NEC Projector PX803UL User Manual
Here you can view all the pages of manual NEC Projector PX803UL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 121
104 TIP: The horizontal position and vertical position are the amount of movement from the reference points. For example, when TOP-LEFT is adjusted, the position is displayed with the same amount of movement even if displayed with other starting positions. The maximum amount of movement is half the resolution of the projector. Reference point Adjust using the hor izon- tal position Sub-displa y Main displa y Reference point Adjust using the v ertical position T OP-LEFT TOP-RIGHT BOTTOM-LEFT...
Page 122
![Page 122
105
[GEOMETRIC CORRECTION]
KEYSTONE
Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen.
To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the
on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the 3D REFORM
button on the remote control.
HORIZONTAL ���������Adjustments when projecting from a diagonal direction to the
screen�
VERTICAL ��������������Adjustments when projecting...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-121.png "Page 122
105
[GEOMETRIC CORRECTION]
KEYSTONE
Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen.
To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the
on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the 3D REFORM
button on the remote control.
HORIZONTAL ���������Adjustments when projecting from a diagonal direction to the
screen�
VERTICAL ��������������Adjustments when projecting...")
105 [GEOMETRIC CORRECTION] KEYSTONE Display the trapezoid correction screen and adjust the trapezoidal distortion of the projection screen. To display the [KEYSTONE] screen, select → [DISPLAY] → [GEOMETRIC CORRECTION] → [KEYSTONE] in the on-screen menu. The [GEOMETRIC CORRECTION] screen can also be displayed by pressing the 3D REFORM button on the remote control. HORIZONTAL ���������Adjustments when projecting from a diagonal direction to the screen� VERTICAL ��������������Adjustments when projecting...
Page 123
![Page 123
106
CORNERSTONE
Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen.
Please refer to “Correcting Horizontal and Ver tical Ke ystone Distortion [CORNERSTONE]” (→ page 42) for details
on the operation.
HORIZONTAL CORNER/VERTICAL CORNER
Distortion correction for corner projection such as wall surfaces.
HORIZONTAL CORNER
������������������������������Performs correction for projection onto a wall lying at an angle to the hor\
izontal direction�
* Reverse...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-122.png "Page 123
106
CORNERSTONE
Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen.
Please refer to “Correcting Horizontal and Ver tical Ke ystone Distortion [CORNERSTONE]” (→ page 42) for details
on the operation.
HORIZONTAL CORNER/VERTICAL CORNER
Distortion correction for corner projection such as wall surfaces.
HORIZONTAL CORNER
������������������������������Performs correction for projection onto a wall lying at an angle to the hor\
izontal direction�
* Reverse...")
106 CORNERSTONE Display the 4-point correction screen and adjust the trapezoidal distortion of the projection screen. Please refer to “Correcting Horizontal and Ver tical Ke ystone Distortion [CORNERSTONE]” (→ page 42) for details on the operation. HORIZONTAL CORNER/VERTICAL CORNER Distortion correction for corner projection such as wall surfaces. HORIZONTAL CORNER ������������������������������Performs correction for projection onto a wall lying at an angle to the hor\ izontal direction� * Reverse...
Page 124
![Page 124
107
Adjustment method
1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORREC-
TION] menu and then press the ENTER button.
• The adjustment screen will be displayed.
2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press
the ENTER button.
• The cursor will change into an adjustment point (yellow in color).
3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button.
•...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-123.png "Page 124
107
Adjustment method
1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORREC-
TION] menu and then press the ENTER button.
• The adjustment screen will be displayed.
2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press
the ENTER button.
• The cursor will change into an adjustment point (yellow in color).
3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button.
•...")
107 Adjustment method 1. Align the cursor with the [HORIZONTAL CORNER] or [VERTICAL CORNER] of the [GEOMETRIC CORREC- TION] menu and then press the ENTER button. • The adjustment screen will be displayed. 2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button. • The cursor will change into an adjustment point (yellow in color). 3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button. •...
Page 125
108 PINCUSHION Adjust the curve distortion of the projection screen. TOP ������������������������Adjust the curve distortion of the upper edge of the projection screen� BOTTOM ����������������Adjust the curve distortion of the lower edge of the projection screen� LEFT ����������������������Adjust the curve distortion of the left edge of the projection screen� RIGHT ��������������������Adjust the curve distortion of the right edge of the projection screen� TOP LEFT RIGHT BOTTOM PC TOOL (For future...
Page 126
![Page 126
109
[EDGE BLENDING]
This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combina-
tion of several projectors in the up, down, left and right positions.
MODE
This enables or disables the EDGE BLENDING function.
When MODE is set to ON, the TOP, BO TTOM, LEFT , RIGHT and BLA CK LEVEL settings can be adjusted.
TOP/BOTTOM/LEFT/RIGHT
This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen.
The following settings can be...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-125.png "Page 126
109
[EDGE BLENDING]
This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combina-
tion of several projectors in the up, down, left and right positions.
MODE
This enables or disables the EDGE BLENDING function.
When MODE is set to ON, the TOP, BO TTOM, LEFT , RIGHT and BLA CK LEVEL settings can be adjusted.
TOP/BOTTOM/LEFT/RIGHT
This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen.
The following settings can be...")
109 [EDGE BLENDING] This adjusts the edges (boundaries) of the projection screen when projecting high resolution videos using a combina- tion of several projectors in the up, down, left and right positions. MODE This enables or disables the EDGE BLENDING function. When MODE is set to ON, the TOP, BO TTOM, LEFT , RIGHT and BLA CK LEVEL settings can be adjusted. TOP/BOTTOM/LEFT/RIGHT This selects the EDGE BLENDING locations on the left, right, top and bottom on the screen. The following settings can be...
Page 127
![Page 127
110
[MULTI SCREEN]
WHITE BALANCE
This adjusts the white balance for each projector when projecting using a combination of several projectors.
This can be adjusted when [MODE] is set to [ON].
BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B
������������������������������Adjusting the black color of the video�
CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B
������������������������������Adjusting the white color of the video�
PICTURE SETTING
This sets the division condition when projecting using a...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-126.png "Page 127
110
[MULTI SCREEN]
WHITE BALANCE
This adjusts the white balance for each projector when projecting using a combination of several projectors.
This can be adjusted when [MODE] is set to [ON].
BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B
������������������������������Adjusting the black color of the video�
CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B
������������������������������Adjusting the white color of the video�
PICTURE SETTING
This sets the division condition when projecting using a...")
110 [MULTI SCREEN] WHITE BALANCE This adjusts the white balance for each projector when projecting using a combination of several projectors. This can be adjusted when [MODE] is set to [ON]. BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B ������������������������������Adjusting the black color of the video� CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B ������������������������������Adjusting the white color of the video� PICTURE SETTING This sets the division condition when projecting using a...
Page 128
111 Conditions for using tiling • All the projectors need to fulfil the following conditions. • The panel size must be the same • The projection screen size must be the same • The left and right ends or top and bottom ends of the projection screen must be consistent. • The settings for the left and right edges of the edge blending are the same • The settings for the top and bottom edges of the edge blending are the same If the tiling conditions are satisfied, the video screen of the projector at...
Page 129
![Page 129
112
❼ Menu Descriptions & Functions [SETUP]
[MENU]
Selecting Menu Language [LANGUAGE]
You can choose one of 29 languages for on-screen instructions.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [INPUT DISPLAY]
This option turns on or off input name display such as HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER,
HDBaseT to...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-128.png "Page 129
112
❼ Menu Descriptions & Functions [SETUP]
[MENU]
Selecting Menu Language [LANGUAGE]
You can choose one of 29 languages for on-screen instructions.
NOTE: Your setting will not be affected even when [RESET] is done from the menu.
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [INPUT DISPLAY]
This option turns on or off input name display such as HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER,
HDBaseT to...")
112 ❼ Menu Descriptions & Functions [SETUP] [MENU] Selecting Menu Language [LANGUAGE] You can choose one of 29 languages for on-screen instructions. NOTE: Your setting will not be affected even when [RESET] is done from the menu. Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [INPUT DISPLAY] This option turns on or off input name display such as HDMI, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT to...
Page 130
![Page 130
113
[3D CAUTION MESSAGE]
This selects whether to display a caution message or not when switching to a 3D video.
The default condition when shipped from the factory is ON.
OFF ������������������������The 3D caution message screen will not be displayed�
ON �������������������������The 3D caution message screen will be displayed when switching to a 3D v\
ideo� Press the ENTER button
to cancel the message�
• The message will disappear automatically after 60 seconds or when other buttons are pressed. If it...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-129.png "Page 130
113
[3D CAUTION MESSAGE]
This selects whether to display a caution message or not when switching to a 3D video.
The default condition when shipped from the factory is ON.
OFF ������������������������The 3D caution message screen will not be displayed�
ON �������������������������The 3D caution message screen will be displayed when switching to a 3D v\
ideo� Press the ENTER button
to cancel the message�
• The message will disappear automatically after 60 seconds or when other buttons are pressed. If it...")
113 [3D CAUTION MESSAGE] This selects whether to display a caution message or not when switching to a 3D video. The default condition when shipped from the factory is ON. OFF ������������������������The 3D caution message screen will not be displayed� ON �������������������������The 3D caution message screen will be displayed when switching to a 3D v\ ideo� Press the ENTER button to cancel the message� • The message will disappear automatically after 60 seconds or when other buttons are pressed. If it...