NEC Projector V302X User Manual

74English ...
User Controls
 INFORMATION
To display the projector information for model no., serial number, 
source, resolution, and software version on the screen.
COMPUTER
SCREENIMAGESETTINGOPTIONSINFORMATIONADVANCED
MODEL NO.SERIAL NUMBERSOURCERESOLUTIONSOFTWARE VERSION
SELECTEXITMOVEMOVECOMPUTER
CONTROL IDOPTIONS | 
INFORMATION 

75... English
User Controls
SCREENIMAGESETTINGOPTIONSINFORMATIONADVANCED
STANDBY MODEDIRECT POWER ONAUTO POWER OFF (MIN)OFF TIMER (MIN)CONTROL PANEL LOCK
NORMAL
COMPUTERSELECTEXITMOVEMOVE
OFF
OFF
CONTROL ID
 STANDBY MODE
NETWORK STANDBY:   Choose “NETWORK STANDBY” to 
save power dissipation further < 0.5W.
 NORMAL:  Choose “NORMAL” to return to normal standby. 
STANDBY MODE
NORMALNETWORK STANDBY
  DIRECT POWER ON
Choose “ON” to activate Direct Power mode. The projector will 
automatically power on when...

76English ...
User Controls
 AUTO POWER OFF (MIN)
Sets the countdown timer interval. The countdown timer will start, 
when there is no signal being sent to the projector. The projector 
will automatically power off when the countdown has finished (in 
minutes).
AUTO POWER OFF (MIN)
EXIT ADJUST
EXIT
  OFF TIMER (MIN)
Sets the countdown timer interval. The countdown timer will start, 
with or without a signal being sent to the projector. The projector 
will automatically power off when the countdown has...

77... English
User Controls
 CONTROL ID
Use this feature to display the ID number of the projector when 
the "ID SET" button is pressed on the remote control.
CONTROL ID
EXITMOVE
SELECT
CONTROL ID NUMBER
CONTROL ID OFF
CONTROL ID NUMBER
ADJUST
EXIT EXIT
CONTROL ID (ACTIVE)
ADJUST
EXIT EXIT
CONTROL ID
OFF
ON
CONTROL ID WILL BE ENABLED
ARE YOU SURE ?
YES NO
CONTROL IDCONTROL ID IS DISABLED !
CONTROL ID NUMBER 

78English ...
Appendices
Problem: No image appears on screen
  Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
 Ensure the pins of connectors are not crooked or broken.
  Check if the projection lamp has been securely installed. Please 
refer to the “Replacing the lamp” section.
  Make sure the projector is switched on.
  Ensure that the “AV-MUTE” feature is not turned on.
Problem: Partial, scrolling or incorrectly...

79... English
Appendices
 5.   Select the “Change” under the “Monitor” tab .
  6.   Click on “Show all devices”. Next, select “Standard monitor 
types” under the SP box; choose the resolution mode you need 
under the “Models” box. 
 If you are using a Notebook:
  1.   First, follow the steps above to adjust resolution of the 
computer.
  2.   Press the toggle output settings. A combination of function 
keys will enable/disable the external display. Usually, the 
combination of the “Fn” key along with...

80English ...
Appendices
Problem: Image is out of focus
 Adjust the Focus Lever on the projector lens. 
   Make sure the projection screen is between the required distance 
from the projector. Please see the pages 32-33). 
Problem: The image is stretched when displaying 16:9 DVD
 
The projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
 
If the image is still stretched, you will also need to adjust the aspect 
ratio by referring...

81... English
Appendices
Problem: LED Indicator message
POWER LED Indicator
Indicator ConditionProjector ConditionNote
OffThe main power is off.Without connecting power cable.
Blinking lightGREEN0.5sec ON / 0.5sec OFFThe projector is getting ready to turn on.--
GREEN2.5sec ON / 0.5sec OFFOff Timer is working.--
ORANGE0.5sec ON / 0.5sec OFFCooling--
Steady lightGREENPower on mode--
ORANGENetwork Standby modeConnecting power cable.
REDNormal Standby modeConnecting power cable.
STATUS LED Indicator...

82English ...
Appendices
LAMP LED Indicator
Indicator ConditionProjector ConditionNote
OffNormal Condition--
Blinking lightRED0.5sec ON / 0.5sec OFFLamp has reached its end of life. --
Steady lightREDLamp has been used beyond its limit.The projector will not turn on until  the lamp is replaced.
GREEN[ECO MODE] is set to [ECO] 

83... English
Appendices
Problem: Message Reminders
  Over temperature - the projector has exceeded its recommended 
operating temperature and must be allowed to cool down before it 
may be used.
WARNING! TEMPERATURE TOO HIGH
1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.
2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C
  Replacing the lamp - the lamp is about to reach its maximum 
lifetime. Prepare to replace it soon. 
WARNING! LAMP
LAMP WARNING
LAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!...