NEC Projector PX803UL User Manual
Here you can view all the pages of manual NEC Projector PX803UL User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 71
54 PICTURE: Controls the video adjustment of the projector. BRIGHTNESS ▲ ����Increases the brightness adjustment value� BRIGHTNESS ▼ ����Decreases the brightness adjustment value� CONTRAST ▲ ��������Increases the contrast adjustment value� CONTRAST ▼ ��������Decreases the contrast adjustment value� COLOR ▲ ��������������Increases the color adjustment value� COLOR ▼ ��������������Decreases the color adjustment value� HUE ▲ �������������������Increases the hue adjustment value� HUE ▼...
Page 72
55 NETWORK SETTINGS • SETTINGS WIRED SETTINGSet for wired LAN. APPLYApply your settings to wired LAN. PROFILE 1/PROFILE 2Two settings can be set for wired LAN connection. Select PROFILE 1 or PR OFILE 2. DISABLETurn off wired LAN connection DHCP ONAutomatically assign IP address, subnet mask, and gateway to the projector from your DHCP server. DHCP OFFSet IP address, subnet mask, and gateway to the projector assigned by your networ k administrator. IP ADDRESSSet your IP address of the network connected...
Page 73
![Page 73
56
• NAME
PROJECTOR NAMEEnter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected e ven when [RESET] is done from the men u.
HOST NAMEEnter the hostname of the network connected to the projector. A host name must be
15 or less.
DOMAIN NAMEEnter the domain name of the networ k connected to the projector. A domain name
must be 60 characters or less.
• ALERT MAIL
ALERT MAILThis option will...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-72.png "Page 73
56
• NAME
PROJECTOR NAMEEnter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected e ven when [RESET] is done from the men u.
HOST NAMEEnter the hostname of the network connected to the projector. A host name must be
15 or less.
DOMAIN NAMEEnter the domain name of the networ k connected to the projector. A domain name
must be 60 characters or less.
• ALERT MAIL
ALERT MAILThis option will...")
56 • NAME PROJECTOR NAMEEnter a name for your projector so that your computer can identify the projector. A projector name must be 16 characters or less. TIP: Projector name will not be affected e ven when [RESET] is done from the men u. HOST NAMEEnter the hostname of the network connected to the projector. A host name must be 15 or less. DOMAIN NAMEEnter the domain name of the networ k connected to the projector. A domain name must be 60 characters or less. • ALERT MAIL ALERT MAILThis option will...
Page 74
57 • NETWORK SERVICE PJLink PASSWORDSet a password for PJLink*. A password must be 32 characters or less. Do not forget your password. However, if y ou f orget y our pass word, consult with y our dealer . HTTP PASSWORDSet a password for HTTP server. A password m ust be 10 char acters or less . When a password is set up, you will be prompted for your user name (arbitrar y) and password during LOGON. AMX BEACONTurn on or off for detection from AMX Device Discovery when connecting to the networ k...
Page 75
![Page 75
58
⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS
MEMORY]
The adjusted values can be stored in projector memory when using the LENS SHIFT, ZOOM and FOCUS buttons
of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens
shift, focus, and zoom at the time of source selection. There are two ways to sav e adjusted values for lens shift, zoom,
and focus.
Function nameDescriptionpage
REF. LENS MEMORYAdjusted values common to all input...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-74.png "Page 75
58
⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS
MEMORY]
The adjusted values can be stored in projector memory when using the LENS SHIFT, ZOOM and FOCUS buttons
of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens
shift, focus, and zoom at the time of source selection. There are two ways to sav e adjusted values for lens shift, zoom,
and focus.
Function nameDescriptionpage
REF. LENS MEMORYAdjusted values common to all input...")
58 ⓫ Storing Changes for Lens Shift, Zoom, and Focus [LENS MEMORY] The adjusted values can be stored in projector memory when using the LENS SHIFT, ZOOM and FOCUS buttons of the projector. Adjusted values can be applied to the signal you selected. This will eliminate the need to adjust lens shift, focus, and zoom at the time of source selection. There are two ways to sav e adjusted values for lens shift, zoom, and focus. Function nameDescriptionpage REF. LENS MEMORYAdjusted values common to all input...
Page 76
![Page 76
59
To store your adjusted values in [REF. LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ENTER button.
3. Press the ▶ button to select [INSTALLATION(2)].
4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton.
The [REF. LENS MEMORY] screen will be displa yed.
5. Make sure [PROFILE] is highlighted, then press the ENTER b utton.
The [PROFILE] selection screen appears.
6. Press the ▼/▲ buttons to...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-75.png "Page 76
59
To store your adjusted values in [REF. LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ENTER button.
3. Press the ▶ button to select [INSTALLATION(2)].
4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton.
The [REF. LENS MEMORY] screen will be displa yed.
5. Make sure [PROFILE] is highlighted, then press the ENTER b utton.
The [PROFILE] selection screen appears.
6. Press the ▼/▲ buttons to...")
59 To store your adjusted values in [REF. LENS MEMORY]: 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton. The [REF. LENS MEMORY] screen will be displa yed. 5. Make sure [PROFILE] is highlighted, then press the ENTER b utton. The [PROFILE] selection screen appears. 6. Press the ▼/▲ buttons to...
Page 77
![Page 77
60
The confirmation screen will be displayed.
8. Press the ◀ button to select and [YES] and press the ENTER button.
Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it.
• The [FORCED MUTE] setting stops projection during lens shift. (→ page 118)
9. Press the MENU button.
The menu will be closed.
TIP:
• To store adjusted values for each input source, use the Lens Memory function. (→ page 101)
3. Convenient Features](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-76.png "Page 77
60
The confirmation screen will be displayed.
8. Press the ◀ button to select and [YES] and press the ENTER button.
Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it.
• The [FORCED MUTE] setting stops projection during lens shift. (→ page 118)
9. Press the MENU button.
The menu will be closed.
TIP:
• To store adjusted values for each input source, use the Lens Memory function. (→ page 101)
3. Convenient Features")
60 The confirmation screen will be displayed. 8. Press the ◀ button to select and [YES] and press the ENTER button. Select a [PROFILE] number and save the adjusted [LENS SHIFT], [ZOOM], and [FOCUS] values to it. • The [FORCED MUTE] setting stops projection during lens shift. (→ page 118) 9. Press the MENU button. The menu will be closed. TIP: • To store adjusted values for each input source, use the Lens Memory function. (→ page 101) 3. Convenient Features
Page 78
![Page 78
61
To call up your adjusted values from [REF. LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ENTER button.
3. Press the ▶ button to select [INSTALLATION(2)].
4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton.
The [REF. LENS MEMORY] screen will be displa yed.
5. Make sure [PROFILE] is highlighted, then press the ENTER b utton.
The [PROFILE] selection screen appears.
6. Press the ▼/▲ buttons to...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-77.png "Page 78
61
To call up your adjusted values from [REF. LENS MEMORY]:
1. Press the MENU button.
The menu will be displayed.
2. Press the ▶ button to select [SETUP] and press the ENTER button.
3. Press the ▶ button to select [INSTALLATION(2)].
4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton.
The [REF. LENS MEMORY] screen will be displa yed.
5. Make sure [PROFILE] is highlighted, then press the ENTER b utton.
The [PROFILE] selection screen appears.
6. Press the ▼/▲ buttons to...")
61 To call up your adjusted values from [REF. LENS MEMORY]: 1. Press the MENU button. The menu will be displayed. 2. Press the ▶ button to select [SETUP] and press the ENTER button. 3. Press the ▶ button to select [INSTALLATION(2)]. 4. Press the ▼ button to select [REF. LENS MEMORY] and press the ENTER b utton. The [REF. LENS MEMORY] screen will be displa yed. 5. Make sure [PROFILE] is highlighted, then press the ENTER b utton. The [PROFILE] selection screen appears. 6. Press the ▼/▲ buttons to...
Page 79
![Page 79
62
The lens will shift based on the adjusted values stored in the selected [PROFILE].
8. Press the ◀ button to select and [YES] and press the ENTER button.
The adjusted values will be applied to the current signal. .
9. Press the MENU button.
The menu will be closed.
3. Convenient Features](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-78.png "Page 79
62
The lens will shift based on the adjusted values stored in the selected [PROFILE].
8. Press the ◀ button to select and [YES] and press the ENTER button.
The adjusted values will be applied to the current signal. .
9. Press the MENU button.
The menu will be closed.
3. Convenient Features")
62 The lens will shift based on the adjusted values stored in the selected [PROFILE]. 8. Press the ◀ button to select and [YES] and press the ENTER button. The adjusted values will be applied to the current signal. . 9. Press the MENU button. The menu will be closed. 3. Convenient Features
Page 80
![Page 80
63
TIP:
To call up the adjusted values from [LENS MEMORY]:
1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button.
The confirmation screen will be displayed.
2. Press the ◀ button to select and [YES] and press the ENTER button.
During projection, if the adjusted values for an input signal have been sav ed, the lens will shift. If not, the lens will
shift according to the adjusted values stored in the selected [REF. LENS MEMOR Y] [PR OFILE] n umber.
To automatically...](http://img.usermanuals.tech/thumb/54/100326/w300_projector_manual_9406_d-79.png "Page 80
63
TIP:
To call up the adjusted values from [LENS MEMORY]:
1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button.
The confirmation screen will be displayed.
2. Press the ◀ button to select and [YES] and press the ENTER button.
During projection, if the adjusted values for an input signal have been sav ed, the lens will shift. If not, the lens will
shift according to the adjusted values stored in the selected [REF. LENS MEMOR Y] [PR OFILE] n umber.
To automatically...")
63 TIP: To call up the adjusted values from [LENS MEMORY]: 1. From the menu, select [ADJUST] → [LENS MEMORY] → [MOVE] and press the ENTER button. The confirmation screen will be displayed. 2. Press the ◀ button to select and [YES] and press the ENTER button. During projection, if the adjusted values for an input signal have been sav ed, the lens will shift. If not, the lens will shift according to the adjusted values stored in the selected [REF. LENS MEMOR Y] [PR OFILE] n umber. To automatically...