NEC Projector PH1400U User Manual

137
5. Using On-Screen Menu
[EDGE BLENDING]
This	function	adjusts	overlapping	edges	of	images	projected	from	each	projector	to	uniform	multi-screen	images.
Turns on or off the Edge Blending function. [MODE]
Turning	on	[MODE]	will	make	[TOP],	[BOTTOM],	[LEFT],	[RIGHT],	and	[BLACK	LEVEL]	available.	(Default:	OFF).
Selects	edge	of	top, 	bottom,	left,	and	right	of	the	screen	to	perform	the	Edge	Blending	function. 	
[TOP/BOTTOM/LEFT/RIGHT]
Turning	on	[CONTROL]	will	make	[MARKER],	[RANGE],	and	[POSITION]...

138
5. Using On-Screen Menu
❼ Menu Descriptions & Functions [INFO.]
Displays	the	status	 of	the	 current	 signal	and	lamp	 usage. 	This	item	has	nine	 pages. 	The	information	 included	is	as	
follows:
TIP:	Pressing	the	HELP	button	on	the	remote	control	will	show	the	[INFO.]	menu	items.
[USAGE TIME]
[LAMP	1	LIFE	REMAINING]	(%)*
[LAMP	2	LIFE	REMAINING]	(%)*
[LAMP	1	HOURS	USED]	(H)
[LAMP	2	HOURS	USED]	(H)
[FILTER	HOURS	USED]	(H)
[TOTAL	CARBON	SAVINGS]	(kg-CO2)
*	 The	progress	indicator	shows	the	percentage...

139
5. Using On-Screen Menu
[SOURCE(1)]
INPUT	TERMINAL	 RESOLUTION	
HORIZONTAL	FREQUENCY	 VERTICAL	FREQUENCY	
SYNC	TYPE	 SYNC	POLARITY	
SCAN	TYPE	 SOURCE	NAME	
ENTRY	NO.
[SOURCE(2)]
SIGNAL	TYPE	 VIDEO	TYPE	
BIT	DEPTH	 VIDEO	LEVEL	
LINK	RATE	 LINK	LANE
[WIRED LAN]
IP	ADDRESS	SUBNET	MASK	
GATEWAY	 MAC	ADDRESS 

140
5. Using On-Screen Menu
[WIRELESS LAN(1)]
IP	ADDRESS	SUBNET	MASK	
GATEWAY	 MAC	ADDRESS
[WIRELESS LAN(2)]
SSID	NETWORK	TYPE	
WEP/WPA	 CHANNEL	
SIGNAL	LEVEL
[VERSION(1)]
FIRMWARE	DATA	
FIRMWARE2 

141
5. Using On-Screen Menu
[VERSION(2)]
FIRMWARE3
[OTHERS]
PROJECTOR	NAME	MODEL	NO.	
SERIAL	NUMBER	 LAN	UNIT	 TYPE	
CONTROL	ID	(when	[CONTROL	ID]	is	set) 

142
5. Using On-Screen Menu
❽ Menu Descriptions & Functions [RESET]
Returning to Factory Default [RESET]
The	RESET	 feature	allows	you	to	change	 adjustments	 and	settings	 to	the	 factory	 preset	for	a	(all)	 source	 (s)	except	
the	following:
[CURRENT	SIGNAL]
Resets	the	adjustments	for	the	current	signal	to	the	factory	preset	levels. 	
The	items	 that	can	be	reset	 are:	[PRESET],	 [CONTRAST],	 [BRIGHTNESS],	 [COLOR],	[HUE],	[SHARPNESS],	
[ASPECT	RATIO],	[HORIZONTAL],	[VERTICAL],	[CLOCK],	[PHASE],	and...

143
5. Using On-Screen Menu
Clearing the Filter Usage Hours [CLEAR FILTER HOURS]
Resets	the	filter	 usage	 back	to	zero. 	Selecting	 this	option	 displays	 submenu	 for	a	confirmation. 	Select	 [YES]	and	press	
the	ENTER	button.
The	 [OFF]	 item	is	selected	 for	[FILTER	 MESSAGE]	 at	the	 time	 of	shipment. 	When	 [OFF]	is	selected,	 you	do	not	 need	
to	clear	the	filter	usage	hour.
NOTE:	Elapsed	time	of	the	filter	use	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu. 

144
5. Using On-Screen Menu
❾ Application Menu
When	[NETWORK]	 is	selected	 from	the	[SOURCE]	 menu,	the	application	 menu	[APPLICATION	 MENU]	will	be	dis-
played.
The	 application	 menu	allows	 you	to	set	 up	the	 User	 Supportware,	 Network	Settings	(NETWORK	 SETTINGS)	and	
Tools	(TOOLS).
The	User	Supportware	can	be	downloaded	from	our	website.
In	[ADMINISTRATOR	MODE],	either	[ADVANCED]	menu	or	[BASIC]	menu	can	be	selected. 	(→	page	162)
The	[BASIC]	menu	contains	minimum	essentials	of	menus	and...

145
5. Using On-Screen Menu
REMOTE DESKTOP CONNECTION
This	allows	you	to	set	up	for	computer	name	entry	and	effects	for	Remote	Desktop.
NOTE:
•	 A	USB	keyboard	is	required	to	set	up	the	Remote	Desktop	Connection. 

146
5. Using On-Screen Menu
NETWORK SETTINGS
Important:
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wired	 LAN	connection,	 connect	a	LAN	 cable	 (Ethernet	 cable)	to	the	 LAN	 port	(RJ-45)	 of	the	 projector.	 (→ page 
177) 
TIP:	The	network	settings	you	make	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
Hints on How to Set Up LAN Connection 
To set up the projector for a LAN connection:
Select	[WIRED	LAN]	or	[WIRELESS	LAN]	→	[PROFILES]	→	[PROFILE	1]...