NEC Projector PX803UL User Manual
Here you can view all the pages of manual NEC Projector PX803UL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
124
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• How to cancel the [CONTROL PANEL LOCK]
When the [CONTROL PANEL LOCK] is set to [ON], press the SOURCE button on the main body for about 10 seconds to cancel
the [CONTROL PANEL LOCK].
TIP:
• When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
• This CONTROL PANEL LOCK does not affect the remote control functions....](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-140.png "Page 141
124
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• How to cancel the [CONTROL PANEL LOCK]
When the [CONTROL PANEL LOCK] is set to [ON], press the SOURCE button on the main body for about 10 seconds to cancel
the [CONTROL PANEL LOCK].
TIP:
• When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu.
• This CONTROL PANEL LOCK does not affect the remote control functions....")
124 Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • How to cancel the [CONTROL PANEL LOCK] When the [CONTROL PANEL LOCK] is set to [ON], press the SOURCE button on the main body for about 10 seconds to cancel the [CONTROL PANEL LOCK]. TIP: • When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ ] will be displayed at the bottom right of the menu. • This CONTROL PANEL LOCK does not affect the remote control functions....
Page 142
![Page 142
125
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CONTROL
ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together
using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector .
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector�
CONTROL ID...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-141.png "Page 142
125
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CONTROL
ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together
using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector .
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector�
CONTROL ID...")
125 Setting ID to the Projector [CONTROL ID] You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote control. To do so, y ou ha ve to assign an ID n umber to each projector . CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to your projector� CONTROL ID...
Page 143
![Page 143
126
Turning On or Off Remote Sensor [REMOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: FRONT/BACK, FR ONT, BA CK, and HDBaseT .
NOTE:
• The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT supported transmission
device connected to the projector on which “HDBaseT” setting has been ON.
TIP:
• If the remote control system does not function when direct sunlight or strong...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-142.png "Page 143
126
Turning On or Off Remote Sensor [REMOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: FRONT/BACK, FR ONT, BA CK, and HDBaseT .
NOTE:
• The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT supported transmission
device connected to the projector on which “HDBaseT” setting has been ON.
TIP:
• If the remote control system does not function when direct sunlight or strong...")
126 Turning On or Off Remote Sensor [REMOTE SENSOR] This option determines which remote sensor on the projector is enabled in wireless mode. The options are: FRONT/BACK, FR ONT, BA CK, and HDBaseT . NOTE: • The remote control of the projector will not be able to receive signals if the power supply of the HDBaseT supported transmission device connected to the projector on which “HDBaseT” setting has been ON. TIP: • If the remote control system does not function when direct sunlight or strong...
Page 144
![Page 144
127
[NETWORK SETTINGS]
Important:
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page
152
)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Select [WIRED LAN] → [PROFILES] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for wired...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-143.png "Page 144
127
[NETWORK SETTINGS]
Important:
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page
152
)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Select [WIRED LAN] → [PROFILES] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for wired...")
127 [NETWORK SETTINGS] Important: • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page 152 ) TIP: The network settings you make will not be affected even when [RESET] is done from the menu. Hints on How to Set Up LAN Connection To set up the projector for a LAN connection: Select [WIRED LAN] → [PROFILES] → [PROFILE 1] or [PROFILE 2]. Two settings can be set for wired...
Page 145
![Page 145
128
WIRED LAN
PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the
projector can be recorded in the projector memory in two ways.
• Select [PROFILE 1] or [PROFILE 2] and then do settings for
[DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This
will store your settings in memory.
• To recall the settings from memory:
After selecting [PROFILE 1] or [PROFILE 2] from the [PRO-
FILES] list.
Select [OK] and press the ENTER button.
•...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-144.png "Page 145
128
WIRED LAN
PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the
projector can be recorded in the projector memory in two ways.
• Select [PROFILE 1] or [PROFILE 2] and then do settings for
[DHCP] and the other options.
After doing this, select [OK] and press the ENTER button. This
will store your settings in memory.
• To recall the settings from memory:
After selecting [PROFILE 1] or [PROFILE 2] from the [PRO-
FILES] list.
Select [OK] and press the ENTER button.
•...")
128 WIRED LAN PROFILES• The settings for using the built-in Ethernet/HDBaseT port in the projector can be recorded in the projector memory in two ways. • Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] and the other options. After doing this, select [OK] and press the ENTER button. This will store your settings in memory. • To recall the settings from memory: After selecting [PROFILE 1] or [PROFILE 2] from the [PRO- FILES] list. Select [OK] and press the ENTER button. •...
Page 146
129 PROJECTOR NAME PROJECTOR NAMESet a unique projector name. Up to 16 alphanu- meric characters and symbols DOMAIN Set a host name and domain name of the projector. HOST NAMESet a host name of the projector.Up to 15 alphanumeric characters DOMAIN NAMESet a domain name of the projector.Up to 60 alphanumeric characters 5. Using On-Screen Menu
Page 147
![Page 147
130
ALERT MAIL
ALERT MAILThis option will notify your computer of error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature�
Clearing a checkmark will turn off the Alert Mail feature�
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Information
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: PX803UL Ser ies
LIGHT HOURS USED: 0000[H]
—
HOST NAMEType in a host name.Up to 15 alphanumeric
characters...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-146.png "Page 147
130
ALERT MAIL
ALERT MAILThis option will notify your computer of error messages via e-mail
when using wireless or wired LAN.
Placing a checkmark will turn on the Alert Mail feature�
Clearing a checkmark will turn off the Alert Mail feature�
Sample of a message to be sent from the projector:
Subject: [Projector] Projector Information
THE COOLING FAN HAS STOPPED.
[INFORMATION]
PROJECTOR NAME: PX803UL Ser ies
LIGHT HOURS USED: 0000[H]
—
HOST NAMEType in a host name.Up to 15 alphanumeric
characters...")
130 ALERT MAIL ALERT MAILThis option will notify your computer of error messages via e-mail when using wireless or wired LAN. Placing a checkmark will turn on the Alert Mail feature� Clearing a checkmark will turn off the Alert Mail feature� Sample of a message to be sent from the projector: Subject: [Projector] Projector Information THE COOLING FAN HAS STOPPED. [INFORMATION] PROJECTOR NAME: PX803UL Ser ies LIGHT HOURS USED: 0000[H] — HOST NAMEType in a host name.Up to 15 alphanumeric characters...
Page 148
131 NETWORK SERVICE HTTP SERVERSet a password for your HTTP server.Up to 10 alphanumeric characters PJLink This option allows you to set a passw ord when you use the PJLink feature. NOTE: • Do not forget your password. However, if you forget your password, consult with your dealer. • What is PJLink? PJLink is a standardization of protocol used for controlling projectors of different manufacturers. This standard protocol is established by Japan Business Machine and Information System Industries...
Page 149
![Page 149
132
[SOURCE OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE].
OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal�
NORMAL ����������������Default setting� The computer signal will be automatically adjusted� Normally select this...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-148.png "Page 149
132
[SOURCE OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for
noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE].
OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal�
NORMAL ����������������Default setting� The computer signal will be automatically adjusted� Normally select this...")
132 [SOURCE OPTIONS] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in tw o w ays: [NORMAL] and [FINE]. OFF ������������������������The computer signal will not be automatically adjusted� You can manually optimize the computer signal� NORMAL ����������������Default setting� The computer signal will be automatically adjusted� Normally select this...
Page 150
![Page 150
133
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
The subtitles and text will be displayed a short while after the on-screen menu disappears.
OFF ������������������������This exits the closed caption mode�
CAPTION 1-4 ���������Text is superimposed�
TEXT 1-4 ����������������Text is displayed�
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/b lack...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-149.png "Page 150
133
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the projected image of Video
or S-Video.
The subtitles and text will be displayed a short while after the on-screen menu disappears.
OFF ������������������������This exits the closed caption mode�
CAPTION 1-4 ���������Text is superimposed�
TEXT 1-4 ����������������Text is displayed�
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/b lack...")
133 Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. The subtitles and text will be displayed a short while after the on-screen menu disappears. OFF ������������������������This exits the closed caption mode� CAPTION 1-4 ���������Text is superimposed� TEXT 1-4 ����������������Text is displayed� Selecting a Color or Logo for Background [BACKGROUND] Use this feature to display a blue/b lack...