NEC Projector PH1400U User Manual
Here you can view all the pages of manual NEC Projector PH1400U User Manual. The NEC manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 131
![Page 131
117
5. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency,
its adjustments will be...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-130.png "Page 131
117
5. Using On-Screen Menu
Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL]
Adjusts the image location horizontally and vertically.
- An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction.
- The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the
current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency,
its adjustments will be...")
117 5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be...
Page 132
![Page 132
118
5. Using On-Screen Menu
Selecting the Aspect Ratio [ASPECT RATIO]
Use this function to select the screen’s vertical:horizontal aspect ratio.
Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio.
(→ page 128)
The projector automatically identifies the signal being input and sets the optimum aspect ratio.
For Computer signal
For Component/Video/S-Video signals
When the screen type is set to 4:3When the screen type is set to...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-131.png "Page 132
118
5. Using On-Screen Menu
Selecting the Aspect Ratio [ASPECT RATIO]
Use this function to select the screen’s vertical:horizontal aspect ratio.
Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio.
(→ page 128)
The projector automatically identifies the signal being input and sets the optimum aspect ratio.
For Computer signal
For Component/Video/S-Video signals
When the screen type is set to 4:3When the screen type is set to...")
118 5. Using On-Screen Menu Selecting the Aspect Ratio [ASPECT RATIO] Use this function to select the screen’s vertical:horizontal aspect ratio. Select the screen type (4:3 screen, 16:9 screen or 16:10 screen) at the screen setting before setting the aspect ratio. (→ page 128) The projector automatically identifies the signal being input and sets the optimum aspect ratio. For Computer signal For Component/Video/S-Video signals When the screen type is set to 4:3When the screen type is set to...
Page 133
119 5. Using On-Screen Menu NATIVEThe projector displays the current image in its true resolution when the incoming computer signal has a lower or higher resolution than the projector’s native resolution. (→ page 2, 227) When the incoming computer signal has a higher resolution than the projector's native resolution, the center of an image will be displayed. LETTER BOXThe image of a letterbox signal (16:9) is stretched equally in the horizontal and vertical directions to fit the...
Page 134
![Page 134
120
5. Using On-Screen Menu
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
This function is used to reduce video noise.
RANDOM NR ���������Reduces flickering random noise in an image�
MOSQUITO NR ������Reduces mosquito noise that appears around the edges of an image during \
DVD playback�
BLOCK NR �������������Reduces block noise or mosaic-like patterns by selecting ON�
Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]
This function allows you to select an...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-133.png "Page 134
120
5. Using On-Screen Menu
[VIDEO]
Using Noise Reduction [NOISE REDUCTION]
This function is used to reduce video noise.
RANDOM NR ���������Reduces flickering random noise in an image�
MOSQUITO NR ������Reduces mosquito noise that appears around the edges of an image during \
DVD playback�
BLOCK NR �������������Reduces block noise or mosaic-like patterns by selecting ON�
Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]
This function allows you to select an...")
120 5. Using On-Screen Menu [VIDEO] Using Noise Reduction [NOISE REDUCTION] This function is used to reduce video noise. RANDOM NR ���������Reduces flickering random noise in an image� MOSQUITO NR ������Reduces mosquito noise that appears around the edges of an image during \ DVD playback� BLOCK NR �������������Reduces block noise or mosaic-like patterns by selecting ON� Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE] This function allows you to select an...
Page 135
![Page 135
121
5. Using On-Screen Menu
[VIDEO LEVEL]
This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external
device are connected.
AUTO ���������������������The video level is switched automatically based on the information from \
the device outputting the signal�
Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL”
or “ENHANCED” from the menu and view with the optimum setting�
NORMAL...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-134.png "Page 135
121
5. Using On-Screen Menu
[VIDEO LEVEL]
This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external
device are connected.
AUTO ���������������������The video level is switched automatically based on the information from \
the device outputting the signal�
Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL”
or “ENHANCED” from the menu and view with the optimum setting�
NORMAL...")
121 5. Using On-Screen Menu [VIDEO LEVEL] This function selects video signal level when the projector’s HDMI and DisplayPort input connectors and an external device are connected. AUTO ���������������������The video level is switched automatically based on the information from \ the device outputting the signal� Depending on the connected device, this setting may not be made properly � In this case, switch to “NORMAL” or “ENHANCED” from the menu and view with the optimum setting� NORMAL...
Page 136
![Page 136
122
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[BASIC]
Correcting Vertical Keystone Distortion Manually [KEYSTONE]
You can correct vertical distortion manually. (→ page 31)
TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 41)
NOTE: The [CORNERSTONE]...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-135.png "Page 136
122
5. Using On-Screen Menu
❻ Menu Descriptions & Functions [SETUP]
[BASIC]
Correcting Vertical Keystone Distortion Manually [KEYSTONE]
You can correct vertical distortion manually. (→ page 31)
TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment.
Selecting Cornerstone Mode [CORNERSTONE]
This option allows you to correct trapezoidal distortion.
Selecting this item will display the Cornerstone adjustment screen. (→ page 41)
NOTE: The [CORNERSTONE]...")
122 5. Using On-Screen Menu ❻ Menu Descriptions & Functions [SETUP] [BASIC] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 31) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment. Selecting Cornerstone Mode [CORNERSTONE] This option allows you to correct trapezoidal distortion. Selecting this item will display the Cornerstone adjustment screen. (→ page 41) NOTE: The [CORNERSTONE]...
Page 137
![Page 137
123
5. Using On-Screen Menu
SOURCE:
This option allows you to select a sub picture signal.
The options are: OFF, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen.
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
[LAMP MODE]
The projector is designed to accept two lamps (dual lamp system).
This dual lamp system provides prolonged...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-136.png "Page 137
123
5. Using On-Screen Menu
SOURCE:
This option allows you to select a sub picture signal.
The options are: OFF, VIDEO and S-VIDEO.
Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen.
Using the Wall Color Correction [WALL COLOR]
This function allows for quick adaptive color correction in applications where the screen material is not white.
[LAMP MODE]
The projector is designed to accept two lamps (dual lamp system).
This dual lamp system provides prolonged...")
123 5. Using On-Screen Menu SOURCE: This option allows you to select a sub picture signal. The options are: OFF, VIDEO and S-VIDEO. Selecting [OFF] will cancel the PIP/PICTURE BY PICTURE mode and return to the normal screen. Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. [LAMP MODE] The projector is designed to accept two lamps (dual lamp system). This dual lamp system provides prolonged...
Page 138
![Page 138
124
5. Using On-Screen Menu
Selecting the lamp to be used [LAMP SELECT]
This feature allows you to select which lamp to be used.
NOTE: This option is not displayed in the Basic menu.
DUAL ���������������������Select to use the two lamps at the same time to increase brightness�
SINGLE ������������������Lights either lamp 1 or 2 whichever was used last� This option also selects Lamp 1 or Lamp 2 according to
the time preset with Lamp Interval�
LAMP 1 ONLY ��������Select to use the Lamp 1 of the two...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-137.png "Page 138
124
5. Using On-Screen Menu
Selecting the lamp to be used [LAMP SELECT]
This feature allows you to select which lamp to be used.
NOTE: This option is not displayed in the Basic menu.
DUAL ���������������������Select to use the two lamps at the same time to increase brightness�
SINGLE ������������������Lights either lamp 1 or 2 whichever was used last� This option also selects Lamp 1 or Lamp 2 according to
the time preset with Lamp Interval�
LAMP 1 ONLY ��������Select to use the Lamp 1 of the two...")
124 5. Using On-Screen Menu Selecting the lamp to be used [LAMP SELECT] This feature allows you to select which lamp to be used. NOTE: This option is not displayed in the Basic menu. DUAL ���������������������Select to use the two lamps at the same time to increase brightness� SINGLE ������������������Lights either lamp 1 or 2 whichever was used last� This option also selects Lamp 1 or Lamp 2 according to the time preset with Lamp Interval� LAMP 1 ONLY ��������Select to use the Lamp 1 of the two...
Page 139
![Page 139
125
5. Using On-Screen Menu
Setting the day for changing the lamp [LAMP SWITCHING DAY]
This allows you to set the day for changing the lamp.
The options are: SUN (Sunday), MON (Monday), TUE (Tuesday), WED (Wednesday), THU (Thursday), FRI (Friday),
and SAT (Saturday).
NOTE:
• This function is available only when [1 WEEK] is selected for [LAMP INTERVAL MODE].
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-138.png "Page 139
125
5. Using On-Screen Menu
Setting the day for changing the lamp [LAMP SWITCHING DAY]
This allows you to set the day for changing the lamp.
The options are: SUN (Sunday), MON (Monday), TUE (Tuesday), WED (Wednesday), THU (Thursday), FRI (Friday),
and SAT (Saturday).
NOTE:
• This function is available only when [1 WEEK] is selected for [LAMP INTERVAL MODE].
Setting Closed Caption [CLOSED CAPTION]
This option sets several closed caption modes that allow text to be superimposed on the...")
125 5. Using On-Screen Menu Setting the day for changing the lamp [LAMP SWITCHING DAY] This allows you to set the day for changing the lamp. The options are: SUN (Sunday), MON (Monday), TUE (Tuesday), WED (Wednesday), THU (Thursday), FRI (Friday), and SAT (Saturday). NOTE: • This function is available only when [1 WEEK] is selected for [LAMP INTERVAL MODE]. Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the...
Page 140
![Page 140
126
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display-
Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen.
Turning messages on and off [MESSAGE DISPLAY]
This option selects whether or not to display projector messages at the...](http://img.usermanuals.tech/thumb/54/99343/w300_projector_manual_7634_d-139.png "Page 140
126
5. Using On-Screen Menu
[MENU]
Selecting Menu Color [COLOR SELECT]
You can choose between two options for menu color: COLOR and MONOCHROME.
Turning On / Off Source Display [SOURCE DISPLAY]
This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display-
Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen.
Turning messages on and off [MESSAGE DISPLAY]
This option selects whether or not to display projector messages at the...")
126 5. Using On-Screen Menu [MENU] Selecting Menu Color [COLOR SELECT] You can choose between two options for menu color: COLOR and MONOCHROME. Turning On / Off Source Display [SOURCE DISPLAY] This option turns on or off input name display such as COMPUTER 1, COMPUTER2, COMPUTER3, HDMI, Display- Port, VIDEO, S-VIDEO, VIEWER, NETWORK to be displayed on the top right of the screen. Turning messages on and off [MESSAGE DISPLAY] This option selects whether or not to display projector messages at the...