NEC Projector PX602WL-WH User Manual

118
[SOURCE(2)]
SIGNAL	TYPE	VIDEO 	TYPE	
BIT	DEPTH	VIDEO 	LEVEL	
LINK	RATE	LINK 	 LANE
3D	FORMAT
[SOURCE(3)]
INPUT	TERMINAL	RESOLUTION	
HORIZONTAL	FREQUENCY	VER TICAL 	FREQ UENCY	
SYNC	TYPE	SYNC 	POLARITY	
SCAN	TYPE	SOURCE 	NAME	
ENTRY	NO.
[SOURCE(4)]
SIGNAL	TYPE	VIDEO 	TYPE	
BIT	DEPTH	VIDEO 	LEVEL	
LINK	RATE	LINK 	 LANE
3D	FORMAT
5. Using On-Screen Menu  

119
[WIRED LAN]
IP	ADDRESS	SUBNET 	MASK	
GATEWAY	MAC 	 ADDRESS
[VERSION(1)]
FIRMWARE	DATA	
SUB-CPU
[OTHERS]
DATE	TIME	PR OJECTOR 	NAME	
MODEL	NO.	SERIAL 	NUMBER	
CONTROL	ID	(when	[CONTROL	ID]	is	set)
5. Using On-Screen Menu  

120
[HDBaseT]
SIGNAL	QUALITY	OPERA TION 	MODE	
LINK	STATUS	HDMI 	 STATUS
5. Using On-Screen Menu  

121
❶ Mounting a lens (sold separately)
This	projector	can 	be 	used 	with 	3 	kinds 	of 	optional 	lenses 	(sold 	separ ately).	The 	char t 	belo w 	sho ws 	compatib le 	lenses 	
according	to	the 	projector 	model.	The 	descr iptions 	here 	are 	f or 	the 	NP35ZL 	(standard 	z oom) 	lens .	Mount 	other 	lenses 	
in	the	same	manner.	See 	 page 	164	for	lens	options.
Lens	(model)
Projector	(model	name)NP34ZLShort	focus	zoomNP35ZLStandard	zoomNP36ZLStandard	zoomNP37ZLLong	focus	zoom
PX602UL-WH/PX602UL-BK...

122
Using	the	lock	mechanism
Release:	Locking 	 screw 	 is 	 tightened
The	lens	can	be	attached	or	detached	(factory	default	setting).
Lock:	Locking 	 screw 	 is 	 untightened
The	lens	cannot 	be 	attached 	or 	detached.	Pressing 	the 	loc k 	release 	b ut-
ton	all	the 	w ay 	in 	disab les 	the 	loc k 	mechanism 	and 	allo ws 	the 	lens 	to 	be 	
attached	or	detached.
Mounting the lens
Preparation:	
Prepare	a	flathead	screwdriver.
*	 The	illustration	omits	the	projector	cabinet.
1. Remove the lens hood....

123
4.	 With	the	“T OP”	orientation 	indicator 	facing 	upwar ds,	inser t	
the lens into the lens mount.
	 Align	the	flange 	on 	the 	upper 	por tion 	of 	the 	lens 	with 	the 	catch 	
on	the	left	side	of	the	lens	mount.
NOTE:
•	 Insert	the	lens 	carefully 	to 	avoid 	it 	from 	damage 	by 	knocking 	against	
the lens mount.
5. Turn the lens clockwise until it clicks into place.
	 The	3	flanges 	ha ve 	no w 	engaged 	with 	the 	3 	catches 	and 	the 	
lens	unit	has	been	mounted.
•	 To	lock	the 	lens 	unit...

124
Removing the lens
Preparation:	
Return	the	lens	position	to	the	home	position.	(→	page	19)
After	the	lens	shift	has	moved,	refer	to	the	warning	on	page	19	and	turn	off	the	power.
1. Remove the lens hood.
	 Refer	to	Step	1	under	“Mounting	 the 	 lens”.
•	 If	the	lens 	unit 	is 	loc ked 	please 	see 	page 	122	and	follow 	the 	
instructions	under	Using	the	Lock	Function	to	unlock	it.
2.	 Turn	the	lens 	counter clockwise 	to 	remo ve 	it 	fr om 	the 	catc h,	
and	slowly	pull	forward	to	remove.
•	 After...

125
❷ Making Connections
A	computer	cab le, 	BNC 	cab le 	(5-core 	type), 	HDMI 	cab le, 	or 	a 	Displa yPort 	cab le 	can 	be 	used 	to 	connect 	to 	a 	computer .
The	connection	cable	is	not	enclosed	with	the	projector.	Please 	 get 	 ready 	 a 	 suitable 	 cable 	 for 	 the 	 connection.
Analog RGB signal connection
•	 Connect	the	computer 	cab le 	to 	the 	displa y 	output 	ter minal 	(mini 	D-sub 	15 	pin) 	on 	the 	computer 	and 	the 	COMPUTER	
1	IN	terminal	on	the	projector.	Please 	 use 	 a...

126
Digital RGB signal connection
•	 Connect	a	commercially 	a vailable 	HDMI 	cab le 	betw een 	the 	computer’ s 	HDMI 	output 	ter minal 	and 	the 	projector’ s 	
HDMI	IN	terminal.
•	 Connect	a	commercially 	a vailable 	Displa yPort 	cab le 	betw een 	the 	computer’ s 	Displa yPort 	output 	ter minal 	and 	the 	
projector’s	DisplayPort	IN	terminal.
•	 Select	the	source	name	for	its	appropriate	input	terminal	after	turning	on	the	projector.
Input	terminalSOURCE	button	on	the	projector	
cabinetButton	on...

127
Cautions	when	connecting	an	HDMI	cable
•	 Use	a	certified	High	Speed	HDMI®	Cable	or	High	Speed	HDMI®	Cable	with	Ethernet.
Cautions	when	connecting	a	DisplayPort	cable
•	 Use	a	certified	DisplayPort	cable.
 
•	 Depending	on	the	computer,	some	time	may	be	required	until	the	image	is	displayed.
•	 Some	DisplayPort	cables	(commercially	available)	have	locks.
•	 To	disconnect	the	cable,	press	the	button	on	the	top	of	the	cable’s	terminal,	then	pull	the	cable	out.
•	 Power	can	be 	supplied 	to 	the...