NEC Projector UM352W User Manual
Here you can view all the pages of manual NEC Projector UM352W User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 31
19 Adjusting the tilt (Tilt foot) Adjusting the left and right tilt. 1. Rotate the tilt foot to adjust the left and right tilt. The tilt foot is equipped at the left and the right front bottom of the projector. If the projected image is tilted, rotate one of the tilt foot to adjust the angle to project. If keystone distortion is appeared, adjust it either by the ▼ button on the cabinet or keystone button on the remote control NOTE: • Do not extend the tilt foot beyond its height limit (18...
Page 32
![Page 32
20
Adjusting the size [Digital Zoom]
Use the remote control to finely adjust the size of the image.
1. Press the FOCUS/ZOOM button on the remote control.
The DIGITAL ZOOM bar will be displayed.
2. Press the ◀ or ▶ button to finely zoom in or out.
3. After completing the adjustment, press the ENTER button.
The DIGITAL ZOOM bar will be closed.
NOTE:
• This feature allows you to electronically fine adjust the image size on the
screen
• This feature can not be used when [USB-B] is selected as a...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-31.png "Page 32
20
Adjusting the size [Digital Zoom]
Use the remote control to finely adjust the size of the image.
1. Press the FOCUS/ZOOM button on the remote control.
The DIGITAL ZOOM bar will be displayed.
2. Press the ◀ or ▶ button to finely zoom in or out.
3. After completing the adjustment, press the ENTER button.
The DIGITAL ZOOM bar will be closed.
NOTE:
• This feature allows you to electronically fine adjust the image size on the
screen
• This feature can not be used when [USB-B] is selected as a...")
20 Adjusting the size [Digital Zoom] Use the remote control to finely adjust the size of the image. 1. Press the FOCUS/ZOOM button on the remote control. The DIGITAL ZOOM bar will be displayed. 2. Press the ◀ or ▶ button to finely zoom in or out. 3. After completing the adjustment, press the ENTER button. The DIGITAL ZOOM bar will be closed. NOTE: • This feature allows you to electronically fine adjust the image size on the screen • This feature can not be used when [USB-B] is selected as a...
Page 33
![Page 33
21
❻ Correcting Keystone Distortion [KEYSTONE]
When the projector is not ex actly pe rpendicular to th e sc reen, ke ystone di stortion oc curs. To ov ercome it , yo u ca n us e th e
“Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp , square image.
The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions .
When the projector is placed diagonally to the screen,
When the projector is set...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-32.png "Page 33
21
❻ Correcting Keystone Distortion [KEYSTONE]
When the projector is not ex actly pe rpendicular to th e sc reen, ke ystone di stortion oc curs. To ov ercome it , yo u ca n us e th e
“Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp , square image.
The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions .
When the projector is placed diagonally to the screen,
When the projector is set...")
21 ❻ Correcting Keystone Distortion [KEYSTONE] When the projector is not ex actly pe rpendicular to th e sc reen, ke ystone di stortion oc curs. To ov ercome it , yo u ca n us e th e “Keystone” function, a digital technology that can adjust for keystone-type distortion, resulting in a crisp , square image. The following procedure explains how to use the [KEYSTONE] screen from the menu to correct trapezoidal distortions . When the projector is placed diagonally to the screen, When the projector is set...
Page 34
![Page 34
22
4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then
use the ◀ or ▶ so that the top and bottom sides of the projected
image are parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distortion.
6. After completing Keystone correction, press the EXIT b utton.
The Keystone screen will disappear.
• To perform Keystone co rrection ag ain, pr ess th e ▼ button to display
the Keystone screen and repeat above steps 1 to 6.
To return the keystone...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-33.png "Page 34
22
4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then
use the ◀ or ▶ so that the top and bottom sides of the projected
image are parallel.
• Adjust the horizontal keystone distortion.
5. Repeat steps 2 and 4 to correct keystone distortion.
6. After completing Keystone correction, press the EXIT b utton.
The Keystone screen will disappear.
• To perform Keystone co rrection ag ain, pr ess th e ▼ button to display
the Keystone screen and repeat above steps 1 to 6.
To return the keystone...")
22 4. Press the ▲ button to select [KEYSTONE HORIZONTAL] and then use the ◀ or ▶ so that the top and bottom sides of the projected image are parallel. • Adjust the horizontal keystone distortion. 5. Repeat steps 2 and 4 to correct keystone distortion. 6. After completing Keystone correction, press the EXIT b utton. The Keystone screen will disappear. • To perform Keystone co rrection ag ain, pr ess th e ▼ button to display the Keystone screen and repeat above steps 1 to 6. To return the keystone...
Page 35
![Page 35
23
❼ Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button to optimiz e a computer image automatically .
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL],...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-34.png "Page 35
23
❼ Optimizing Computer Signal Automatically
Adjusting the Image Using Auto Adjust
Optimizing a computer image automatically. (COMPUTER)
Press the AUTO ADJ. button to optimiz e a computer image automatically .
This adjustment may be necessary when you connect your computer for the first time.
[Poor picture]
[Normal picture]
NOTE:
Some signals may take time to display or may not be displayed correctly.
• If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL],...")
23 ❼ Optimizing Computer Signal Automatically Adjusting the Image Using Auto Adjust Optimizing a computer image automatically. (COMPUTER) Press the AUTO ADJ. button to optimiz e a computer image automatically . This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE: Some signals may take time to display or may not be displayed correctly. • If the Auto Adjust operation cannot optimize the computer signal, try to adjust [HORIZONTAL],...
Page 36
![Page 36
24
❾ Turning off the Projector
To turn off the projector:
1. First, press the (POWER) button on the projector
cabinet or the STANDBY button on the remote control.
The confirmation message will be displayed.
2. Secondly, press the ENTER button or press the
(POWER) or the STANDBY button again.
The lamp will turn off and the projector will go into standb y
mode. When in standby mode, the POWER indicator will
light red and the STATUS indicator will turn off when [NOR-
MAL] is selected for [STANDBY...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-35.png "Page 36
24
❾ Turning off the Projector
To turn off the projector:
1. First, press the (POWER) button on the projector
cabinet or the STANDBY button on the remote control.
The confirmation message will be displayed.
2. Secondly, press the ENTER button or press the
(POWER) or the STANDBY button again.
The lamp will turn off and the projector will go into standb y
mode. When in standby mode, the POWER indicator will
light red and the STATUS indicator will turn off when [NOR-
MAL] is selected for [STANDBY...")
24 ❾ Turning off the Projector To turn off the projector: 1. First, press the (POWER) button on the projector cabinet or the STANDBY button on the remote control. The confirmation message will be displayed. 2. Secondly, press the ENTER button or press the (POWER) or the STANDBY button again. The lamp will turn off and the projector will go into standb y mode. When in standby mode, the POWER indicator will light red and the STATUS indicator will turn off when [NOR- MAL] is selected for [STANDBY...
Page 37
25 ❿ When Moving the Projector Preparation: Make sure that the projector is turned off . 1. Remove the cable cover. (→ page 5) 2. Unplug the power cord. 3. Disconnect any other cab les. • Remove the USB memory or the wireless LAN Unit if it is inserted into the projector. (→ page 86) 2. Projecting an Image (Basic Operation)
Page 38
26 ❶ Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. The projector’s power-saving function will work 10 seconds after the image is turned off. As a result, the lamp power will be reduced. NOTE: • Even though the image is turned off, the menu still remains on the screen. • Sound from the AUDIO OUT jack (Stereo mini) can be turned off. • Even when the power-saving function works, the lamp...
Page 39
27 Saving the projected screen images temporarily on the build-in memory/Screen Capture Once the FREEZE button is pressed, the Screen Capture menu is indicated at the left bottom of the screen. If no operation is performed for 3 seconds, the menu will disappear and a picture will freeze. CAPTURE & INTERACTIVE WHITEBOARD Capture the projected screen image and boot up the inter- activ e whiteboard. FREEZE A picture will freeze by press. Press again to resume mo- tion. CAPTURE Temporarily save the...
Page 40
![Page 40
28
❸ Magnifying a Picture
You can enlarge the picture up to four times.
NOTE:
• The maximum magnification may be less than four times depending on the signal.
• This feature can not be used when [USB-B] is selected as the input terminal.
To do so:
1. Press the D-ZOOM (+) button to magnify the picture.
To move the magnified image, use the ▲,▼,◀ or ▶ button.
2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (− ) bu tton is...](http://img.usermanuals.tech/thumb/54/100026/w300_projector_manual_8887_d-39.png "Page 40
28
❸ Magnifying a Picture
You can enlarge the picture up to four times.
NOTE:
• The maximum magnification may be less than four times depending on the signal.
• This feature can not be used when [USB-B] is selected as the input terminal.
To do so:
1. Press the D-ZOOM (+) button to magnify the picture.
To move the magnified image, use the ▲,▼,◀ or ▶ button.
2. Press the ▲▼◀▶ button.
The area of the magnified image will be moved
3. Press the D-ZOOM (−) button.
Each time the D-ZOOM (− ) bu tton is...")
28 ❸ Magnifying a Picture You can enlarge the picture up to four times. NOTE: • The maximum magnification may be less than four times depending on the signal. • This feature can not be used when [USB-B] is selected as the input terminal. To do so: 1. Press the D-ZOOM (+) button to magnify the picture. To move the magnified image, use the ▲,▼,◀ or ▶ button. 2. Press the ▲▼◀▶ button. The area of the magnified image will be moved 3. Press the D-ZOOM (−) button. Each time the D-ZOOM (− ) bu tton is...