NEC Projector Px750u User Manual
Here you can view all the pages of manual NEC Projector Px750u User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 141
![Page 141
127
5. Using On-Screen Menu
[WIRELESS LAN(1)]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[WIRELESS LAN(2)]
SSID NETWORK TYPE
WEP/WPA CHANNEL
SIGNAL LEVEL
[VERSION(1)]
FIRMWARE DATA
FIRMWARE2](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-140.png "Page 141
127
5. Using On-Screen Menu
[WIRELESS LAN(1)]
IP ADDRESS SUBNET MASK
GATEWAY MAC ADDRESS
[WIRELESS LAN(2)]
SSID NETWORK TYPE
WEP/WPA CHANNEL
SIGNAL LEVEL
[VERSION(1)]
FIRMWARE DATA
FIRMWARE2")
127 5. Using On-Screen Menu [WIRELESS LAN(1)] IP ADDRESS SUBNET MASK GATEWAY MAC ADDRESS [WIRELESS LAN(2)] SSID NETWORK TYPE WEP/WPA CHANNEL SIGNAL LEVEL [VERSION(1)] FIRMWARE DATA FIRMWARE2
Page 142
![Page 142
128
5. Using On-Screen Menu
[VERSION(2)]
FIRMWARE3
[OTHERS]
PROJECTOR NAME MODEL NO.
SERIAL NUMBER LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-141.png "Page 142
128
5. Using On-Screen Menu
[VERSION(2)]
FIRMWARE3
[OTHERS]
PROJECTOR NAME MODEL NO.
SERIAL NUMBER LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set)")
128 5. Using On-Screen Menu [VERSION(2)] FIRMWARE3 [OTHERS] PROJECTOR NAME MODEL NO. SERIAL NUMBER LAN UNIT TYPE CONTROL ID (when [CONTROL ID] is set)
Page 143
![Page 143
129
5. Using On-Screen Menu
8 Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-142.png "Page 143
129
5. Using On-Screen Menu
8 Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except
the following:
[CURRENT SIGNAL]
Resets the adjustments for the current signal to the factory preset levels.
The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS],
[ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...")
129 5. Using On-Screen Menu 8 Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [COLOR], [HUE], [SHARPNESS], [ASPECT RATIO], [HORIZONTAL], [VERTICAL], [CLOCK], [PHASE], and...
Page 144
![Page 144
130
5. Using On-Screen Menu
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press
the ENTER button.
The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need
to clear the filter usage hour.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-143.png "Page 144
130
5. Using On-Screen Menu
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press
the ENTER button.
The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need
to clear the filter usage hour.
NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.")
130 5. Using On-Screen Menu Clearing the Filter Usage Hours [CLEAR FILTER HOURS] Resets the filter usage back to zero. Selecting this option displays submenu for a confirmation. Select [YES] and press the ENTER button. The [OFF] item is selected for [FILTER MESSAGE] at the time of shipment. When [OFF] is selected, you do not need to clear the filter usage hour. NOTE: Elapsed time of the filter use will not be affected even when [RESET] is done from the menu.
Page 145
![Page 145
131
5. Using On-Screen Menu
❾ Application Menu
When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis-
played.
The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and
Tools (TOOLS).
The User Supportware is contained on the supplied NEC Projector CD-ROM.
In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 149)
The [BASIC] menu contains minimum essentials of...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-144.png "Page 145
131
5. Using On-Screen Menu
❾ Application Menu
When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis-
played.
The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and
Tools (TOOLS).
The User Supportware is contained on the supplied NEC Projector CD-ROM.
In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 149)
The [BASIC] menu contains minimum essentials of...")
131 5. Using On-Screen Menu ❾ Application Menu When [NETWORK] is selected from the [SOURCE] menu, the application menu [APPLICATION MENU] will be dis- played. The application menu allows you to set up the User Supportware, Network Settings (NETWORK SETTINGS) and Tools (TOOLS). The User Supportware is contained on the supplied NEC Projector CD-ROM. In [ADMINISTRATOR MODE], either [ADVANCED] menu or [BASIC] menu can be selected. (→ page 149) The [BASIC] menu contains minimum essentials of...
Page 146
132 5. Using On-Screen Menu REMOTE DESKTOP CONNECTION This allows you to set up for computer name entry and effects for Remote Desktop. NOTE: • A USB keyboard is required to set up the Remote Desktop Connection.
Page 147
![Page 147
133
5. Using On-Screen Menu
NETWORK SETTINGS
Important:
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page
163)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Select [WIRED LAN] or [WIRELESS LAN] → [PROFILES] → [PROFILE 1]...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-146.png "Page 147
133
5. Using On-Screen Menu
NETWORK SETTINGS
Important:
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page
163)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Select [WIRED LAN] or [WIRELESS LAN] → [PROFILES] → [PROFILE 1]...")
133 5. Using On-Screen Menu NETWORK SETTINGS Important: • Consult with your network administrator about these settings. • When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projector. (→ page 163) TIP: The network settings you make will not be affected even when [RESET] is done from the menu. Hints on How to Set Up LAN Connection To set up the projector for a LAN connection: Select [WIRED LAN] or [WIRELESS LAN] → [PROFILES] → [PROFILE 1]...
Page 148
![Page 148
134
5. Using On-Screen Menu
WIRED LAN or WIRELESS LAN (ADVANCED menu only)
* To use the wireless LAN functions, connect a separately sold wireless LAN unit to the projector. (→ page 164)
PROFILES• Up to two settings for the LAN port or USB wireless LAN unit
can be stored in memory of the projector. Total of four settings
can be stored.
Five settings can be stored: two for the built-in LAN port, two
for wireless LAN and one for WPS.
• Select [PROFILE 1] or [PROFILE 2] and...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-147.png "Page 148
134
5. Using On-Screen Menu
WIRED LAN or WIRELESS LAN (ADVANCED menu only)
* To use the wireless LAN functions, connect a separately sold wireless LAN unit to the projector. (→ page 164)
PROFILES• Up to two settings for the LAN port or USB wireless LAN unit
can be stored in memory of the projector. Total of four settings
can be stored.
Five settings can be stored: two for the built-in LAN port, two
for wireless LAN and one for WPS.
• Select [PROFILE 1] or [PROFILE 2] and...")
134 5. Using On-Screen Menu WIRED LAN or WIRELESS LAN (ADVANCED menu only) * To use the wireless LAN functions, connect a separately sold wireless LAN unit to the projector. (→ page 164) PROFILES• Up to two settings for the LAN port or USB wireless LAN unit can be stored in memory of the projector. Total of four settings can be stored. Five settings can be stored: two for the built-in LAN port, two for wireless LAN and one for WPS. • Select [PROFILE 1] or [PROFILE 2] and...
Page 149
![Page 149
135
5. Using On-Screen Menu
• When selecting [WPS], the network will be connected by using
settings stored automatically with the WPS function.
Selecting [WPS] will allow the projector to access the network
by using the settings the WPS function automatically stored.
DHCPPlace a check mark to automatically assign an IP address to the
projector from your DHCP server.
Clear this check box to register the IP address or subnet mask
number obtained from your network administrator.
—
IP...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-148.png "Page 149
135
5. Using On-Screen Menu
• When selecting [WPS], the network will be connected by using
settings stored automatically with the WPS function.
Selecting [WPS] will allow the projector to access the network
by using the settings the WPS function automatically stored.
DHCPPlace a check mark to automatically assign an IP address to the
projector from your DHCP server.
Clear this check box to register the IP address or subnet mask
number obtained from your network administrator.
—
IP...")
135 5. Using On-Screen Menu • When selecting [WPS], the network will be connected by using settings stored automatically with the WPS function. Selecting [WPS] will allow the projector to access the network by using the settings the WPS function automatically stored. DHCPPlace a check mark to automatically assign an IP address to the projector from your DHCP server. Clear this check box to register the IP address or subnet mask number obtained from your network administrator. — IP...
Page 150
![Page 150
136
5. Using On-Screen Menu
SITE SURVEYDisplays a list of available SSIDs for wireless LAN on site. Select
an SSID which you can access.
To select an SSID, highlight [SSID] and use the to select [OK]
and press the ENTER button.
�����������������������Wireless access point
�����������������������Ad Hoc PC
�����������������������WEP or WPA enabled —
SECURITY
This will turn on or off the encryption mode for secure transmis-
sion.
To use encryption, specify a WEP key or...](http://img.usermanuals.tech/thumb/54/92557/w300_nec-px750u-manual_d-149.png "Page 150
136
5. Using On-Screen Menu
SITE SURVEYDisplays a list of available SSIDs for wireless LAN on site. Select
an SSID which you can access.
To select an SSID, highlight [SSID] and use the to select [OK]
and press the ENTER button.
�����������������������Wireless access point
�����������������������Ad Hoc PC
�����������������������WEP or WPA enabled —
SECURITY
This will turn on or off the encryption mode for secure transmis-
sion.
To use encryption, specify a WEP key or...")
136 5. Using On-Screen Menu SITE SURVEYDisplays a list of available SSIDs for wireless LAN on site. Select an SSID which you can access. To select an SSID, highlight [SSID] and use the to select [OK] and press the ENTER button. �����������������������Wireless access point �����������������������Ad Hoc PC �����������������������WEP or WPA enabled — SECURITY This will turn on or off the encryption mode for secure transmis- sion. To use encryption, specify a WEP key or...