NEC Projector V302X User Manual

							4English ...
Introduction
Product Features
■ High resolution   
Full HD (1920 x 1080) support. 
■ 0.5 W in standby condition with energy saving technology  
Selecting [NORMAL] for [STANDBY MODE] from the menu can put the projector in power-saving mode that consumes 
only 0.5 W (typical value).
■ Two HDMI input ports provide digital signal  
The two HDMI inputs provide HDCP compatible digital 
signals. The HDMI input also supports audio signal.
■ Quick Power Off, Direct Power Off  
The projector can be put away immediately after the projector 
is powered on. No cool down period is required after the 
projector is turned off from the remote control or cabinet 
control panel.  
The projector has a feature called “Direct Power Off”. This 
feature allows the projector to be turned off (even when 
projecting an image) by using the Main Power Switch or 
disconnecting the AC power supply. To turn off the AC power 
supply when the projector is powered on, use a power strip 
equipped with a switch and a breaker.
■ 8 W speaker for an integrated audio solution  
Powerful 8 watt stereo speakers provide volume need for 
large rooms.
■ 3D features supported  
The projector can support following format by DLP® Link. 
- HDMI 3D  
- HQFS 3D
 ■ Integrated RJ-45 connector for wired networking capability  
The customer can control the projector by own computer via 
Wired LAN. 
■ Preventing unauthorized use of the projector  
Enhanced smart security settings for keyword protection, 
cabinet control panel lock, security slot, and security chain 
opening to help prevent unauthorized access, adjustments and 
theft deterrence.   
						

							5... English
Introduction
Power Cord x1
Remote Control(P/N:7N901052)Projector
Package Overview
This projector comes with all the items shown below. Check 
to make sure your unit is completed. Contact your dealer 
immediately if anything is missing.
	Due to the difference in applications for each country, some regions may have different accessories.
Documentation: 
		NEC Projector CD-ROM
			(P/N: 7M952171)
		Quick Setup Guide  (P/N: 7N8N5831)
		Important Information (For North America: 7N8N5811) (For Other countries than North America: 7N8N5811   and 7N8N5821)
Batteries (AAAx2)
For North America:
	Limited Warranty
For Europe:
		Guarantee Policy For customers in Europe:You will find our current valid Guarantee Policy on our Web Site:www.nec-display-solutions.com
Lens Cap(79TCB121)
Security Label
Computer Cable (VGA)(P/N:7N520087)US (P/N: 79TC5021)EU (P/N: 79TC5031) 
						

							6English ...
Introduction
1. Exhaust Vent
2. Focus Ring
3. Control Panel
4. Zoom Lever
5. Intake Vent
6. Security Lock Hunger 
7. Remote Control Sensor
8. Lens
Projector
Product Overview
9. Tilt Foot 
       Release Button
10. Lens Cap
11. Ports
12. Tilt Foot
13. KensingtonTM Lock Port
14. Monaural Speaker (8W)
15. Lamp Cover
234
5
1
6
7
8
9
11
12
13
10
14
15 
						

							7... English
Introduction
Ports
1. SERVICE Port (for service purpose only)
2. LAN Port (RJ-45)
3. HDMI 2 IN Port
4. HDMI 1/MHL IN or 
       HDMI 1 Port
5. COMPUTER IN Port
6. MONITOR OUT Port (separate
       sync signal only)
7. PC CONTROL Port
8. VIDEO IN Port
9. AUDIO IN L/R Port
10. AUDIO IN Jack (3.5mm
       mini jack)
11. KensingtonTM Lock  Port
12. AUDIO OUT Port  
(This port does not support 
Headphone terminal)
13. AC IN Terminal
1
11
102345678
13
NP-V332X/NP-V332W/NP-V302H
12
9
1
11
102345678
13
NP-V302X/NP-V302W
12
9 
						

							8English ...
Introduction
Control Panel
NP-V332X/NP-V332W/NP-V302H
NP-V302X/NP-V302W
10
10
24
5
6789
13
12
1011
1124
5
6789
13
12         
						

							9... English
Introduction
1VOLUME -Decrease speaker volume.
2
Four  
Directional 
Select Keys -Use  ,  ,  or  to select items 
or make adjustments to your 
selection.
-Use as Quick Keys. Please see the 
page 13.
3
VOLUME +Increase speaker volume.
4 LAMP LED Indicate the projector’s lamp 
status.
5 STATUS LED Indicate the projector’s various  
status.
6 POWER LED Indicate the projector’s status.
7
POWER Turn the projector on/off. 
Refer to the “Power On/Off the 
Projector” section on pages 29-30.
8 EXIT Press to exit the OSD menu.
9 SOURCE Press “SOURCE” to select an 
input signal.
10 MENU Press “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation.
11
KEYSTONE
Correction Adjust the image to compensate 
for distortion caused by tilting the 
projector (vertical ± 40 degrees).
12 ENTER Confirm your section of items in 
sub menu operation.
	For controlling the 
speaker volume, use 
 
or  .
	NP-V322X, NP-332W, and NP-V302H 
also support horizontal 
keystone correction.  
Use 
 button for adjusting horizontal 
keystone.  
						

							10English ...
Introduction
Remote Control
1POWER ONPower on the projector. Please 
see the “Power On/Off the 
Projector” section on pages 29-
30.
2POWER OFFPower off the projector. Please 
see the “Power On/Off the 
Projector” section on pages 29-
30.
345
18
10
11
13
19
24
26
28
30
27
12
1162
823
21
9
25
14
29
31
17
15
67
20
22 
						

							11... English
Introduction
3COMPUTER  1Press “1” to choose Computer IN 
connector.
4COMPUTER  2 No function.
5HDMI  1Press “4” to choose HDMI 1/
MHL IN connector (*1) or 
HDMI1 connector (*2).
6VIDEOPress “VIDEO” to choose VIDEO  
IN connector.
7USB  ANo function.
8ID SETPress ID SET for indicating the 
ID number.
9AV-MUTEMomentarily turn off/on the 
audio and video.
10MENUPress “MENU” to launch the 
Onscreen display (OSD), back to 
the top level of OSD for the OSD 
main menu operation
11D-ZOOMZoom in/out the projected 
image. 
12KEYSTONE  
Correction
Adjust the image to compensate 
for distortion caused by tilting 
the projector.
13ECODim the projector lamp which 
will lower power consumption 
and extend the lamp life. Please 
see the page 72.
14HELPThis function ensures easy setup 
and operation.
15FOCUS/
ZOOM
No function.
16SOURCEPress “SOURCE” to select the 
desired input source.
17AUTO ADJ.Automatically synchronize the 
projector to the input source.
	*1: Supported in NP-V332X, NP-V332W, and NP-V302H models.
	*2: Supported in NP-V302X and NP-V302W models. 
						

							12English ...
Introduction
18HDMI  2Press “5” to choose HDMI 2 IN 
connector.
19DISPLAY 
PORT
No function.
20USB  BNo function.
21Number ButtonNo function.
22LANNo function.
23CLEARClear the password while you 
input the password.
24FREEZEFreeze To pause the screen 
image. Press again to resume the 
screen image.
25EXITExit the settings.
26ENTERConfirm your section of items in 
sub menu operation.
27Four  
Directional 
Select Buttons
-Use  or  or  or  to select 
items or make adjustments to 
your selection. When the image 
is magnified by using the D-
ZOOM + button, the  ,  ,  or 
 button moves the image. 
- Use as Quick Keys. Please see 
the page 13.
28PAGENo function.
29PICTURE 
Mode
Select the Picture mode from 
PRESENTATION, HIGH-
BRIGHT, VIDEO, MOVIE, sRGB, 
BLACKBOARD, USER1, and 
USER2.
30VOL. +/-Increase/decrease speaker 
volume.
31ASPECTUse this function to choose your 
desired aspect ratio. Please see 
the page 49.
	When the demagnified image is displayed, the   ,  ,  or  button is not available to move the image. 
						

							13... English
Introduction
Quick Key Activate Behavior
Quick keys are available when no OSD is displayed.
The Quick Keys can be accessed on Control Panel or remote control      
(). 
The behavior of the Quick Keys is as described in the following tables.
NP-V302X/NP-V302W
Quick KeyFunctionActivate Condition
LEFT ()/
RIGHT ()Pop Volume OSD and allow user to adjust.
No OSD Display.
UP ()/ DOWN ()
Pop Vertical Keystone OSD and allow user 
to adjust.
NP-V332X,/NP-V332W/NP-V302H
Quick KeyFunctionActivate Condition
LEFT ()/
RIGHT ()Pop Volume OSD and allow user to adjust.
No OSD Display.
UP ()No function.
DOWN ()
Pop Hrizontal + Vertical Keystone OSD allow user to choose adjust horizontal or 
vertical keystone. Use the  button on the control panel or the KEYSTONE button on the remote control