NEC Projector PA622U User Manual

58
4. Multi-Screen Projection
4	 Select	[CONTROL]	→	[ON]	and	press	the	ENTER	button.
	 Each	[TOP],	[BOTTOM],	 [LEFT],	[RIGHT],	 and	[BLACK	 LEVEL]	has	its	own	 [CONTROL],	 [MARKER],	[RANGE],	
and	[POSITION].
•	 For	Projector	 A,	set	 the	 [CONTROL]	 for	the	 [TOP],	 [LEFT]	 and[BOTTOM]	 to	[OFF]. 	Similarly	 for	Projector	 B,	set	
the	[CONTROL]	for	the	[TOP],	[RIGHT]	and	[BOTTOM]	to	[OFF].
② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images projected 
from each projector....

59
4. Multi-Screen Projection
1	 Adjust	[RANGE].
	 Use	the	◀ or ▶	button	to	adjust	the	overlapped	area.
TIP:
•	 Adjust	to	overlap	one	projector’	marker	with	the	other	projector’s	marker.
2	 Adjust	[POSITION].
	 Use	the	◀ or ▶	button	to	align	one	edge	with	the	other	edge	of	overlapped	images.
TIP:
•	 When	displaying	a	signal	with	a	different	resolution,	perform	the	Edge	Blending	function	from	the	start.	
•	 Setting	of	[MARKER]	will	not	be	saved	and	return	to	[OFF]	when	the	projector	is	turned	off.	
•	 To...

60
4. Multi-Screen Projection
Black Level Adjustment
This	adjusts	 the	black	 level	of	the	 overlapping	 area	and	the	non-overlapping	 area	of	the	 multi-screen	 (EDGE	BLEND-
ING).
Adjust	the	brightness	level	if	you	feel	the	difference	is	too	large.
NOTE: 
This	function	is	enabled	only	when	[MODE]	is	turned	on.
Adjustable	area	varies	depending	on	what	combination	of	[TOP],	[BOTTOM],	[LEFT]	and	[RIGHT]	are	turned	on.
Example: 	Adjusting	the	Black	Level	when	placing	two	projectors	side	by	side
Width	of...

61
4. Multi-Screen Projection
9-segmented	portions	for	Black	Level	adjustment
The	center	projector
This	function	 adjusts	the	brightness	 level	of	9-segmented	 portions	for	the	 center	 projector	 and	4-segmented	 portions	
for	the	left	bottom	projector	as	shown	below.
TOP-LEFT
BOTTOM-LEFT CENTER-
LEFT TOP-RIGHT
CENTER-RIGHT
BOTTOM-RIGHT
TOP-CENTER
CENTER
CENTER
BOTTOM-CENTER
TOP-RIGHT
CENTER-RIGHT
TOP-CENTER
TIP:
•	 The	
number	 of	black	 level	division	 screens	(maximum	 of	nine	 divisions)	 changes...

62
5. Using On-Screen Menu
❶ Using the Menus
NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.
1. Press the MENU button on the remote control or the projector cabinet to display the menu.
NOTE: The commands such as ENTER,	EXIT,	▲▼, ◀▶ in the bottom show available buttons for your operation.
2.  Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.
3.  Press the ENTER button on the remote control or the projector...

63
5. Using On-Screen Menu
❷ Menu Elements
Slide	bar
Solid	triangle
Menu	mode
Tab
Radio	button
High	Altitude	symbol
ECO	mode	symbol
Menu	windows	or	dialog	boxes	typically	have	the	following	elements:
Highlight �����������������������������Indicates the selected menu or item� 
Solid triangle  ����������������������Indicates further choices are available� A highlighted triangle indicates the item is active� 
Tab ��������������������������������������Indicates a group of features in a dialog box� Selecting...

64
5. Using On-Screen Menu
*	 The	asterisk	(*)	indicates	that	the	default	setting	varies	depending	on	the	signal.*1	 The	[GAMMA	CORRECTION]	item	is	available	when	an	item	other	than	[DICOM	SIM.]	is	selected	for	[REFERENCE].*2	 The	[SCREEN	SIZE]	item	is	available	when	[DICOM	SIM.]	is	selected	for	[REFERENCE].*3	 When	[PRESENTATION]	or	[HIGH-BRIGHT]	is	selected	in	[REFERENCE],		the	[COLOR	TEMPERATURE]	is	not	available.
•	Basic	menu	items	are	indicated	by	shaded	area.❸ List of Menu Items
Some	menu	items	are...

65
5. Using On-Screen Menu
Menu ItemDefaultOptions
DISPLAY PIP/PICTURE 
BY PICTURE
SUB INPUT
OFF, HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), 
COMPUTER, HDBaseT
MODE PIP, PICTURE BY PICTURE
PICTURE SWAP OFFOFF, ON
PIP SETTING START POSITION
TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHT
HORIZONTAL POSITION
VERTICAL POSITION
SIZE LARGE, MEDIUM, SMALL
BORDER
GEOMETRIC 
CORRECTION KEYSTONE
HORIZONTAL
VERTICAL
TILT
THROW RATIO
CORNERSTONE TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, 
BOTTOM,...

66
5. Using On-Screen Menu
Menu ItemDefaultOptions
SETUP MENU
LANGUAGE
ENGLISHENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 
日本語
DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, 
NEDERLANDS, SUOMI
NORSK, TÜRKÇE, РУССКИЙ, 
, Ελληνικά, 中文, 한국어
ROMÂNĂ, HRVATSKA, БЪЛ\fАРСКИ, INDONESIA, हिन्दी , ไทย, 
, 繁體中文
COLOR SELECT COLORCOLOR, MONOCHROME
INPUT DISPLAY ONOFF, ON
MESSAGE DISPLAY ONOFF, ON
ID DISPLAY ONOFF, ON
ECO MESSAGE OFFOFF, ON
3D CAUTION MESSAGE ONOFF, ON
DISPLAY TIME AUTO 45 
SEC MANUAL, AUTO  5...

67
5. Using On-Screen Menu
Menu ItemDefaultOptions
SETUP CONTROL TOOLSADMINISTRA-
TOR MODE
MENU MODE
ADVANCEDADVANCED, BASIC
NOT SAVE SETTING VALUES OFFOFF, ON
NEW PASSWORD
CONFIRM PASSWORD
PROGRAM 
TIMER ENABLE
OFFOFF, ON
SETTINGS EDITACTIVE
OFF, ON
DAY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY 
DAY
TIME
FUNCTION POWER, INPUT, ECO MODE
ADVANCED 
SETTINGS POWER OFF, ON
INPUT HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), 
COMPUTER, HDBaseT
ECO MODE OFF, ON
REPEAT OFF, ON
DELETE
UP...