NEC Projector PA622U User Manual

98
5. Using On-Screen Menu
[LAMP MODE]
When	eco-mode	 is	set	 to	[ON],	 the	CO2	emissions	 (calculated	 from	the	reduction	 in	power	 consumption)	 of	the	 projec-
tor	can	 be	reduced. 	The	 eco-mode	 reduces	power	consumption	 by	mainly	 lowering	 the	brightness	 of	the	 lamp. 	As	 a	
result,	the	lamp	replacement	time	(as	a	guide)*	is	extended. 	(→	page	118)*	 Replacement	time	not	guaranteed.
LAMP ADJUST �������This can be set when the eco-mode is set to [OFF]� Adjust the lamp to match the brightness of...

99
5. Using On-Screen Menu
[CONTROL]
TOOLS
ADMINISTRATOR MODE
This	allows	you	to	select	MENU	MODE,	save	settings,	and	set	a	password	for	the	administrator	mode.
MENU	MODESelect	either	[BASIC]	or	[ADVANCED]	menu.
(→	page	64)—
NOT	SAVE	SETTING	
VALUES
Placing a check mark will not save your projector settings�
Clear this check box to save your projector settings�
—
NEW	PASSWORD/
CONFIRM	PASS-
WORD
Assign	a	password	for	the	administrator	mode.Up	to	10	alphanumeric	
characters 

100
5. Using On-Screen Menu
PROGRAM TIMER
This	option	 turns	on/standby	 the	projector	 and	changes	 video	signals,	 and	selects	 ECO	mode	 automatically	 at	a	
specified	time.
NOTE:
•	 Before	using	[PROGRAM	TIMER],	make	sure	that	the	[DATE	AND	TIME]	feature	is	set.	(→ page 103)
	 Make	sure	that	the	projector	is	in	the	standby	condition	with	the	POWER	cord	connected.
 The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main 
power...

101
5. Using On-Screen Menu
FRI]� To execute the program in everyday basis, select [EVERYDAY]�
TIME ����������������������Set the time to execute the program� Enter time in 24-hour format�
FUNCTION  �������������Select a function to be executed� Selecting [POWER] will allow you to turn on or off the projector by setting 
[ADVANCED SETTINGS]� Selecting [INPUT] will allow you to select a video source by setting [ADVANCED 
SETTINGS]�  Selecting  [ECO  MODE]  will  allow  you  to  select  [ECO  MODE]  by...

102
5. Using On-Screen Menu
Activating the program timer
1.	 Select	[ENABLE]	on	the	[PROGRAM	TIMER]	screen	and	press	the	ENTER	button.
	 The	selection	screen	will	be	displayed.
2. Press the ▼	button	to	align	the	cursor	with	[ON]	and	then	press	the	ENTER	button.
	 Return	to	the	[PROGRAM	 TIMER]	screen.
NOTE:
•	 When	the	effective	 settings	of	the	 [PROGRAM	 TIMER]	have	not	been	 set	to	[ON],	 the	program	 will	not	be	executed	 even	if	the	
[ACTIVE]	items	in	the	program	list	have	been	ticked.
•	 Even	 when...

103
5. Using On-Screen Menu
DATE AND TIME SETTINGS
You	can	set	the	current	time,	month,	date,	and	year.
NOTE:	The	projector	 has	a	built-in	 clock.	The	clock	 will	keep	 working	 for	about	 2	weeks	 after	the	main	 power	 is	turned	 off.	If	the	
main	 power	 is	off	 for	 2	weeks	 or	more,	 the	built-in	 clock	will	cease.	 If	the	 built-in	 clock	ceases,	 set	the	 date	 and	time	 again.	 The	
built-in clock will not cease while in the standby mode.
TIME ZONE SETTINGS
 ��������������Select your time zone�...

104
5. Using On-Screen Menu
Disabling	the	Cabinet	Buttons	[CONTROL	PANEL	LOCK]
This	option	turns	on	or	off	the	CONTROL	PANEL	LOCK	function.
NOTE:
•	 How	to	cancel	the	[CONTROL	PANEL	LOCK]
	 When	the	[CONTROL	 PANEL	LOCK]	is	set	 to	[ON],	 press	 the	EXIT	 button	 or	the	 INPUT	 button	on	the	 main	 body	for	about	 10	
seconds	to	cancel	the	[CONTROL	PANEL	LOCK]	setting.
TIP: 
•	 When	the	[CONTROL	PANEL	LOCK]	is	turned	on,	a	key	lock	icon	[		]	will	be	displayed	at	the	bottom	right	of	the	menu.
•	 This...

105
5. Using On-Screen Menu
Setting ID to the Projector [CONTROL ID]
You	can 	operate 	multiple 	projectors 	separately 	and 	independently 	with 	the 	single 	remote 	control 	that 	has 	the 	CONTROL	
ID	 function. 	If	 you	 assign	 the	same	 ID	to	all	 the	 projectors,	 you	can	 conveniently	 operate	all	the	 projectors	 together	
using	the	single	remote	control. 	To	do	so,	you	have	to	assign	an	ID	number	to	each	projector.
CONTROL ID NUMBER �������Select a number from 1 to 254 you wish to assign to...

106
5. Using On-Screen Menu
Turning On or Off Remote Sensor [REMOTE SENSOR]
This	option	determines	which	remote	sensor	on	the	projector	is	enabled	in	wireless	mode.
The	options	are:	FRONT/BACK,	FRONT,	BACK,	and	HDBaseT. 	
NOTE:
•	 The	remote	 control	of	the	 projector	 will	not	be	able	 to	receive	 signals	 if	the	 power	 supply	 of	the	 HDBaseT	 transmission	 device	
connected	to	the	projector	is	switched	on	when	this	has	been	set	to	“HDBaseT”.
TIP:
•	 If	the	remote	 control	system	 does	not	function...

107
5. Using On-Screen Menu
[NETWORK SETTINGS]
Important:
•	 Consult	with	your	network	administrator	about	these	settings.
•	 When	using	a	wired	 LAN	connection,	 connect	a	LAN	 cable	 (Ethernet	 cable)	to	the	 LAN	 port	(RJ-45)	 of	the	 projector.	 (→ page 
137) 
TIP:	The	network	settings	you	make	will	not	be	affected	even	when	[RESET]	is	done	from	the	menu.
Hints on How to Set Up LAN Connection 
To set up the projector for a LAN connection:
Select	[WIRED	LAN]	→	[PROFILES]	→	[PROFILE	1]	or	[PROFILE	2]....