFORMATION 
						

							75... English
User Controls
SCREENIMAGESETTINGOPTIONSINFORMATIONADVANCED
STANDBY MODEDIRECT POWER ONAUTO POWER OFF (MIN)OFF TIMER (MIN)CONTROL PANEL LOCK
NORMAL
COMPUTERSELECTEXITMOVEMOVE
OFF
OFF
CONTROL ID
 STANDBY MODE
NETWORK STANDBY:   Choose “NETWORK STANDBY” to 
save power dissipation further < 0.5W.
 NORMAL:  Choose “NORMAL” to return to normal standby. 
STANDBY MODE
NORMALNETWORK STANDBY
  DIRECT POWER ON
Choose “ON” to activate Direct Power mode. The projector will 
automatically power on when AC power is supplied, without 
pressing the  button on the projector control panel or the 
POWER ON button on the remote control.
DIRECT POWER ON
OFF
ON
	Network Standby mode will disable the following connectors, buttons or functions when the projector is in standby:
-   AUDIO OUT connector
-  LAN and Mail Alert functions
-  Buttons other than POWER button on the cabinet
-  Buttons other than POWER ON button on the remote control
-  PC Control connector
-  Virtual Remote 
Tool, PC Control Utility Pro 4/PC Control Utility Pro 5.
OPTIONS | 
ADVANCED 
						

							76English ...
User Controls
 AUTO POWER OFF (MIN)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
AUTO POWER OFF (MIN)
EXIT ADJUST
EXIT
  OFF TIMER (MIN)
Sets the countdown timer interval. The countdown timer will start, 
with or without a signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
OFF TIMER (MIN)
EXIT ADJUST
EXIT
  CONTROL PANEL LOCK
When the keypad lock function is “ON”, the control panel will be locked however, the projector can be operated by the remote control. By selecting “OFF”, you will be able to reuse the control panel. Press and hold the EXIT button on the projector cabinet for about 10 seconds to turn off “CONTROL PANEL LOCK”.
Even when “NORMAL” mode is selected for “STANDBY MODE” and “ON” is selected for “CONTROL PANEL LOCK”, the 
POWER button on the cabinet can be used to turn on the power. 
CONTROL PANEL LOCK
OFFON 
						

							77... English
User Controls
 CONTROL ID
Use this feature to display the ID number of the projector when 
the "ID SET" button is pressed on the remote control.
CONTROL ID
EXITMOVE
SELECT
CONTROL ID NUMBER
CONTROL ID OFF
CONTROL ID NUMBER
ADJUST
EXIT EXIT
CONTROL ID (ACTIVE)
ADJUST
EXIT EXIT
CONTROL ID
OFF
ON
CONTROL ID WILL BE ENABLED
ARE YOU SURE ?
YES NO
CONTROL IDCONTROL ID IS DISABLED !
CONTROL ID NUMBER 
						

							78English ...
Appendices
Problem: No image appears on screen
  Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
  Check if the projection lamp has been securely installed. Please 
refer to the “Replacing the lamp” section.
  Make sure the projector is switched on.
  Ensure that the “AV-MUTE” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
  Press “AUTO ADJ.” on the remote control.
 If you are using a PC:
 For Windows Vista:
  1.   From the “My Computer” icon, open the “Control Panel” folder, 
and double click the “Appearance and Personalization”
  2. Select “Personalization”
 3.  Click “Adjust screen resolution” to display “Display Settings”. 
Click on the “Advanced Settings”.
 For Windows 7:
  1.   From “Start” menu, open “Control Panel”.
  2. From drop-down menu select “Display”.
 3.  Click “Adjust resolution”.
  If the projector is still not projecting the whole image, you will 
also need to change the monitor display you are using. Refer to 
the following steps.
  4.   Verify the resolution setting is less than or equal to 1280 x 1024 
resolution.
Troubleshooting
  If you experience trouble with the projector, refer to the 
following information. If the problem persists, please contact 
your local dealer or service center. 
						

							79... English
Appendices
 5.   Select the “Change” under the “Monitor” tab .
  6.   Click on “Show all devices”. Next, select “Standard monitor 
types” under the SP box; choose the resolution mode you need 
under the “Models” box. 
 If you are using a Notebook:
  1.   First, follow the steps above to adjust resolution of the 
computer.
  2.   Press the toggle output settings. A combination of function 
keys will enable/disable the external display. Usually, the 
combination of the “Fn” key along with one of the 12 function 
keys gets the external display to come on or off.  For example, 
NEC notebook PCs use Fn + F3, While Dell notebook PCs use 
Fn + F8 key combination to toggle through external display 
selection.
   If you experience difficulty changing resolutions or your monitor 
freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook 
computer is not displaying a presentation
 If you are using a Notebook PC:
    Some Notebook PCs may deactivate their own screens when a 
second display device is in use. Each has a different way to be 
reactivated.  Refer to your computer’s documentation for detailed 
information.
Problem: Image is unstable or flickering
  Adjust the “PHASE” to correct it. Refer to the “SETTING” section 
for more information.
  Change the monitor color setting from your computer.
Problem: Image has vertical flickering bar
 Use “CLOCK” to make an adjustment.
   Check and reconfigure the display mode of your graphic card to 
make it compatible with the product.  
						

							80English ...
Appendices
Problem: Image is out of focus
 Adjust the Focus Lever on the projector lens. 
   Make sure the projection screen is between the required distance 
from the projector. Please see the pages 32-33). 
Problem: The image is stretched when displaying 16:9 DVD
 
The projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
 
If the image is still stretched, you will also need to adjust the aspect 
ratio by referring to the following:
  Please select 4:3 aspect ratio type on your DVD player if you are 
playing a 16:9 DVD.
  If you can’t select 4:3 aspect ratio type on your DVD player, 
please select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
   Select “SETTING|GENERAL-->ORIENTATION” from the OSD 
and adjust the projection direction.
Problem: Lamp burns out or makes a popping sound
   When the lamp reaches its end of life, it will burn out and may 
make a loud popping sound.  If this happens, the projector will 
not turn on until the lamp module has been replaced. To replace 
the lamp, follow the procedures in the “Replacing the Lamp”. 
						

							81... English
Appendices
Problem: LED Indicator message
POWER LED Indicator
Indicator ConditionProjector ConditionNote
OffThe main power is off.Without connecting power cable.
Blinking lightGREEN0.5sec ON / 0.5sec OFFThe projector is getting ready to turn on.--
GREEN2.5sec ON / 0.5sec OFFOff Timer is working.--
ORANGE0.5sec ON / 0.5sec OFFCooling--
Steady lightGREENPower on mode--
ORANGENetwork Standby modeConnecting power cable.
REDNormal Standby modeConnecting power cable.
STATUS LED Indicator
Indicator ConditionProjector ConditionNote
OffNormal Condition--
Blinking lightRED2cycle
(0.5sec ON / 0.5sec OFF)
Temperature error--
3cycle
(0.5sec ON / 0.5sec OFF)
Power errorPower unit is not working properly. Contact your dealer.
4cycle
(0.5sec ON / 0.5sec OFF)
Fan error--
6cycle
(0.5sec ON / 0.5sec OFF)
Lamp error--
GREEN0.5sec ON / 0.5sec OFFRe-firing the lamp 
(The projector is cooling down)--
Steady lightORANGEControl Panel Lock is workingYou have pressed cabinet button when Control Panel Lock is on.
CONTROL ID errorRemote control ID and projector ID are not matched. 
						

							82English ...
Appendices
LAMP LED Indicator
Indicator ConditionProjector ConditionNote
OffNormal Condition--
Blinking lightRED0.5sec ON / 0.5sec OFFLamp has reached its end of life. --
Steady lightREDLamp has been used beyond its limit.The projector will not turn on until  the lamp is replaced.
GREEN[ECO MODE] is set to [ECO] 
						

							83... English
Appendices
Problem: Message Reminders
  Over temperature - the projector has exceeded its recommended 
operating temperature and must be allowed to cool down before it 
may be used.
WARNING! TEMPERATURE TOO HIGH
1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C
  Replacing the lamp - the lamp is about to reach its maximum 
lifetime. Prepare to replace it soon. 
WARNING! LAMP
LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!
WARNING! LAMP
LAMP WARNING
LAMP LIFE EXCEEDED.
 
NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector cannot turn on.
If this happens, after replacing the lamp, connect the power cord and then press and hold the HELP button on the remote control at least 10 seconds. This will allow you to turn on the projector. Clear the lamp hours by selecting “OPTIONS” -> “LAMP SETTINGS” -> 
“CLEAR LAMP HOURS” from the menu. 
 Fan failed - the system fan is not working.
WARNING! FAN LOCKED
THE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.