NEC Projector PH1400U User Manual

157
5. Using On-Screen Menu
18.	After	completing	required	settings,	select	[OK]	and	press	the	ENTER	button.
	 The	[WIRELESS]	page	will	be	returned.
19.	Select	[RECONNECT]	and	press	the	ENTER	button.
20.	Select	[OK]	and	press	the	ENTER	button.
This	will	complete	setting	[PEAP-MSCHAPv2]	for	[EAP	 TYPE]	in	[WPA-EAP]	or	[WPA2-EAP].
TIP:
Clearing the digital certificate that is installed on the projector
To	clear	the	digital	certificate	installed	on	the	projector,	follow	the	steps	below.
By	doing	the...

158
5. Using On-Screen Menu
WPS
When	the	wireless	 LAN	access	 point	connected	 to	the	 projector	 supports	WPS	(Wi-Fi	 Protected	 Setup	TM),	you	can	
use	PIN	method	or	push	button	method	to	set	up	the	wireless	LAN	for	the	projector.
PIN	 TYPESet	a	4-digit	 or	8	digit-PIN	 code	of	WPS	 for	your	 access	 point	to	complete	 setting	for	the	
SSID	security.
PUSH	BUTTON	 TYPEPress	the	dedicated	 button	of	the	 access	 point	and	the	projector’s	 wireless	LAN	unit	to	
complete	setting	for	the	SSID	security....

159
5. Using On-Screen Menu
PROJECTOR	NAME	(ADVANCED	menu	only)
PROJECTOR	NAMESet	a	unique	projector	name.	Up	to	16	alphanu-
meric	characters	and	
symbols
DOMAIN	(ADVANCED	menu	only)
Set	a	host	name	and	domain	name	of	the	projector.
HOST	NAMESet	a	host	name	of	the	projector.Up	to	15	alphanumeric	
characters
DOMAIN	NAMESet	a	domain	name	of	the	projector.Up	to	60	alphanumeric	
characters 

160
5. Using On-Screen Menu
ALERT	MAIL	(ADVANCED	menu	only)
ALERT	MAILThis	option	 will	notify	 your	computer	 of	lamp	 replace	 time	or	error	
messages	via	e-mail	when	using	wireless	or	wired	LAN. 	
Placing a checkmark will turn on the Alert Mail feature�
Clearing a checkmark will turn off the Alert Mail feature�
Sample of a message to be sent from the projector:
The	lamp	 and	filters	 are	at	the	 end	 of	its	 usable	 life.	Please	
replace	the	lamp.
Projector	Name: 	NEC	Projector
Lamp	1	Hours	Used:...

161
5. Using On-Screen Menu
NETWORK	SERVICE	(ADVANCED	menu	only)
HTTP	SERVERSet	a	password	for	your	HTTP	server.Up	to	10	alphanumeric	
characters
PJLink
This 	option 	allows 	you 	to 	set 	a 	password 	when 	you 	use 	the	
PJLink	feature.
NOTE: 
•	 Do	 not	forget	 your	password.	 However,	if	you	 forget	 your	password,	
consult with your dealer. 
•	 What	is	PJLink?
	 PJLink	 is	a	standardization	 of	protocol	 used	for	controlling	 projectors	
of  different  manufacturers.  This  standard  protocol  is...

162
5. Using On-Screen Menu
TOOLS
ADMINISTRATOR MODE
This	allows	you	to	select	MENU	MODE,	save	settings,	and	set	a	password	for	the	administrator	mode.
MENU	MODESelect	either	[BASIC]	or	[ADVANCED]	menu.
(→	page	106)—
NOT	SAVE	SETTING	
VALUES
Placing a check mark will not save your projector settings�
Clear this check box to save your projector settings�
—
NEW	PASSWORD/
CONFIRM	PASS-
WORD
Assign	a	password	for	the	administrator	mode.Up	to	10	alphanumeric	
characters
NOTE:
When	 [LAST]	 is	selected	 for...

163
5. Using On-Screen Menu
PROGRAM TIMER
This	option	 turns	on/off	 the	projector	 and	changes	 video	signals,	 and	selects	 ECO	mode	 automatically	 at	a	specified	
time.
NOTE:
•	 Before	using	[PROGRAM	TIMER],	make	sure	that	the	[DATE	AND	TIME]	feature	is	set.	(→ page 166)
•	 Make	sure	that	the	projector	is	in	the	stand	by	condition	with	the	POWER	cord	connected.
•	 The	 projector	 has	a	built-in	 clock.	The	clock	 will	keep	 working	 for	about	 two	weeks	 after	the	main	 power	 is	turned	 off.	If	the...

164
5. Using On-Screen Menu
DAY ������������������������Select days of the week for the program timer � To execute the program from Monday to Friday, select [MON-
FRI]�To execute the program in everyday basis, select [EVERYDAY]�
TIME ����������������������Set the time to execute the program� Enter time in 24-hour format�
FUNCTION  �������������Select a function to be executed� Selecting [POWER] will allow you to turn on or off the projector by setting 
[ADVANCED SETTINGS]� Selecting [SOURCE] will allow...

165
5. Using On-Screen Menu
Activating the program timer
1.	 Select	[ENABLE]	on	the	[PROGRAM	TIMER]	screen	and	press	the	ENTER	button.
	 The	[ENABLE]	will	be	activated.
2.	 Select	[OK]	and	press	the	ENTER	button.
	 The	[PROGRAM	TIMER]	screen	will	be	changed	to	the	[TOOL]	screen.
NOTE:
•	 Clearing	[ENABLE]	will	disable	 the	Program	 Timer	even	when	 a	program	 is	marked	 with	a	check	 mark	on	[PROGRAM	 LIST]	
screen. 
•	 When	[ENABLE] 	is 	selected, 	the 	[PROGRAM 	LIST] 	cannot 	be 	edited. 	To 	edit...

166
5. Using On-Screen Menu
DATE AND TIME
You	can	set	the	current	time,	month,	date,	and	year.
NOTE:	The	projector	 has	a	built-in	 clock.	The	clock	 will	keep	 working	 for	about	 2	weeks	 after	the	main	 power	 is	turned	 off.	If	the	
main	 power	 is	off	 for	 2	weeks	 or	more,	 the	built-in	 clock	will	cease.	 If	the	 built-in	 clock	ceases,	 set	the	 date	 and	time	 again.	 The	
built-in	clock	will	not	cease	while	in	the	standby	mode.
TIME ZONE SETTINGS ��������������Select your time zone�
DATE AND...