NEC Projector PX602WL-WH User Manual

Projector
PX6 02 U L-W H/PX6 02 U L- B K/ 
PX602WL-WH/PX602WL-BK
User’s Manual
Model No.
NP-PX602UL-WH/NP-PX602UL-BK/NP-PX602WL-WH/NP-PX602WL-BK 

Ver. 1 9/14
•	 Apple,	Mac,	Mac	OS,	and	MacBook	are	trademarks	of	Apple	Inc.	registered 	 in 	 the 	 U.S.	 and 	 other 	 countries.
•	 Microsoft,	Windows, 	Windo ws 	Vista, 	Inter net 	Explorer , 	.NET 	F ramework 	and 	P owerPoint 	are 	either 	a 	registered 	
trademark	or	trademark	of	Microsoft	Corporation	in	the	United	States	and/or	other	countries.
•	 MicroSaver	is	a	registered	trademark	of	Kensington	Computer	Products	Group,	a	division	of	ACCO	Brands.
•	 Adobe,	Adobe	PDF , 	Adobe 	Reader , 	and...

i
Important Information
Safety Cautions
Precautions
Please	read	this	manual	carefully	before	using	your	NEC	projector	and	keep	the	manual	handy	for	future	reference.
CAUTION
To	turn	off	main	power,	be	sure	to	remove	the	plug	from	power	outlet.
The	power	outlet 	soc ket 	should 	be 	installed 	as 	near 	to 	the 	equipment 	as 	possib le, 	and 	should 	be 	easily 	
accessible.
CAUTION
TO	PREVENT	SHOCK,	DO	NOT	OPEN	THE	 CABINET.
THERE	ARE	HIGH-VOLTAGE	COMPONENTS	INSIDE.
REFER	SERVICING	TO 	 QUALIFIED...

ii
WARNING TO CALIFORNIA RESIDENTS:
Handling	the	cab les 	supplied 	with 	this 	product 	will 	e xpose 	y ou 	to 	lead, 	a 	chemical 	kno wn 	to 	the 	State 	of 	Calif ornia 	
to	cause	birth	defects	or	other	reproductive	harm.	WASH 	 HANDS 	 AFTER 	 HANDLING.
RF Interference (for USA only)
WARNING
The	Federal	Comm unications 	Commission 	does 	not 	allo w 	an y 	modifications 	or 	changes 	to 	the 	unit 	EXCEPT 	those 	
specified	by	NEC 	Displa y 	Solutions 	of 	Amer ica, 	Inc.	in 	this 	man ual.	F...

iii
WARNING
•	 Do	not	place 	an y 	objects , 	which 	are 	easily 	aff ected 	b y 	heat, 	in 	front 	of 	the 	projector 	lens .	Doing 	so 	could 	lead 	
to	the	object	melting	from	the	heat	that	is	emitted	from	the	light	output.	
Do	not	use 	the 	projector 	with 	it 	leaning 	to 	the 	left 	and 	r ight.	This 	ma y 	result 	in 	a 	malfunction, 	ho wever, 	por trait 	instal-
lation*	is	possib le.	F or 	por trait 	installation, 	install 	the 	projector 	with 	the 	intak e 	v ent 	at 	the 	bottom.	Obser ve...

iv
•	 Handle	the	power	cord	carefully.	A 	 damaged 	 or 	 frayed 	 power 	 cord 	 can 	 cause 	 electric 	 shock 	 or 	 fire.
-	 Do	not	use	any	power	cord	other	than	the	one	supplied	with	the	projector.
-	 Do	not	bend	or	tug	the	power	cord	excessively.
-	 Do	not	place	the	power	cord	under	the	projector,	or	any	heavy	object.
-	 Do	not	cover	the	power	cord	with	other	soft	materials	such	as	rugs.
-	 Do	not	heat	the	power	cord.
-	 Do	not	handle	the	power	plug	with	wet	hands.
•	 Turn	off	the 	projector ,...

v
Light Module
1.	 A	light	module	containing	multiple	laser	diodes	is	equipped	in	the	product	as	the	light	source.
2.	 These	laser	diodes 	are 	sealed 	in 	the 	light 	module .	No 	maintenance 	or 	ser vice 	is 	required 	f or 	the 	perf ormance 	of 	
the	light	module.
3.	 End	user	is	not	allowed	to	replace	the	light	module.
4.	 Contact	qualified	distributor	for	light	module	replacement	and	further	information.
Laser Safety Caution
•	 This	product	is	classified	as	Class	2	of	IEC60825-1	Second	edition...

vi
 Health precautions to users viewing 3D images
Before	viewing,	be 	sure 	to 	read 	health 	care 	precautions 	that 	ma y 	be 	f ound 	in 	the 	user’ s 	man ual 	included 	with 	y our 	3D	
eyeglasses	or	y our 	3D 	compatib le 	content 	such 	as 	Blu-r ay 	Discs , 	video 	games , 	computer’ s 	video 	files 	and 	the 	lik e.
To	avoid	any	adverse	symptoms,	heed	the	following:
•	 Do	not	use	3D	eyeglasses	for	viewing	any	material	other	than	3D	images.
•	 Allow	a	distance 	of 	2 	m/7 	f eet 	or 	g reater...

vii
Clearance for Installing the Projector
Allow	ample	clearance	between	the	projector	and	its	surroundings	as	shown	below.
The	high	temperature	exhaust	coming	out	of	the	device	may	be	sucked	into	the	device	again.
Avoid	installing	the	projector	in	a	place	where	air	movement	from	the	HVAC	is	directed	at	the	projector.
Heated	air	from 	the 	HV AC 	can 	be 	tak en 	in 	b y 	the 	projector's 	intak e 	v ent.	If 	this 	happens , 	the 	temper ature 	inside 	the 	
projector	will	rise	too	high	causing	the...

viii
Table of Contents
Important Information ........................................................................\
....................i
1. Introduction ........................................................................\
...................................1
❶
	What’s 	 in 	 the 	 Box? ........................................................................\
..................................1
❷
	Introduction	to	the	Projector...